STC401D NPN Silicon Transistor Features • • • • PIN Connection Low saturation switching application Voltage regulator application Low saturation : VCE(SAT)=0.4V Max. High Voltage : VCEO=60V Min. TO-252 Ordering Information Type NO. Marking STC401D Package Code STC401□ TO-252 □ : Year & Week Code Absolute maximum ratings Characteristic Symbol Ratings Unit Collector-Base voltage VCBO 80 V Collector-Emitter voltage VCEO 60 V Emitter-base voltage VEBO 5 V IC 1 A(DC) ICP* 2 A(Pulse) PC(Ta= 25°C) 1 PC(TC= 25°C) 10 Junction temperature Tj 150 °C Storage temperature Tstg -55~150 °C Collector current Collector dissipation W * : Single pulse, tp= 300 ㎲ KSD-T6O028-000 1 STC401D Electrical Characteristics Characteristic Symbol Test Condition Min. Typ. Max. Unit Collector-Base breakdown voltage BVCBO IC=100 ㎂, IE=0 80 - - V Collector-Emitter breakdown voltage BVCEO IC=1mA, IB=0 60 - - V Emitter-Base breakdown voltage BVEBO IE=10mA, IC=0 5 - - V Collector cut-off current ICBO VCB=60V, IE=0 - - 0.1 μA Emitter cut-off current IEBO VEB=5V, IC=0 - - 0.1 μA 200 - 400 DC current gain hFE * 80 - - VCE=2V, IC=100mA VCE=2V, IC=1A - Base-Emitter on voltage VBE(ON) VCE=2V, IC=500mA - - 1.2 V Collector-Emitter saturation voltage VCE(sat) IC=500mA, IB=50mA - - 0.4 V VCB=10V, IE=0, f=1MHz - 10 - pF VCB=10V, IC=50mA - 160 - MHz Collector output capacitance Transition frequency Cob fT * hFE rank : 200~400 Only KSD-T6O028-000 2 STC401D Electrical Characteristic Curves Fig. 1 PC - Ta W Fig. 2 VCE - IC Fig. 3 hFE-IC Fig. 4 hFE-IC Fig. 5 hFE-IC Fig. 6 hFE-IC KSD-T6O028-000 3 STC401D Electrical Characteristic Curves Fig. 7 Cob - VCB Fig. 8 IC - VCE Fig. 9 fT - IC Fig. 10 Safe operating Area KSD-T6O028-000 4 STC401D Outline Dimension ※Recommend PCB solder land [Unit: mm] 2.50 7.00 7.00 1.50 4.60 KSD-T6O028-000 5 STC401D The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T6O028-000 6