STC401F NPN Silicon Transistor PIN Connection Descriptions • General purpose amplifier • High voltage application Features • • • • Low saturation switching application Voltage regulator application Low saturation: VCE(sat)= 0.4V typ High voltage : VCEO=60V Min SOT-89 Ordering Information Type No. Marking Package Code STC401F C401 YWW SOT-89 C401: DEVICE CODE, YWW(Y : Year code, WW : Weekly code) Absolute maximum ratings Characteristic (Ta=25°C) Symbol Ratings Unit Collector-Base voltage VCBO 80 V Collector-Emitter voltage VCEO 60 V Emitter-base voltage VEBO 5 V IC 1 A PC 0.5 PC* 1 Junction temperature Tj 150 °C Storage temperature Tstg -55~150 °C Collector current Collector dissipation Characteristic Thermal resistance W Symbol Typ. Max Rth(J-A) - 250.0 Junction-ambient Unit ℃/W Rth(J-A) * - 125.0 * : When mounted on ceramic substrate(250 ㎟×0.8t) KSD-T5B014-002 1 STC401F Electrical Characteristics Characteristic Symbol Test Condition Min. Typ. Max. Unit Collector-Base breakdown voltage BVCBO IC=100 ㎂, IE=0 80 - - V Collector-Emitter breakdown voltage BVCEO IC=1mA, IB=0 60 - - V Emitter-Base breakdown voltage BVEBO IE=10mA, IC=0 5 - - V Collector cut-off current ICBO VCB=60V, IE=0 - - 0.1 μA Emitter cut-off current IEBO VEB=5V, IC=0 - - 0.1 μA 200 - 500 DC current gain hFE * VCE=2V, IC=100mA VCE=2V, IC=1A 80 - - Base-Emitter on voltage VBE(ON) VCE=2V, IC=500mA - - 1.2 V Collector-Emitter saturation voltage VCE(sat) IC=500mA, IB=50mA - - 0.4 V VCB=10V, IE=0, f=1MHz - 10 - pF VCB=10V, IC=50mA - 160 - MHz Collector output capacitance Transition frequency Cob fT * hFE rank : 200~500 Only KSD-T5B014-002 2 STC401F Electrical Characteristic Curves Fig. 1 PC - Ta ㎽ Fig. 2 VCE - IC Fig. 3 hFE-IC Fig. 4 hFE-IC Fig. 5 hFE-IC Fig. 6 hFE-IC KSD-T5B014-002 3 STC401F Electrical Characteristic Curves Fig. 7 Cob - VCB Fig. 8 IC - VCE Fig. 9 fT - IC Fig. 10 Safe operating Area * * * ) × × KSD-T5B014-002 4 STC401F Outline Dimension(mm) ※ Recommend PCB solder land KSD-T5B014-002 [Unit: mm] 5 STC401F The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T5B014-002 6