MDT80C06 PS2 optical 2D/3D, 3/5 key mouse controller 4. Pin Assignment 1. General Description The MDT80C06 is a Low Cost Optical Mouse MDT80C06P / MDT80C06S Controller for PS/2 (2D/3D, 3/5 Key) only. Work with low cost Agilent ADNS-2610, ADNS-2620, ADNS-2051 or PixArt PAN101B optical mouse sensor. 2. Features l Compatible with IBM PS/2 mouse. l Compatible with Microsoft PS/2 scrolling mouse. l Compatible with Microsoft Windows 2000 and K4 K5 SCK SDIO Vdd NC OSCRH PD 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 Z2 Z1 CLK DATA Vss L M R 5-button mouse. l Internal Power-On reset (POR). l Working with Agilent ADNS-2610, ADNS-2620, ADNS-2051 or PixArt PAN101B optical mouse sensor. l The sensor position can be normal or clockwise rotate 90 degree. l Internal RC oscillation about 6.5MHz ~7.5MHz . l Support 400 or 800 DPI for ADNS-2051. Support 400DPI for PAN101BOI-204 and 800DPI for PAN101BOI-208. l Auto-detect photo sensor type. l Low power dissipation. l Z-axis supports 2 kinds of scrolling input : Z/2 or Z/4. l 16 pin DIP/SOP Package 3. Applications 2D/3D 3-Key/5-Key PS/2 optical mouse This specification is subject to be changed without notice. Please visit our web site for the most updated information. http://www.mdtic.com.tw P.1 2003/9 V1.2 MDT80C06 PS2 optical 2D/3D, 3/5 key mouse controller 5. Pin Function Description Symbol I/O Function Description Vdd +5V PD I/O Photo-sensor power down control (Open Drain output). Also used as rotation selection. Internal 100K ohm pull-high. =1 for sensor in vertical position =0 for sensor rotating 90 degree clockwise Z1 I Z-axis input for Photo Sensor or Mechanical resistors. Internal weak Z2 I pull low. CLK I/O Connect to 8042 auxiliary port CLK line in PS/2 mode. Internal 10K ohm pull high. DATA I/O Connect to 8042 auxiliary port DATA line in PS/2 mode. Internal 10K ohm pull high. Vss Ground R I M I L I K4 I Three Key-switches inputs. Internal 50K ohm pull high. The 4th and 5th button inputs. Internal 100K ohm pull high. Also used K5 to select 2D/3D and 3/5 key mouse. SCK I/O Serial clock output to optical mouse sensor. Internal 100K ohm pull high. Also used to select Z/2 or Z/4 SDIO I/O Serial data input/output to optical mouse sensor. Internal 100K ohm pull high. OSCRH I Connect a resistor to Vdd to adjust internal RC freq. 6.Data Reporting 2D： Byte 1 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit1 Bit0 Y ovfl X ovfl Y sign X sign 1 Middle Right Left Byte 2 X data Byte 3 Y data This specification is subject to be changed without notice. Please visit our web site for the most updated information. http://www.mdtic.com.tw P.2 2003/9 V1.2 MDT80C06 PS2 optical 2D/3D, 3/5 key mouse controller 3D： Byte 1 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit1 Bit0 0 0 Y7 X7 1 Middle Right Left Byte 2 X data Byte 3 Y data Byte 4 Z data 3D, 5-key： Byte 1 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit1 Bit0 0 0 Y7 X7 1 Middle Right Left Byte 2 X data Byte 3 Y data Byte 4 0 0 K5 K4 Z data 7. PS/2 Mouse Commands: The following table list the commands： 8042 send Command MDT80C06 echo FF Reset FA, AA, 00 FE Resend XX, (XX, XX) F6 Set Default FA F5 Disable FA F4 Enable FA F3, XX Set Sampling Rate FA, FA F2 Read Device Type FA, 00 or FA,03 or FA 04 F0 Set Remote Mode FA EE Set Wrap Mode FA EC Reset Wrap Mode FA EB Read Data FA, XX, XX, XX EA Set Stream Mode FA E9 Status Request FA, XX, XX,XX E8, XX Set Resolution FA,FA E7 Set Auto-speed FA E6 Reset Auto-speed FA This specification is subject to be changed without notice. Please visit our web site for the most updated information. http://www.mdtic.com.tw P.3 2003/9 V1.2 MDT80C06 PS2 optical 2D/3D, 3/5 key mouse controller IN DETAIL: (a). Reset (FF) The MDT80C06 reset to initial mode as power on and transmit FA, AA, 00 to system 8042. Then set default states as below : sampling rate：100 reports/s 2 dots/count non-autospeed stream mode disable (b). Resend (FE) a. When MDT80C06 receives an invalid command, it returns a Resend code to the system. b. If MDT80C06 receives a Resend command, its last packet of data will send again to the system. (c). Set Default (F6) Initializes mouse conditions to the power-on default states. (d). Disable(F5) To disable mouse transmissions to system. (e). Enable (F4) To enable mouse transmissions to system if in stream mode. (f). Set Sampling Rate (F3, XX) Sets the sampling rate as described below Second byte XX Sample Rate C8 200/sec 64 100/sec 50 80/sec 3C 60/sec 28 40/sec 14 20/sec 0A 10/sec (g). Read Device Type (F2) MDT80C06 send ‘’ FA, 00’’ for standard mouse or send “FA,03” for Microsoft Inteli 3D mouse or send “FA, 04” for 3D/5key mouse (h ). Set Remote Mode (F0) Set reports only in response to system Read Data(EB) command. This specification is subject to be changed without notice. Please visit our web site for the most updated information. http://www.mdtic.com.tw P.4 2003/9 V1.2 MDT80C06 PS2 optical 2D/3D, 3/5 key mouse controller (i) . Set Wrap Mode (EE) The mouse resend the data sent by system IF Reset (FF) or Reset Wrap Mode (EC) is received wrap mode will be terminated. (j). Reset Wrap Mode (EC) Set mouse to the previous mode (k). Read Data (EB) Send mouse data in any mode. (l). Set Stream Mode (EA) Set mouse in stream mode . The report rate is set by F3 command. (m). Status Request (E9) The mouse return the status to system with 3-byte status report Byte1: Bit Description 0 1=Right button pressed 1 1=Middle button pressed 2 1=Left button pressed 3 Reserved 4 0=Normal speed, 1=Autospeed 5 0=Disabled, 1=Enabled 6 0=Stream mode, 1=Remote mode 7 Reserved Byte2: Current resolution setting (D0-D7) Byte3: Current sampling rate (D0-D7) (n) Set Resolution (E8, XX) Resolution is set as follows： Second Byte XX Resolution 00 8 dots/count 01 4 dots/count 02 2 dots/count 03 1 dots/count (o) Set Auto speed (E7) Not supported. The MDT80C06 just responses FA (p) Reset Autospeed (E6) Not supported. The MDT80C06 just responses FA This specification is subject to be changed without notice. Please visit our web site for the most updated information. http://www.mdtic.com.tw P.5 2003/9 V1.2 MDT80C06 PS2 optical 2D/3D, 3/5 key mouse controller (Ⅱ). Microsoft PS/2 scrolling mouse mode： (a) When MDT80C06 received the following consecutive command. i. F3 C8 ----set report rate 200/sec ii. F3 64 ----set report rate 100/sec iii. F3 50 ----set report rate 80/sec Then it will enter the INTELI Scrolling mode (b) The mouse will return FA 03 to read device type command (F2). (c) Data report will be four bytes format. (d) The mouse will exit the Microsoft PS/2 scrolling mode only if power off or a reset command(FF) is received. (III). 3D/5key mouse mode： (e) When MDT80C06 received the following consecutive command. i. F3 C8 ----set report rate 200/sec ii. F3 C8 ----set report rate 200/sec iii. F3 50 ----set report rate 80/sec Then it will enter the 3D/5key mode. (f) The mouse will return FA 04 to read device type command (F2). (g) Data report will be four bytes format. (h) The mouse will exit the 3D/ 5key mode only if power off or a reset command(FF) is received. (Ⅲ).Z-axis Input Function： (a). Photo couples input (b). Mechanical switches This specification is subject to be changed without notice. Please visit our web site for the most updated information. http://www.mdtic.com.tw P.6 2003/9 V1.2 MDT80C06 PS2 optical 2D/3D, 3/5 key mouse controller 8. Electrical Characteristics (TA=0℃ to 70℃) Absolute Maximum Ratings Parameter Ratings Min. Unit Max. Temperature under bias -40 85 ℃ Storage temperature range -65 150 ℃ Supply voltage -0.6 6.5 Volt DC Electrical Characteristics Parameters Sym. L,M,R,K4,K5,Z1,Z2 (key mode) input voltage Min. Vai Typ. Max. Unit 1.27 V L,M,R,K4,K5,Z1,Z2 input leakage current (Vin=0V) Iil -1.0 uA L,M,R,K4,K5,Z1,Z2 input leakage current (Vin=5V) Iih 1.0 uA SCK,SDIO input voltage Vi 2.0 V PS/2 mouse mode Parameters Operating voltage Sym. Min. Typ. Max. Unit VDD 4.5 5.0 5.5 V Operating current (no load) IOP 1 mA DATA, CLK Threshold voltage Vt 0.9 1.25 1.6 V DATA, CLK Input low current (Pull Hi) Vt 0.9 1.2 1.5 mA DATA, CLK Low output voltage (IL1=4mA) VL1 － 0.1 － V DATA, CLK Low output voltage (IL2=8mA) VL2 － 0.2 － V This specification is subject to be changed without notice. Please visit our web site for the most updated information. http://www.mdtic.com.tw P.7 2003/9 V1.2 MDT80C06 PS2 optical 2D/3D, 3/5 key mouse controller AC Electrical Characteristics Parameters Sym. Min. Typ. Max. Unit Fosc 6.5 7 7.5 MHz Rising Edge Crossed Width Tr － 15 － ìs Falling Edge Crossed Width Tf － 10 － ìs Tmh － 40 － ìs Mouse CLK low period Time Tml － 40 － ìs System CLK high period Time Tsh － 40 － ìs System CLK low period Time Tsl － 40 － ìs Tmdc － 20 － ìs Tsdc － 22 － ìs Tscd － 26 － ìs Tpi 0 － 72 ìs Oscillating Frequency Mouse CLK high period Time Time that Mouse Sample DATA from CLK rising Edge Time from DATA Transition to Falling Edge of CLK Time from rising Edge of CLK to DATA Transition Time to mouse Inhibit after the 11th CLK to ensure mouse does not start another Transmission This specification is subject to be changed without notice. Please visit our web site for the most updated information. http://www.mdtic.com.tw P.8 2003/9 V1.2 MDT80C06 PS2 optical 2D/3D, 3/5 key mouse controller 9. OPT Equivalent Circuit Pull_Hi 100K VSS Data Bus D QB Read Data I/P Latch Input Resistor TTL Input Level Port Input Pin G This specification is subject to be changed without notice. Please visit our web site for the most updated information. http://www.mdtic.com.tw P.9 2003/9 V1.2 http://www.mdtic.com.tw P.10 4 R5 10K R1 R6 10K normal Sensor rotates 90 degree clockwise Sensor in position Remove Install Remove R6 Remove Install R2 YB YA 5 3 2 16 1 6 Option Table GND U1 ADNS-2051 GND PD XB XA SDIO SCK LED Install 400 DPI 800 DPI 12 10 15 R_BIN REFB REFA OSCO OSCI VDD Z axis divided by 4 C5 0.1u C4 4.7u + R4 15K 14 8 7 11 9 13 D1 Z axis divided by 2 C3 0.1u C2 4.7u + Y1 18MHz HLMP-ED80 S3 S2 S1 R2 100K Install Remove R5 R1 100K Install Remove R7 15 16 9 10 11 3 4 1 2 VSS PD NC CLK DATA VDD OSCRH U2 MDT80C06A1 Z1 Z2 R M L SCK SDIO K4 K5 12 8 6 14 13 5 7 R3 180K R7 10K C6 0.1u C1 0.1u + VCC C7 10u 1 2 3 4 5 6 HEADER 6 CN1 MDT80C06 PS2 optical 2D/3D, 3/5 key mouse controller 10. Application circuit 10.1 2D PS2 Optical mouse (ADNS2051) : This specification is subject to be changed without notice. Please visit our web site for the most updated information. 2003/9 V1.2 http://www.mdtic.com.tw C5 0.1u C4 4.7u + P.11 R4 15K YB YA XB XA SDIO SCK LED 4 5 3 2 16 1 6 Install R7 Remove Install R2 100K Sensor rotates 90 degree clockwise normal S3 S2 S1 Remove R5 R1 100K Sensor in position Remove R1 R6 10K Install Install Remove R5 10K Z axis divided by 4 Remove R6 Option Table GND U1 ADNS-2051 GND PD R_BIN REFB REFA OSCO OSCI VDD Install R2 12 10 15 14 8 7 11 9 13 Z axis divided by 2 400 DPI 800 DPI Mechanical Scrolling Wheel C3 0.1u C2 4.7u + Y1 18MHz D1 HLMP-ED80 15 16 9 10 11 3 4 1 2 VSS PD NC CLK DATA VDD OSCRH U2 MDT80C06A1 Z1 Z2 R M L SCK SDIO K4 K5 12 8 6 14 13 5 7 R3 180K R7 10K C6 0.1u C1 0.1u + VCC C7 10u 1 2 3 4 5 6 HEADER 6 CN1 MDT80C06 PS2 optical 2D/3D, 3/5 key mouse controller 10.2 3D/3Key PS2 Optical Mouse (ADNS2051) : This specification is subject to be changed without notice. Please visit our web site for the most updated information. 2003/9 V1.2 http://www.mdtic.com.tw C5 0.1u C4 4.7u + P.12 YB YA XB XA R8 10K Install Sensor rotates 90 degree clockwise R9 Remove normal Install Remove R7 S5 S4 S3 S2 S1 R2 100K Sensor in position Remove Install R1 R7 10K Install Remove 400 DPI R8 Remove 4 5 3 2 16 1 6 Z axis divided by 4 Install R2 SCK LED SDIO U1 ADNS-2051 GND GND PD R_BIN REFB REFA OSCO OSCI VDD Option Table 12 10 15 800 DPI R6 15K 14 8 7 11 9 13 Z axis divided by 2 Mechanical Scrolling Wheel C3 0.1u C2 4.7u + Y1 18MHz D1 HLMP-ED80 R1 100K R3 47K 15 16 9 10 11 3 4 1 2 R4 47K VSS PD NC CLK DATA VDD OSCRH U2 MDT80C06A1 Z1 Z2 R M L SCK SDIO K4 K5 12 8 6 14 13 5 7 R5 180K R9 10K C6 0.1u C1 0.1u + VCC C7 10u 1 2 3 4 5 6 HEADER 6 CN1 MDT80C06 PS2 optical 2D/3D, 3/5 key mouse controller 10.3 3D/5key PS2 Optical Mouse (ADNS2051) : This specification is subject to be changed without notice. Please visit our web site for the most updated information. 2003/9 V1.2 http://www.mdtic.com.tw C5 0.1u C4 4.7u + P.13 R10 R Install 4 5 3 R1 R7 10K R8 10K 2003/9 V1.2 Install Sensor rotates 90 degree clockwise Install R9 R2 100K Remove normal S5 S4 S3 Remove R7 S2 S1 R1 100K Sensor in position Remove Remove 400 DPI R8 Remove YB YA XB 2 16 1 6 Install Install R2 GND U1 ADNS-2051 GND PD R_BIN XA SDIO SCK LED Option Table 800 DPI Q2 12 10 15 14 REFB REFA OSCO OSCI VDD Z axis divided by 4 Q1 R6 15K 8 7 11 9 13 Z axis divided by 2 D2 LED C3 0.1u C2 4.7u + Y1 18MHz D1 HLMP-ED80 R3 47K R4 47K 15 16 9 10 11 3 4 1 2 PD NC CLK DATA VDD OSCRH Z1 Z2 VSS U2 MDT80C06A1 R M L SCK SDIO K4 K5 12 8 6 14 13 5 7 R5 180K R9 10K C6 0.1u C1 0.1u + VCC C7 10u HEADER 6 1 2 3 4 5 6 CN1 MDT80C06 PS2 optical 2D/3D, 3/5 key mouse controller 10.4 3D/5Key, Photo-coupler Zaxis, PS2 Optical Mouse (ADNS2051) : This specification is subject to be changed without notice. Please visit our web site for the most updated information. + C2 4.7u C3 0.1u http://www.mdtic.com.tw P.14 REFA SDIO SCK LED R6 R7 S3 S2 Install R6 10K Sensor rotates 90 degree clockwise Install Remove + S1 Remove normal Remove C6 2.2u 8 3 4 5 R5 100K Sensor in position Install R5 Option Table U1 ADNS-2610/2620 GND OSCO OSCI VDD Z axis divided by 4 6 2 1 7 Z axis divided by 2 Y1 24MHz R4 1K R1 100K D1 HLMP ED80 Q1 2N3906 R2 R 15 16 9 10 11 3 4 1 2 VSS PD NC CLK DATA VDD OSCRH U2 MDT80C06A1 Z1 Z2 R M L SCK SDIO K4 K5 12 8 6 14 13 5 7 R3 180K R7 10K C4 0.1u C1 0.1u + VCC C5 10u HEADER 6 1 2 3 4 5 6 CN1 MDT80C06 PS2 optical 2D/3D, 3/5 key mouse controller 10.5 2D PS2 Optical Mouse (ADNS2610/2620) : This specification is subject to be changed without notice. Please visit our web site for the most updated information. 2003/9 V1.2 + C2 4.7u http://www.mdtic.com.tw P.15 REFA SDIO SCK LED 2003/9 V1.2 R7 S3 S2 Install R6 10K Remove Install Remove R6 + S1 Sensor rotates 90 degree clockwise Remove normal C6 2.2u 8 3 4 5 R5 100K Sensor in position Z axis divided by 4 R5 Option Table U1 ADNS-2610/2620 GND OSCO OSCI VDD Install Mechanical Scrolling Wheel 6 2 1 7 Z axis divided by 2 C3 0.1u Y1 24MHz R4 1K R1 100K Q1 2N3906 ED80 D1 HLMP R2 R 15 16 9 10 11 3 4 1 2 PD NC CLK DATA VDD OSCRH Z1 Z2 VSS U2 MDT80C06A1 R M L SCK SDIO K4 K5 12 8 6 14 13 5 7 R3 180K R7 10K C4 0.1u C1 0.1u + VCC C5 10u HEADER 6 1 2 3 4 5 6 CN1 MDT80C06 PS2 optical 2D/3D, 3/5 key mouse controller 10.6 3D/3Key PS2 Optical Mouse (ADNS2610/ADNS2620) : This specification is subject to be changed without notice. Please visit our web site for the most updated information. + C2 4.7u C3 0.1u http://www.mdtic.com.tw P.16 REFA SDIO SCK LED C6 2.2u 8 3 4 5 2003/9 V1.2 Install R9 Sensor rotates 90 degree clockwise Install S5 S4 S3 S2 S1 Remove normal R8 Remove + R8 10K R7 100K Sensor in position Remove Z axis divided by 4 R7 Option Table U1 ADNS-2610/2620 GND OSCO OSCI VDD Install 6 2 1 7 Z axis divided by 2 Mechanical Scrolling Wheel Y1 24MHz R6 1K R1 100K Q1 2N3906 ED80 D1 HLMP R2 R R3 47K R4 47K 15 16 9 10 11 3 4 1 2 VSS PD NC CLK DATA VDD OSCRH U2 MDT80C06A1 Z1 Z2 R M L SCK SDIO K4 K5 12 8 6 14 13 5 7 R5 180K R9 10K C4 0.1u C1 0.1u + C5 10u VCC HEADER 6 1 2 3 4 5 6 CN1 MDT80C06 PS2 optical 2D/3D, 3/5 key mouse controller 10.7 3D/5key PS2 Optical Mouse (ADNS2610/2620) : This specification is subject to be changed without notice. Please visit our web site for the most updated information. + http://www.mdtic.com.tw P.17 R10 R D2 LED C2 4.7u C3 0.1u SDIO SCK LED C6 2.2u 8 3 4 5 R8 R9 Install S5 S4 S3 Sensor rotates 90 degree clockwise Install Remove S2 S1 Remove normal + R8 10K R7 100K Sensor in position Remove Z axis divided by 4 R7 Option Table GND REFA U1 ADNS-2610/2620 OSCO OSCI VDD Install Q2 6 2 1 7 Z axis divided by 2 Q1 Y1 24MHz R6 1K R1 100K Q1 2N3906 ED80 D1 HLMP R2 R R3 47K R4 47K 15 16 9 10 11 3 4 1 2 PD NC CLK DATA VDD OSCRH Z1 Z2 VSS U2 MDT80C06A1 R M L SCK SDIO K4 K5 12 8 6 14 13 5 7 R5 180K R9 10K C4 0.1u C1 0.1u + VCC C5 10u 1 2 3 4 5 6 HEADER 6 CN1 MDT80C06 PS2 optical 2D/3D, 3/5 key mouse controller 10.8 3D/5key, Photo-coupler Z-axis, PS2 Optical Mouse (ADNS2610/2620) : This specification is subject to be changed without notice. Please visit our web site for the most updated information. 2003/9 V1.2 C1 10u http://www.mdtic.com.tw C5 10p C4 10p IN GND 3.3V + 1 C3 0.1u 2 C9 0.1u Y1 18.432MHz OUT U1 AIC1722 P.18 + C10 0.1u C8 1u PD 11 12 13 14 15 16 17 18 19 20 Install Sensor rotates 90 degree clockwise R7 Remove normal Option Table VAY XA NC XB YA NC YB SCLK SDIO PAN101BOI VRT VRB VDDA VDDD VSSA VSSD OSCI OSCO LED VSS_LED U2 R2 100K Sensor in position 10 9 8 7 6 5 4 3 2 1 D1 LED R1 R R3 100K S3 S2 S1 15 16 9 10 11 3 4 1 2 VSS PD NC CLK DATA VDD OSCRH MDT80C06A1 Z1 Z2 R M L SCK SDIO K4 K5 U3 12 8 6 14 13 5 7 R4 180K R7 10K C7 0.1u C2 0.1u + VCC C6 10u HEADER 6 1 2 3 4 5 6 CN1 MDT80C06 PS2 optical 2D/3D, 3/5 key mouse controller 10.9 2D PS2 Optical Mouse (PANS101B) : 3 This specification is subject to be changed without notice. Please visit our web site for the most updated information. 2003/9 V1.2 C1 10u http://www.mdtic.com.tw C5 10p C4 10p IN GND 3.3V + 1 C9 0.1u P.19 + C10 0.1u C8 1u C3 0.1u 2 Y1 18.432MHz OUT U1 AIC1722 PD R7 10K Install Sensor rotates 90 degree clockwise Install R8 Remove normal R7 Mechanical Scrolling Wheel S3 S2 S1 Remove R3 100K Sensor in position Remove R2 Option Table 11 12 13 14 15 16 17 18 19 20 Install VAY XA NC XB YA NC YB SCLK SDIO PAN101BOI VRT VRB VDDA VDDD VSSA VSSD OSCI OSCO LED VSS_LED U2 Z axis divided by 4 10 9 8 7 6 5 4 3 2 1 R2 100K Z axis divided by 2 D1 LED R1 R 15 16 9 10 11 3 4 1 2 VSS PD NC CLK DATA VDD OSCRH MDT80C06A1 Z1 Z2 R M L SCK SDIO K4 K5 U3 12 8 6 14 13 5 7 R6 180K R8 10K C7 0.1u C2 0.1u + VCC C6 10u HEADER 6 1 2 3 4 5 6 CN1 MDT80C06 PS2 optical 2D/3D, 3/5 key mouse controller 10.10 3D/3key PS2 Optical Mouse (PANS101B) : 3 This specification is subject to be changed without notice. Please visit our web site for the most updated information. 2003/9 V1.2 C1 10u http://www.mdtic.com.tw C5 10p C4 10p IN GND 3.3V + 1 C3 0.1u 2 C9 0.1u Y1 18.432MHz OUT U1 AIC1722 P.20 + C10 0.1u C8 1u PD R7 10K Remove Install Sensor rotates 90 degree clockwise Install R8 Remove normal R4 47K Mechanical Scrolling Wheel R7 S5 S4 S3 S2 S1 R3 100K Sensor in position Remove R2 Option Table 11 12 13 14 15 16 17 18 19 20 Install VAY XA NC XB YA NC YB SCLK SDIO PAN101BOI VRT VRB VDDA VDDD VSSA VSSD OSCI OSCO LED VSS_LED U2 Z axis divided by 4 10 9 8 7 6 5 4 3 2 1 D1 LED R2 100K Z axis divided by 2 R1 R R5 47K 15 16 9 10 11 3 4 1 2 VSS PD NC CLK DATA VDD OSCRH MDT80C06A1 Z1 Z2 R M L SCK SDIO K4 K5 U3 12 8 6 14 13 5 7 R6 180K R8 10K C7 0.1u C2 0.1u + VCC C6 10u HEADER 6 1 2 3 4 5 6 CN1 MDT80C06 PS2 optical 2D/3D, 3/5 key mouse controller 10.11 3D/5key PS2 Optical Mouse (PAN101B) : 3 This specification is subject to be changed without notice. Please visit our web site for the most updated information. 2003/9 V1.2 C1 10u http://www.mdtic.com.tw C5 10p C4 10p IN GND 3.3V + 1 C3 0.1u 2 C9 0.1u Y1 18.432MHz OUT U1 AIC1722 P.21 + C10 0.1u C8 1u 2003/9 V1.2 PD R9 R D2 LED 11 12 13 14 15 16 17 18 19 20 Install R8 Remove Install Q2 R4 47K Sensor rotates 90 degree clockwise Remove R7 Remove Q1 S5 S4 S3 S2 S1 R3 100K Sensor in position normal R2 100K R7 10K Z axis divided by 4 R2 Option Table VAY XA NC XB YA NC YB SCLK SDIO PAN101BOI VRT VRB VDDA VDDD VSSA VSSD OSCI OSCO LED VSS_LED U2 Install 10 9 8 7 6 5 4 3 2 1 Z axis divided by 2 D1 LED R1 R R5 47K 15 16 9 10 11 3 4 1 2 VSS PD NC CLK DATA VDD OSCRH MDT80C06A1 Z1 Z2 R M L SCK SDIO K4 K5 U3 12 8 6 14 13 5 7 R6 180K R8 10K C7 0.1u C2 0.1u + VCC C6 10u HEADER 6 1 2 3 4 5 6 CN1 MDT80C06 PS2 optical 2D/3D, 3/5 key mouse controller 10.12 3D/5Key, Photo-coupler Z-axis, PS2 Optical Mouse (PAN101B) : 3 This specification is subject to be changed without notice. Please visit our web site for the most updated information.