ICHAUS IC-MB4ICSYMB4U

MB4U
preliminary
BiSS, SSI, PC-USB 2.0 ADAPTER
Rev B1, Page 1/5
FEATURES
APPLICATIONS
♦
♦
♦
♦
♦
♦
♦
♦
♦ BiSS / SSI application
development
♦ BiSS / SSI debugging
♦ Flexible interface configuration
♦ Encoder calibration
♦ Portable applications
USB 2.0 high speed PC interface
FPGA based logic
Hardware implemented interface protocols
Fast realtime data communication (10 MHz BiSS; 4 MHz SSI)
API for Windows: BiSS-Interface DLL
Field capable design: box, field interfaces, USB bus powerable
USB powered 5 V and 12 V supplies for external applications
Supported interfaces:
BiSS / SSI controlled by FPGA application
SYSTEM VIEW
Copyright © 2010 iC-Haus
http://www.ichaus.com
preliminary
MB4U
BiSS, SSI, PC-USB 2.0 ADAPTER
Rev B1, Page 2/5
DESCRIPTION
The MB4U is a PC-USB 2.0 high speed interface BiSS master based on FPGA logic system design.
BiSS Interface Functions and Features:
•
•
•
•
•
•
•
•
•
•
Up to 8 BiSS slaves
RS422 10 MBit/s maximum data transfer rate
SSI master
BiSS C unidirectional and BiSS C master
BiSS master MB100 BiSS IP based
USB 2.0 interface up to 30 MBit/s data transfer
USB 1.1 interface compatibility to 12 MBit/s data transfer
Adapter and devices bus powerable
Available drivers for Windows 2000, XP, Vista, 7
FPGA integrated 1st level RAM
CONNECTORS
PIN CONFIGURATION BiSS
PIN FUNCTIONS
No. Name Function
1
2
3
4
5
6
7
8
9
PIN CONFIGURATION Mini USB
VB
MA+
MAVDD
MOGND
SL+
SLMO+
Field power supply
Clock output P
Clock output N
Logic power supply
Master data output N
Ground (0 V)
Device data input P
Device data input N
Master data output P
PIN FUNCTIONS
No. Name Function
1
2
3
4
5
VCC
DD+
ID
GND
5 V USB supply
Data Data +
Identifier: A = GND, B n.c.
Ground (0 V)
preliminary
MB4U
BiSS, SSI, PC-USB 2.0 ADAPTER
Rev B1, Page 3/5
ABSOLUTE MAXIMUM RATINGS
Beyond these values damage may occur; device operation is not guaranteed.
Item
No.
Symbol
Parameter
Conditions
Unit
Min.
G001 Power USB Maximum Power Consumption from
USB Bus
G002 VDD
Logic Power Supply
G003 I(VDD)
Logic Power Supply
G004 VB
Interface Power Supply
G005 I(VB)
Interface Power Supply
Max.
see USB specifications
500
mA
4.0
5.5
V
VDD = 5 V, I(VB) = 0 mA
250
350
mA
9
13
V
VB = 12 V, I(VDD) = 0 mA
90
125
mA
THERMAL DATA
Item
No.
Symbol
Parameter
Conditions
Unit
Min.
T01
Temp
Temperature Range
T02
HUM
Humidity
non condensating
All voltages are referenced to ground unless otherwise stated.
All currents flowing into the device pins are positive; all currents flowing out of the device pins are negative.
Typ.
Max.
0
50
°C
5
95
%
preliminary
MB4U
BiSS, SSI, PC-USB 2.0 ADAPTER
Rev B1, Page 4/5
BiSS MASTER IP MB100
The MB4U is based on the MB100 BiSS master IP.
With this implementation it is possible to connect one
or more BiSS C devices or a single SSI device to
the adapter. BiSS C protocol is fully supported. The
adapter supports an unlimited count of BiSS C slave
devices.
With BiSS there is 10 MBit/s RS422 maximum clocking
available. The SSI protocol is also configurable.
With high speed buffered transfer the real-time measured data can be block-wise transferred to a Windows
PC application for analysis, documentation, data processing, etc..
BiSS SOFTWARE ENVIRONMENT
iC-Haus Evaluation Software
iC-Haus BiSS software for PCs running on Windows operating systems as well as the required USB and/or
LPT driver are available as a ZIP file. iC-Haus software built with LabVIEW™requires the installation of the
LabVIEW™Run-Time Engine (RTE).
MB4U capable software and product DLLs are available on request (BiSS Reader GUI, iC-MN GUI, iC-LGC GUI,
iC-NQC GUI, iC-MH GUI).
iC-Haus BiSS Interface DLL
For custom software running on Windows operating systems the BiSS Interface DLL enables rapid software
development. Direct access to eval board adapter and high level protocol functions are directly available.
BiSS Interface DLL:
availability on request
iC-Haus expressly reserves the right to change its products and/or specifications. An Infoletter gives details as to any amendments and additions made to the
relevant current specifications on our internet website www.ichaus.de/infoletter; this letter is generated automatically and shall be sent to registered users by
email.
Copying – even as an excerpt – is only permitted with iC-Haus approval in writing and precise reference to source.
iC-Haus does not warrant the accuracy, completeness or timeliness of the specification on this site and does not assume liability for any errors or omissions
in the materials. The data specified is intended solely for the purpose of product description. No representations or warranties, either express or implied, of
merchantability, fitness for a particular purpose or of any other nature are made hereunder with respect to information/specification or the products to which
information refers and no guarantee with respect to compliance to the intended use is given. In particular, this also applies to the stated possible applications or
areas of applications of the product.
iC-Haus conveys no patent, copyright, mask work right or other trade mark right to this product. iC-Haus assumes no liability for any patent and/or other trade
mark rights of a third party resulting from processing or handling of the product and/or any other use of the product.
As a general rule our developments, IPs, principle circuitry and range of Integrated Circuits are suitable and specifically designed for appropriate use in technical
applications, such as in devices, systems and any kind of technical equipment, in so far as they do not infringe existing patent rights. In principle the range of
use is limitless in a technical sense and refers to the products listed in the inventory of goods compiled for the 2008 and following export trade statistics issued
annually by the Bureau of Statistics in Wiesbaden, for example, or to any product in the product catalogue published for the 2007 and following exhibitions in
Hanover (Hannover-Messe).
We understand suitable application of our published designs to be state-of-the-art technology which can no longer be classed as inventive under the stipulations
of patent law. Our explicit application notes are to be treated only as mere examples of the many possible and extremely advantageous uses our products can
be put to.
preliminary
MB4U
BiSS, SSI, PC-USB 2.0 ADAPTER
Rev B1, Page 5/5
ORDERING INFORMATION
Type
Package
Order Designation
MB4U
105 mm x 33 mm x 16 mm
Aluminium blue anodized
iC-MB4 iCSY MB4U
For technical support, information about prices and terms of delivery please contact:
iC-Haus GmbH
Am Kuemmerling 18
D-55294 Bodenheim
GERMANY
Tel.: +49 (61 35) 92 92-0
Fax: +49 (61 35) 92 92-192
Web: http://www.ichaus.com
E-Mail: [email protected]
Appointed local distributors: http://www.ichaus.com/sales_partners