SDB2060PI Schottky Barrier Rectifier DUAL COMMON CATHODE SCHOTTKY RECTIFIER Features Low forward voltage drop Low power loss and High efficiency Low leakage current 1 High surge capacity 3 Pin 1, 3 : Anode Pin 2 : Cathode 123 Full lead (Pb)-free and RoHS compliant device 2 TO-220F-3L Applications High efficiency SMPS Product Characteristics Output rectification High frequency switching IF(AV) 10 X 10A Freewheeling VRRM 60V VFM at 125℃ 0.55V IFSM 150A DC-DC converter systems Description The SDB2060PI is suited for Switch Mode Power Supply and high frequency DC to DC converters. This device is especially intended for use in low voltage, high frequency inverters, free wheeling and polarity protection applications. Ordering Information Device Marking Code Package Packaging SDB2060PI SDB2060 TO-220F-3L Tube Marking Information AUK = Manufacture Logo ∆ = Control Code of Manufacture YMDD = Date Code Marking -. Y = Year Code -. M = Monthly Code -. D = Daily Code SDB2060 = Specific Device Code KSD-D0O006-002 1 SDB2060PI Absolute Maximum Ratings (Limiting Values) Characteristic Symbol Value Unit VRRM VRWM VR 60 V Maximum repetitive reverse voltage Maximum working peak reverse voltage Maximum DC blocking voltage per diode 10 Maximum average forward rectified current IF(AV) total device A 20 Peak forward surge current 8.3ms single half sine-wave superimposed on rated load per diode IFSM 150 A Storage temperature range Tstg -55℃ to +150℃ ℃ Tj 150 ℃ Symbol Value Unit Maximum operating junction temperature Thermal Characteristics Characteristic 4.0 per diode Maximum thermal resistance junction to case total device Rth(j-c) ℃/W 3.6 Electrical Characteristics Characteristic Symbol VFM (1) Peak forward voltage drop IRM (1) Reverse leakage current Junction capacitance Cj Test Condition Min. Typ. Max. Unit Tj=25℃ - 0.55 0.65 V Tj=125℃ - 0.50 0.55 V Tj=25℃ - - 1.5 mA Tj=125℃ - - 200 mA - 400 - pF IFM = 10A VR = VRRM VR = 4VDC, f=1MHz Note : (1) Pulse test : tP≤380 ㎲, Duty cycle≤2% To evaluate the conduction losses use the following equation: PF = 0.35 IF(AV) + 0.019 IF2(RMS) IFM Forward Voltage : VFM = Vto + rd IFM 2 IF(AV) rd Conduction Loss : PF = Vto IF(AV) + rd IF2(RMS) IF(AV) Vto VFM KSD-D0O006-002 2 SDB2060PI Rating and Characteristic Curves Fig. 1) Typical Forward Characteristics (Per Diode) Fig. 2) Typical Reverse Characteristics (Per Diode) Fig. 3) Maximum Forward Derative Curve Fig. 4) Forward Power Dissipation (Per Diode) Fig. 5) Maximum Non-Repetitive Peak Forward Surge Current (Per Diode) Fig. 6) Typical Junction Capacitance (Per Diode) KSD-D0O006-002 3 SDB2060PI Package Outline Dimension KSD-D0O006-002 4 SDB2060PI The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-D0O006-002 5