Voice: 800.729.2099 Fax: 678.560.9304 ICE Components, Inc. [email protected] www.icecomponents.com Gate Drive Transformer GT01 Series Features Applications • Smallest size available on the market • Voltage Regulator Modules • Designed for frequencies from 500 kHz to over 1 MHz • High Frequency AC/DC and DC/DC Converters • Flat top for pick and place applications • Pulse/Signal Transformers • Multiple turns ratios available Packaging: Reel diameter: 13”, Reel width: 16mm, Pieces/reel: 2500 Mechanical 6 5.2 max 5 Recommended PCB layout 1.0 4 color dot for pin 1 Schematic N1 1 N2 3 N1 1 N2 2 N3 3 6 4 6 5 4 1.5 5.0 max 3.3 max XXX 1 1 2 2 3 3 Top View 3.0 1.4 Side View Top View A units: mm Electrical Specifications Part Turns Ratio Inductance1 DCR1 Number N1:N2:N3 (µH,min.) (mΩ,max.) GT01-110-007 1:1 200 180:180 GT01-110-011 1:1 450 470:470 GT01-110-015 1:1 800 620:620 GT01-120-007 1:2 50 95:180 GT01-120-010 1:2 90 180:330 GT01-120-015 1:2 200 250:520 GT01-111-007 1:1:1 200 270:270:270 GT01-111-011 1:1:1 450 470:470:470 GT01-122-007 1:2:2 50 130:260:260 GT01-122-010 1:2:2 90 220:430:430 GT01-122-015 1:2:2 200 330:690:690 GT01-133-007 1:3:3 22 100:270:270 GT01-133-011 1:3:3 50 170:460:460 GT01-133-015 1:3:3 90 220:650:650 Specifications subject to change without notice. Lkg. Ind. E-T Product5 Hi-Pot (nH) (Vµs) (Vdc) 130 7.5 500 180 11.2 500 200 15.0 500 75 7.5 500 75 10.0 500 95 15.0 500 100 7.5 500 150 11.2 500 65 7.5 500 75 10.0 500 130 15.0 500 100 7.5 500 70 11.2 500 80 15.0 500 1. Tested at 100kHz, 0.1Vrms. 2. Electrical specifications at 25°C. 3. Operating range: -40°C to +130°C. Note: 1. White dot for 22.0 V * us 4. Meets Yellow dot for UL 15.094V-0. V * us Pink dot forproduct 11.0 V * us 5. E-T rating is for sec2. marking 110 (gate) for turns ratio 1:1 ondary windings and marking 120 for turns ratioa 1:2 is based upon flux density marking for turns ratioat1:1:1 of 111 2200 Gauss 25°C in a marking 122 for drive turns ratio 1:2:2 bipolar application. marking 133 for turns ratio 1:3:3 (10/06) GT01-1