eKM8025 USB & PS/2 Mouse Controller 1. General Description The eKM8025 is an Mouse Controller designed to control both USB & PS/2 Mouse device with XY Quadrature. This Mouse Controller can auto detect USB or PS/2 mode, and supports X,Y,Z three axes , and L, R, M, P, N five buttons under both USB and PS2 mode. 2. Features ◆Universal Serial Bus Specification, version 1.1 ◆USB HID Specification, version 1.11 ◆Auto-detecting PS/2 port or USB port. ◆Compatible with Microsoft 3D PS/2 mouse. ◆Support 3D (X,Y,Z) 5 Key (L,R,M,P,N) input. ◆Support Z/2 Z-axis input type. ◆ Support Agilent HDNS2000、ADNS2051、OM01、OM02、PixArt PAN101BOI/BSI Optical Mouse Sensor. ◆ 800DPI simulation by firmware(For eKM8025BBP/ eKM8025BCP/ eKM8025BBM/ eKM8025BCM only). ◆Applications： ◇3D, 3 Buttons USB and PS/2 Combo Mouse. ◇3D, 5 Buttons USB and PS/2 Combo Mouse. 1 This specification are subject to be changed without notice Revision1.00(2400/2500) 2006/7/11 eKM8025 USB & PS/2 Mouse Controller ◆ Package： 【400dpi】 ◇18 Pin PDIP (300MIL) eKM8025ABP 3D 3K ◇18 Pin SOP (300MIL) eKM8025ABM 3D 3K ◇20 Pin PDIP (300MIL) eKM8025ACP 3D 5K ◇20 Pin SOP (300MIL) eKM8025ACM 3D 5K 【800 dpi simulation by firmware】 ◇18 Pin PDIP (300MIL) eKM8025BBP 3D 3K ◇18 Pin SOP (300MIL) eKM8025BBM 3D 3K ◇20 Pin PDIP (300MIL) eKM8025BCP 3D 5K ◇20 Pin SOP (300MIL) eKM8025BCM 3D 5K 2 This specification are subject to be changed without notice Revision1.00(2400/2500) 2006/7/11 eKM8025 USB & PS/2 Mouse Controller 3. Pin assignment ◆eKM8025AB /eKM8025BB (18-Pin) for 3D3Key □□□□□□□□ 4 3 2 1 18171615 M KEY□ 1z L KEY□ 2 Z1□ 3 Z2□ 4 R KEY□ 5 NA□ 6 VSS□ 7 V3.3□ 8 OSCI□ 9 □X1 17 □X2 16 □Y1 15 □Y2 14 □IR_C 13 □D+ / CLK 12 □D- / DATA 11 □VDD 10 □OSCO 18 (0,0) + □ 5 14 □ □ 6 X □ □ 7 eKM8025AB/eKM8025BB (18-Pin) 3 8 □ 9 101112 13 □ □□□□ Bounding PAD Symbol I/O PIN Function M I 1 Middle Key Input L I 2 Left Key Input Z1 I 3 Z axis Input 1 Z2 I 4 Z axis Input 2 R I/O 5 Right Key Input K_OP I 6 This pin should be connected to V3.3(pin8) VSS - 7 GND V3.3V O 8 3.3V DC voltage output from internal regulator. This pin has to be tied to a 4.7μF capacitor. OSCI I 9 6MHz ceramic resonator input. OSCO I/O 10 Return path for 6-MHz ceramic resonator. VDD - 11 5 V Power Input D- / DATA I/O 12 USB D- or PS/2 Data I/O D+ / CLK I/O 13 USB D+ or PS/2 CLK I/O IR_C O 14 IR(Sensor power) Control Pin. 1 Y2 I 15 Y axis Input 2 Y1 I 16 Y axis Input 1 X2 I 17 X axis Input 2 X1 I 18 X axis Input 1 This specification are subject to be changed without notice Revision1.00(2400/2500) 2006/7/11 eKM8025 USB & PS/2 Mouse Controller ◆eKM8025AC/eKM8025BC (20-Pin) for 3D5Key □□□□□□□□ 4 3 2 1 20191817 M KEY□ 1z L KEY□ 2 Z1□ 3 Z2□ 4 R KEY□ 5 P KEY/K_OP□ 6 VSS□ 7 VSS□ 8 V3.3□ 9 OSCI□ 10 □X1 19 □X2 18 □Y1 17 □Y2 16 □IR_C 15 □N KEY 14 □D+ / CLK 13 □D- / DATA 12 □VDD 11 □OSCO 20 (0,0) + □5 16 □ □6 15 □ □8 eKM8025AC/eKM8025BC (20-Pin) 4 9 □ 10111213 14 □ □□□□ Bounding PAD Symbol I/O PIN Function M I 1 Middle Key Input L I 2 Left Key Input Z1 I 3 Z axis Input 1 Z2 I 4 Z axis Input 2 R I/O 5 Right Key Input K_OP I 6 This pin should be connected to GND with 1MΩ resistance. P I 6 Pre Key Input VSS - 7,8 V3.3V O 9 3.3V DC voltage output from internal regulator. This pin has to be tied to a 4.7μF capacitor. OSCI I 10 6MHz ceramic resonator input. OSCO I/O 11 Return path for 6-MHz ceramic resonator. VDD - 12 5 V Power Input D- / DATA I/O 13 USB D- or PS/2 Data I/O D+ / CLK I/O 14 USB D+ or PS/2 CLK I/O N I 15 Next Key Input IR_C O 16 IR(Sensor power) Control Pin. 1 Y2 I 17 Y axis Input 2 Y1 I 18 Y axis Input 1 X2 I 19 X axis Input 2 X1 I 20 X axis Input 1 GND This specification are subject to be changed without notice Revision1.00(2400/2500) 2006/7/11 eKM8025 USB & PS/2 Mouse Controller 4. Function description X1 X2 Y1 Y2 X-COUNTER X Y USB PROTOCOL CONTROLLER Y-COUNTER DATA PROCESS Z1 Z2 Z PS/2 PROTOCOL CONTROLLER Z-COUNTER BTM REGISTER IR_C MULTIPLEXER DATA I/O IR_C D+/CLK D-/DATA LMRPN MODE SELECTOR DETECT CIRCUIT L MR P N Fig-1 : Function block ◆Quadrature Signal Timing Diagram ◇X、Y、Z Axis Counting XY AXIS COUNTING X1(Y1) X2(Y2) +1 +1 +1 +1 -1 -1 -1 -1 Z/2 COUNTING Z1 Z2 +1 5 +1 -1 This specification are subject to be changed without notice Revision1.00(2400/2500) -1 2006/7/11 eKM8025 USB & PS/2 Mouse Controller ◇Quadrature Output Crossed Width Limit X1(Y1) X2(Y2) T T T T T T T T Note：For X(Y) Axis ,T > 40us For Z Axis ,T > 1ms ◆PS/2 function description ◇PS/2 Mouse Commands Description Hex Code Command eKM8023 echo code FF Reset FA,AA,00 FE Resend XX,(XX,XX) F6 Set Default FA F5 Disable FA F4 Enable FA F3,XX Set Sampling Rate FA,FA F2 Read Device Type FA,00 F0 Set Remote Mode FA EE Set Wrap Mode FA EC Reset Wrap Mode FA EB Read Data FA,XX,XX,XX EA Set Stream Mode FA E9 Status Request FA,XX,XX,XX E8 Set Resolution FA,FA E7 Set Autospeed FA E6 Reset Autospeed FA ◇Microsoft PS/2 scrolling mouse (A) Entering procedure: Except in WRAP mode, while eKM8023 received the following consecutive command. i. F3 C8 ---- set sampling rate 200/sec ii. F3 64 ---- set sampling rate 100/sec iii. F3 50 ---- set sampling rate 80/sec (B) Entering procedure: after eKM8023 enter scrolling mouse mode (Mouse ID = 03), while eKM8023 received the following consecutive command.eKM8023 will enter 5 buttons mode Mouse ID:04) 6 i F3 C8 ------- set sampling rate 200/sec ii F3 C8 ---- set sampling rate 200/sec iii F3 50 ---- set sampling rate 80/sec This specification are subject to be changed without notice Revision1.00(2400/2500) 2006/7/11 eKM8025 USB & PS/2 Mouse Controller (C) Operating in PS/2 scrolling mode: a. All of the commands in legacy mode still be valid. b. The ID code of read device type command (F2) will changed from "00" to be "03". c. Data report will be four bytes format: 【3D3Buttons Data Format】 Byte 1 2 3 4 Bit 0 1 2 3 4 5 6 7 0-7 0-7 0-7 Description Left button status; 1 = pressed Right buttson status; 1 = pressed Middle button status; 1 = pressed Reserve to 1 X data sign; 1 = negative Y data sign; 1 = negative X data overflow; 1 = overflow Y data overflow; 1 = overflow X data (D0-D7) Y data (D0-D7) Z data (D0-D7) (D) Operating in 3D5K mode: a. All of the commands in legacy mode still be valid. b. The ID code of read device type command (F2) will changed from "03" to be "04". c. Data report will be four bytes format: 【3D5Buttons Data Format】 Byte 1 2 3 4 4 4 4 Bit 0 1 2 3 4 5 6 7 0-7 0-7 0-3 4 5 6,7 Description Left button status; 1 = pressed Right button status; 1 = pressed Middle button status; 1 = pressed Reserve to 1 X data sign; 1 = negative Y data sign; 1 = negative X data overflow; 1 = overflow Y data overflow; 1 = overflow X data (D0-D7) Y data (D0-D7) Z data (D0-D3) P KEY status; 1 = pressed N KEY status; 1 = pressed Reserve to 0 (E) Exiting Microsoft scrolling mode & 3D5K mode: There are two ways to exit: a. Power off. b. Reset command (FF). ◇Z-axis Input Function The Z0-Z7 limit value is ±7 Z-axis counter accumulates the Z1, Z2 phase changed by movement. This mode includes noise immunity. Z/2 : 2 dot per count. The wheel should stay at Z1=0, Z2=0 or Z1=1, Z2=1 Phase 7 This specification are subject to be changed without notice Revision1.00(2400/2500) 2006/7/11 eKM8025 USB & PS/2 Mouse Controller ◆USB function Description 【Descriptor in USB Mode】 Descriptor Type Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Byte8 Device Descriptor Configuration Descriptor 12 01 10 01 00 VID1 VID0 PID1 00 01 09 02 22 00 01 04 00 00 21 11 00 00 08 00 02 01 00 A0 01 03 01 02 01 00 01 22 34 PID0 REV1 REV0 32 09 Interface Descriptor 00 09 HID Descriptor 00 Endpoint 07 05 81 03 04 00 0A HID Report Descriptor 05 A1 15 81 05 15 81 01 00 00 02 01 80 06 09 05 25 95 09 25 C0 02 09 01 01 30 7F C0 A1 19 95 75 09 75 01 01 KEY1 KEY2 31 08 09 29 75 81 09 95 01 KEY1 01 03 38 03 *VID：Vendor ID (Default = 0x04F3). *PID：Product ID (3D3K MOUSE = 0x0211 ,3D5K MOUSE = 0x0212). *REV：Revision Number = 0x2400(eKM8025A)/0x2500(eKM8025B) *KEY1：3D3K MOUSE = 3, 3D5K MOUSE = 5 . *KEY2：3D3K MOUSE = 5, 3D5K MOUSE = 3 . *Product String：”PS/2+USB Mouse” 【USB Mouse Report Data Type】 Byte0 Byte1 Byte2 Byte3 Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0 0 0 0 N P M R L Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0 Bit2 Bit1 Bit0 Bit2 Bit1 Bit0 X-AXIS Bit7 Bit6 Bit5 Bit4 Bit3 Y-AXIS Bit7 Bit6 Bit5 Bit4 Bit3 Z-AXIS *3D3K MODE , P = N = 0. 8 This specification are subject to be changed without notice Revision1.00(2400/2500) 2006/7/11 eKM8025 USB & PS/2 Mouse Controller 5. Absolute Maximum Rating Symbol Temperature under bias Storage temperature Input voltage Output voltage min 0 -65 -0.5 -0.5 Max 70 150 6.0 6.0 unit ºC ºC V V 6. Electrical Characteristic (T = 0ºC ~70ºC, VDD=4.4~5.2V, VSS=0V) Symbol Parameter Condition Min Type Max Unit 3.0 3.3 3.6 V - 2.3 V 3.3V Regulator VRag Output voltage of 3.3v Regulator VDD = 4.2V ~ 5.2V VResetL Low Power Reset detecting low Voltage VResetH Low Power Reset detecting high Voltage 2.4 - V - - 1 μA MCU operating Input Leakage Current for input pins VIN=VDD,VSS VIHX Clock Input High Voltage OSCI 2.5 - - V VILX Clock Input Low Voltage OSCI - - 1.0 V 1.1 - V IIL GPIO Pins VHL High/Low level transfer point Input VOH Output High Voltage IDrive = 5.0mA 2.4 - - V VOL Output Low Voltage ISink = 5.0mA - - 0.4 V IPH Input current with pull-high resister - 25 - μA IPL Input current with pull-low resister - 330 - μA 2.8 - 3.6 V - - 0.3 V 0.2 - - V The input pin with internal pull-high resistor of Port6 or port7 is connected to VSS. The input pin with internal pull-low resistor of Port6 is connected to VDD. USB Interface 9 VOH Static Output High VOL Static Output Low VDI Differential Input Sensitivity VCM Differential Input Command Mode Range 0.8 - 2.5 V VSE Single Ended Receiver Threshold 0.8 - 2.0 V CIN Transceiver Capacitance - - 20 pF VRG Output Voltage of Internal Regulator 3.0 - 3.6 V RPH Internal Pull-high Resistor -20% 1.5 +20% kΩ USB operation Mode USB operation Mode This specification are subject to be changed without notice Revision1.00(2400/2500) 2006/7/11 eKM8025 USB & PS/2 Mouse Controller 7. Package Diagram ◆PDIP-18L 300MIL PACKAGE OUTLINE DIMENSION(Unit:mm) ◆PDIP-20L 300MIL PACKAGE OUTLINE DIMENSION(Unit:mm) 10 This specification are subject to be changed without notice Revision1.00(2400/2500) 2006/7/11 eKM8025 USB & PS/2 Mouse Controller ◆SOP-18L 300MIL PACKAGE OUTLINE DIMENSION(Unit:mm) ◆SOP-20L 300MIL PACKAGE OUTLINE DIMENSION(Unit:mm) 11 This specification are subject to be changed without notice Revision1.00(2400/2500) 2006/7/11 eKM8025 USB & PS/2 Mouse Controller 8. Pad List Information ◆eKM8025AB/eKM8025BB Pad Configuration □□□□□□□□ 4 3 2 1 18171615 (0,0) + □5 □6 □7 8 □ 14 □ X□ 9 101112 13 □ □□□□ ◆eKM8025AB/eKM8025BB Pad Name & Coordinate Table Pad Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 12 Chip Size：1520*2580 UM Pad Name M_KEY L_KEY Z1 Z2 R_KEY K_OP VSS V3.3 OSCI OSCO VDD D_MNS D_PLUS NC IR_C Y2 Y1 X2 X1 Pad Coordinate (X, Y) 196.5, 1176.7 91.5, 1176.7 -13.5, 1176.7 -118.5, 1176.7 -652.7, -785 -652.7, -890 -652.7, -997.5 -304.45, -1182.6 44.3, -1182.6 149.3, -1182.6 256.9, -1182.6 364.4, -1182.6 647.3, -1015.8 647.3, -901.6 647.3, -796.6 616.5, 1176.7 511.5, 1176.7 406.5, 1176.7 301.5, 1176.7 This specification are subject to be changed without notice Revision1.00(2400/2500) 2006/7/11 eKM8025 USB & PS/2 Mouse Controller ◆eKM8025AC/eKM8025BC Pad Configuration □□□□□□□□ 4 3 2 1 20191817□ (0,0) + □5 □6 □8 9 □ 16 □ 15 □ 10111213 14 □ □□□□ ◆eKM8025AC/eKM8025BC Pad Name & Coordinate Table Pad Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 13 Chip Size：1520*2580 UM Pad Name M_KEY L_KEY Z1 Z2 R_KEY P_KEY/K_OP Pad Coordinate (X, Y) 196.5, 1176.7 91.5, 1176.7 -13.5, 1176.7 -118.5, 1176.7 -652.7, -785 -652.7, -890 VSS V3.3 OSCI OSCO VDD D_MNS D_PLUS N_KEY IR_C Y2 Y1 X2 X1 -652.7, -997.5 -304.45, -1182.6 44.3, -1182.6 149.3, -1182.6 256.9, -1182.6 364.4, -1182.6 647.3, -1015.8 647.3, -901.6 647.3, -796.6 616.5, 1176.7 511.5, 1176.7 406.5, 1176.7 301.5, 1176.7 This specification are subject to be changed without notice Revision1.00(2400/2500) 2006/7/11 eKM8025 USB & PS/2 Mouse Controller 9. Application circuit ※NOTICE DIAGRAM R_LED OM02_7 OMA100 1 2 3 4 5 Q2 eKM8025AB/eKM8025BB 1 2 V3.3 1 2 3 1 2 4 M X1 L X2 Z1 Y1 Z2 Y2 6 3904 7 18 + 4.7uF 17 0.1uF 6 V3.3 7 8 + C9 9 4.7uF R IR_C K_OP D+/CLK VSS D-/DATA V3.3 VDD OSCI OSCO TIO X2 PD X1 R_BIN Y1 VDD Y2 GND XY _LED ROSCA REFA GND REFB ROSCB 16 15 14 13 C8 12 C7 + 11 Rosc Cosc 10 9 16 15 Z-AXIS 5 8 TCLK 14 R4 13 R3 12 R2 11 R1 Q1 3904 VDD 10 C6 + C5 C4 + C3 C2 + D+ / CLK C1 D- / DATA VSS 20P 6M SHLD 20P PORT ◆COMPONENTS IN DETAIL TYPE NORMAL APPLICATION EFT BETTER IMPROVEMENT TYPE NORMAL APPLICATION EFT BETTER IMPROVEMENT R1 R2 R3 － － 33Ω 33Ω C5 C6 C7 C8 C9 10uF 0.1uF(104) 100uF 0.1uF(104) 4.7uF 10Ω C4 R4 C1 C2 C3 － 1.5KΩ 10uF 0.1uF(104) 0.1uF(104) － Cosc － 10uF 1nF(102) ＊＊ C5 & C6 have to be closed to MCU(VDD) ＊＊ C7 & C8 have to be closed to Sensor(VDD). ＊＊ C9 has to be closed to MCU(V3.3) ＊＊ It’s NOT recommended to use eKM8025B(800DPI) for Ball Type. 14 This specification are subject to be changed without notice Revision1.00(2400/2500) 2006/7/11 eKM8025 USB & PS/2 Mouse Controller ◆eKM8025AB _Mechanical Z/2 3D3Key Application For Ball Type 6 1 5 2 eKM8025AB 4 1 2 M X1 L X2 Z1 Y1 Z2 Y2 18 6 1 17 5 1 2 3 1 2 4 2 16 4 15 200 Z-AXIS 5 R 6 IR_C K_OP 7 8 D+/CLK VSS D-/DATA V3.3 VDD OSCI OSCO + 9 4.7uF 14 13 12 10Ω 11 0.1uF 10 C4 + C2 0.1uF 10uF + VDD C1 10uF D+ / CLK D- / DATA C3 VSS 20P 6M 1、C9 HAS TO be clos ed to V3.3(MCU) 20P SHLD 2、C3 & C4 HAVE TO be clos ed to VDD(MCU) PORT ◆eKM8025AB//eKM8025BB _Mechanical Z/2 3D3Key Application For OM02 33Ω OM02_5 OMA100 1 2 1、C9 HAS TO be clos ed to V3.3(MCU) 2、C3 & C4 HAVE TO be clos ed to VDD(MCU) 3 3、C5 & C6 HAVE TO be clos ed to VDD(SENSOR) 4 TCLK TIO X2 PD X1 R_BIN Y1 VDD Y2 GND 16 15 14 13 0.1uF 5 Q2 eKM8025AB/eKM8025BB 1 2 1 2 3 1 2 4 M X1 L X2 Z1 Y1 Z2 Y2 7 18 + 4.7uF 17 6 7 8 + C9 9 4.7uF R IR_C K_OP D+/CLK VSS D-/DATA V3.3 VDD OSCI OSCO 0.1uF 8 XY _LED ROSCA REFA GND REFB ROSCB +100uF C6 C5 11 Rosc Cosc 10 9 16 15 Z-AXIS 5 6 3904 12 Q1 1.5K 14 3904 13 12 10Ω 11 0.1uF 10 C4 + C3 10uF C2 0.1uF + C1 10uF VDD D+ / CLK D- / DATA VSS 20P 6M 20P SHLD PORT 15 This specification are subject to be changed without notice Revision1.00(2400/2500) 2006/7/11 eKM8025 USB & PS/2 Mouse Controller ◆eKM8025AC _ Mechanical 3D5Key Application For Ball Type 6 1 5 2 eKM8025AC 4 1 2 M 20 X1 L X2 Z1 Y1 Z2 Y2 6 1 19 5 1 2 3 1 2 4 2 18 4 17 200 Z-AXIS 5 6 7 8 9 1M Ω + C9 10 4.7uF R 16 IR_C P/K_OP 15 N VSS D+/CLK VSS D-/DATA V3.3 VDD OSCI OSCO 14 13 12 0.1uF 11 C4 10Ω + C2 0.1uF 10uF + VDD C1 10uF D+ / CLK D- / DATA C3 VSS 20P 6M 1、C9 HAS TO be clos ed to V3.3(MCU) 20P SHLD 2、C3 & C4 HAVE TO be clos ed to VDD(MCU) PORT ◆eKM8025AC/eKM8025BC _ Mechanical 3D5Key Application For OM02 33Ω OM02_9 OMA100 1 2 1、C9 HAS TO be clos ed to V3.3(MCU) 2、C3 & C4 HAVE TO be clos ed to VDD(MCU) 3 3、C5 & C6 HAVE TO be clos ed to VDD(SENSOR) 4 TCLK TIO X2 PD X1 R_BIN Y1 VDD Y2 GND 16 15 14 13 0.1uF 5 Q2 eKM8025AC/eKM8025BC 1 2 1 2 3 1 2 4 M X1 L X2 Z1 Y1 Z2 Y2 7 20 + 4.7uF 19 6 7 8 9 1M Ω R IR_C P/K_OP N VSS D+/CLK VSS D-/DATA V3.3 VDD OSCI OSCO + 10 4.7uF 0.1uF 8 XY _LED ROSCA REFA GND REFB ROSCB C5 11 Rosc Cosc 10 9 18 17 Z-AXIS 5 6 3904 +100uF C6 12 Q1 1.5K 16 3904 15 14 13 12 0.1uF 11 C4 10Ω + C3 10uF C2 0.1uF + C1 10uF VDD D+ / CLK D- / DATA VSS 20P 6M 20P SHLD PORT 16 This specification are subject to be changed without notice Revision1.00(2400/2500) 2006/7/11 eKM8025 USB & PS/2 Mouse Controller ELAN (HEADQUARTER) MICROELECTRONICS CORP., LTD. Address : No. 12, Innovation 1st. Rd. Science-Based Industrial Park, Hsinchu City, Taiwan. Telephone: 886-3-5639977 Facsimile : 886-3-5639966 ELAN (H.K.) MICROELECTRONICS CORP., LTD. Address : Rm. 1005B, 10/F, Empire Centre, 68 Mody Road, Tsimshatsui, Kowloon, Hong Kong. Telephone: 852-27233376 Facsimile : 852-27237780 E-mail : [email protected] ELAN MICROELECTRONICS SHENZHEN, LTD. Address : SSMEC Bldg. 3F , Gaoxin S. Ave. 1st , South Area , Shenzhen High-tech Industrial Park., Shenzhen Telephone: 86-755-26010565 Facsimile : 86-755-26010500 ELAN MICROELECTRONICS SHANGHAI, LTD. Address : #23 Building No.115 Lane 572 BiBo Road. Zhangjiang, Hi-tech Park, Shanghai Telephone: 86-21-50803866 Facsimile : 86-21-50804600 Elan Information Technology Group. Address: 1821 Saratoga Avenue, suite 250, Saratoga, CA 95070, USA Telephone: 1-408-366-8225 Facsimile : 1-408-366-8220 Elan Microelectronics Corp. (Europe) Address: Dubendorfstrasse 4, 8051 Zurich, Switzerland Telephone: 41-43-2994060 Facsimile : 41-43-2994079 Email : [email protected] Web-Site : www.elan-europe.com Copyright © 2004 ELAN Microelectronics Corp. All rights reserved. ELAN owns the intellectual property rights, concepts, ideas, inventions, know-how (whether patentable or not) related to the Information and Technology (herein after referred as " Information and Technology") mentioned above, and all its related industrial property rights throughout the world, as now may exist or to be created in thefuture. ELAN represents no warranty for the use of the specifications described, either expressed or implied, including, but not limited, to the implied warranties of merchantability and fitness for particular purposes. The entire risk as to the quality and performance of the application is with the user. In no even shall ELAN be liable for any loss or damage to revenues, profits or goodwill or other special, incidental, indirect and consequential damages of any kind, resulting from the performance or failure to perform, including without limitation any interruption of business, whatever resulting from breach of contract or breach of warranty, even if ELAN has been advised of the possibility of such damages. The specifications of the Product and its applied technology will be updated or changed time by time. All the information and explanations of the Products in this website is only for your reference. The actual specifications and applied technology will be based on each confirmed order. ELAN reserves the right to modify the information without prior notification. The most up-to-day information is available on the website http://www.emc.com.tw. 17 This specification are subject to be changed without notice Revision1.00(2400/2500) 2006/7/11