SDB5200PH Schottky Barrier Rectifier DUAL COMMON CATHODE SCHOTTKY RECTIFIER Features Low forward voltage drop Low power loss and High efficiency Low leakage current High surge capability Pin Configuration Pin 1: Cathode Pin 2: Anode Full lead (Pb)-free and RoHS compliant device Applications TO-220F-2L Power supply - Output rectification Product Characteristics Converter Free-wheeling diode IF(AV) 5A Reverse battery protection VRRM 200V VFM at 125℃ 0.72V (Typ.) IFSM 120A Power inverters Description The SDB5200PH has two schottky barriers arranged in a common cathode configuration. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. Ordering Information Device Marking Code Package Packaging SDB5200PH SDB5200PH TO-220F-2L Tube Marking Information AUK = Manufacture Logo ∆ = Control Code of Manufacture YMDD = Date Code Marking -. Y = Year Code -. M = Monthly Code -. DD = Daily Code SDB5200PH = Specific Device Code KSD-D0Q020-003 1 SDB5200PH Absolute Maximum Ratings (Limiting Values) Characteristic Symbol Value Unit Maximum repetitive reverse voltage Maximum working peak reverse voltage Maximum DC blocking voltage VRRM VRWM VR 200 V Maximum average forward rectified current IF(AV) 5 A Peak forward surge current 8.3ms single half sine-wave superimposed on rated load per diode IFSM 120 A Storage temperature range Tstg -45℃ to +150℃ ℃ Tj 150 ℃ Symbol Value Unit Rth(j-c) 4.0 ℃/W Maximum operating junction temperature Thermal Characteristics Characteristic Maximum thermal resistance junction to case Electrical Characteristics (Per Diode) Characteristic Symbol VFM (1) Peak forward voltage drop IRM (1) Reverse leakage current Junction capacitance Cj Test Condition Min. Typ. Max. Unit Tj=25℃ - 0.85 0.95 V Tj=125℃ - 0.72 0.76 V Tj=25℃ - - 10 uA Tj=125℃ - - 10 mA - 150 - pF IFM = 5A VR = VRRM VR = 1VDC, f=1MHz Note : (1) Pulse test : tP≤380 ㎲, Duty cycle≤2% To evaluate the conduction losses use the following equation: PF = 0.68 IF(AV) + 0.032 IF2(RMS) IFM Forward Voltage : VFM = Vto + rd IFM 2 IF(AV) rd Conduction Loss : PF = Vto IF(AV) + rd IF2(RMS) IF(AV) Vto VFM KSD-D0Q020-003 2 SDB5200PH Rating and Characteristic Curves Fig. 2) Typical Reverse Characteristics ㎂ Fig. 1) Typical Forward Characteristics Fig. 3) Maximum Forward Derative Curve Fig. 4) Forward Power Dissipation Fig. 5) Maximum Non-Repetitive Peak Forward Surge Current Fig. 6) Typical Junction Capacitance KSD-D0Q020-003 3 SDB5200PH Package Outline Dimension KSD-D0Q020-003 4 SDB5200PH The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-D0Q020-003 5