IPT1606-xxA IP Semiconductor Co., Ltd. High current density due to double mesa technology; SIPOS and Glass Passivation. IPT1606-xx series are suitable for general purpose AC Switching. They can be used as an ON/OFF function In application such as static relays, heating regulation, Induction motor stating circuits… or for phase Control operation light dimmers, motor speed Controllers. IPT1606-xx series is 3 Quadrants triacs, This is specially recommended for use on inductive Loads.. The IPT1606-xxA (Insulated version) series are isolated internally they provides a 2500V RMS isolation voltage from all three terminals to external heatsink . TO-220A MAIN FEATURES Symbol Value Unit IT(RMS) 16 A VDRM / VRRM 600 V VTM ≤ 1.55 V ABSOLUTE MAXIMUM RATINGS Parameter Storage Junction Temperature Range Operating Junction Temperature Range Symbol Value Unit Tstg Tj -40 to +150 -40 to +125 ℃ Repetitive Peak Off-state Voltage Repetitive Peak Reverse Voltage Tj = 25℃ VDRM VRRM 600 600 V Non Repetitive Peak Off-state Voltage Non Repetitive Peak Reverse Voltage Tj = 25℃ VDSM VRSM 700 700 V RMS on–state current (Full sine wave) Tc = 85℃ IT(RMS) 16 A ITSM 168 160 A I²t 144 A²s dI / dt 50 A/us IGM 4 A PG(AV) 1 W Non repetitive surge peak on–state Current (full cycle, Tj = 25℃) I²t Value for fusing f = 60Hz t = 16.7ms f = 50 Hz t = 20ms tp = 10ms Critical Rate of rise of on-state current IG = 2xIGT, tr ≤ 100ns, f = 120Hz, Tj = 125 ℃ Peak gate current tp = 20us, Tj = 125 ℃ Average gate power dissipation Tj = 125 ℃ 4F, Cheong won B/D, 269 Hyoje-dong, Jongno-gu, Seoul, 110-480 Korea TEL : +82-70 - 7574 - 2839, Fax : +82-2-6280-6382, [email protected] 1 IPT1606-xxA ELECTRICAL CHARACTERISTICS (Tj = 25 ℃ unless otherwise specified) Symbol Test Condition IGT VD = 12V RL = 30Ω VGT VGD IPT1606-xxA Quadrant VD=VDRM, RL=3.3KΩ, Tj = 125 ℃ dV/dt 10 35 50 I – II – III MAX 1.3 V I – II – III MIN 0.2 V IG = 1.2 IGT 25 50 70 30 60 80 MAX mA mA IT = 100mA MAX 15 35 50 mA VD = 67% VDRM gate open Tj = 125 ℃ MIN 40 500 1000 V/us 8.5 - - 3.0 - - 8.5 14 (dV/dt) c=0.1V/us Tj = 125 ℃ (dI/dt)c BE MAX II IH CE I – II – III I – III IL Unit SE (dV/dt) c=10V/us Tj = 125 ℃ MIN Without snubber Tj = 125 ℃ A/ms STATIC CHARACTERISTICS Symbol Test Conditions Value (MAX) Unit VTM ITM = 17A, t p = 380uS Tj = 25 ℃ 1.55 V IDRM VD = VDRM Tj = 25 ℃ 5 uA IRRM VR = VRRM Tj = 125 ℃ 2 mA THERMAL RESISTANCES Symbol Parameter Value Unit Rth (j – c) Junction to case (AC) 2.1 ℃/W 4F, Cheong won B/D, 269 Hyoje-dong, Jongno-gu, Seoul, 110-480 Korea TEL : +82-70 - 7574 - 2839, Fax : +82-2-6280-6382, [email protected] 2 IPT1606-xxA PACKAGE MECHANICAL DATA TO-220A Millimeters Min Typ Max A 4.4 4.6 B 0.61 0.88 C 0.46 0.70 C2 1.23 1.32 C3 2.4 2.72 D 8.6 9.7 E 9.8 10.4 F 6.2 6.6 G 4.8 5.4 H 28 29.8 L1 3.75 L2 1.14 1.7 L3 2.65 2.95 V 40º 4F, Cheong won B/D, 269 Hyoje-dong, Jongno-gu, Seoul, 110-480 Korea TEL : +82-70-7574-2839, Fax : +82-2-6280-6382, [email protected] 3 IPT1606-xxA IPT1606-xxA 4F, Cheong won B/D, 269 Hyoje-dong, Jongno-gu, Seoul, 110-480 Korea TEL : +82-70 - 7574 - 2839, Fax : +82-2-6280-6382, [email protected] 4