GT02 Series Gate Drive Transformer Features Applications • Low Profile - 3mm • Gate Drive Transformer • Designed for Frequencies from 75 kHz to over 1 MHz • AC/DC and DC/DC Converters • Suiteable for Pick and Place applications • Pulse/Signal Transformers Packaging Reel diameter: 13”, Reel width: 16 mm, Pieces/reel: 1500 Recommended PCB Layout Mechanical Dot for pin 1 1.27 1 6 2 6.8 5 max XXX-XXX YYWW 3 0.76 3.0 max 1.52 4 1 6 2 5 3 4 N1 1 N2 6 N1 1 N2 3 N3 5 3 4 2 4 6 2.54 (X4) 5.71 8.6 max Schematic Top View units: mm Electrical Specifications Part Number 1 Turns Ratio Inductance DCR 2 Lkg. Ind. (mΩ, max.) (µH, max.) N1:N2:N3 (µH, min.) GT02-110-006 1:1 135 225:225 GT02-110-010 1:1 290.4 GT02-110-019 1:1 785 E-T Prod 5 Hi-Pot Schematic (V-µs) (Vdc) 0.2 6.9 1500 A 320:320 0.2 10.2 1500 A 600:520 0.36 19.4 1500 A GT02-120-006 1:2.5 21.6 110:320 0.1 6.9 1500 A GT02-120-014 1:2.5 86.4 190:410 0.15 13.8 1500 A GT02-111-006 1:1:1 135 230:230 0.1 6.9 1500 B GT02-122-006 1:2.5:2.5 21.6 110:230 0.1 6.9 1500 B GT02-122-008 1:2:2 48.6 160:260 0.15 8.3 1500 B Specifications subject to change without notice. 800.729.2099 tel www.icecomponents.com 1. Tested at 100kHz, 0.1Vrms. 2. Electrical specifications at 25ºC. 3. Operating range: -40 ºC to +130 ºC. 4. Meets UL 94V-0. 5. E-T product rating is for secondary (gate) windings and is based upon a flux density of 2200 Gaussat 25 ºC in a bipolar drive application. 82 (02/08) GT02-1