5x5mm SQUARE TOP LED LAMP Part Number: WP503IDT High Efficiency Red Features Description zLOW POWER CONSUMPTION. The High Efficiency Red source color devices are made with zULTRA BRIGHTNESS IS AVAILABLE. Gallium Arsenide Phosphide on Gallium Phosphide Orange zWIDE VIEWING ANGLE. Light Emitting Diode. zRELIABLE AND RUGGED. zEXCELLENT UNIFORMITY OF LIGHT OUTPUT. zIDEAL AS FLUSH MOUNTED PANEL INDICATORS. zLONG LIFE - SOLID STATE RELIABILITY. zRoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAF2629 REV NO: V.2 DATE: MAY/22/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 1 OF 6 ERP: 1101009432 Selection Guide Part No. Dice WP503IDT Lens Type High Efficiency Red (GaAsP/GaP) RED DIFFUSED Iv (mcd) [2] @ 10mA Viewing Angle [1] Min. Typ. 2θ1/2 3 6 110° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength High Efficiency Red λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 627 nm IF=20mA High Efficiency Red 625 nm IF=20mA Spectral Line Half-width High Efficiency Red 45 nm IF=20mA C Capacitance High Efficiency Red 15 pF VF=0V;f=1MHz VF [2] Forward Voltage High Efficiency Red 2 2.5 V IF=20mA IR Reverse Current High Efficiency Red 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter High Efficiency Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 160 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAF2629 REV NO: V.2 DATE: MAY/22/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 2 OF 6 ERP: 1101009432 High Efficiency Red WP503IDT SPEC NO: DSAF2629 REV NO: V.2 DATE: MAY/22/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 3 OF 6 ERP: 1101009432 PACKING & LABEL SPECIFICATIONS WP503IDT SPEC NO: DSAF2629 REV NO: V.2 DATE: MAY/22/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 4 OF 6 ERP: 1101009432 SPEC NO: DSAF2629 REV NO: V.2 DATE: MAY/22/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 5 OF 6 ERP: 1101009432 SPEC NO: DSAF2629 REV NO: V.2 DATE: MAY/22/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 6 OF 6 ERP: 1101009432