KODENSHI STK7002

STK7002
Advanced N-Channel MOSFET
HIGH SPEED SWITCHING APPLICATIONS
Features




PIN Connection
Low Gate Threshold Voltage
Low Crss : Crss=2.0pF(Typ.)
Voltage controlled small signal switch
Low RDS(on) : RDS(on)=5Ω(Max.)
D
D
Ordering Information
G
Type No.
Marking
Package Code
STK7002
K702 □
① ②
SOT-23
G
S
SOT-23
S
Marking Diagram
K702 : Specific Device Code
K702 □
□ : year & week Code Marking
Absolute maximum ratings (TA=25C unless otherwise noted)
Characteristic
Symbol
Rating
Unit
Drain-source voltage
VDSS
60
V
Gate-source voltage
VGSS
20
V
ID
115
mA
IDM
800
mA
TJ
150
Tstg
-55~150
Symbol
Rating
Unit
PD
350
mW
Rth(J-A)
357
C/W
Drain current (DC)
*
Drain current (Pulsed)
*
Junction temperature
Storage temperature range
C
* Limited by maximum junction temperature
Thermal Characteristics
Characteristic
Power dissipation
Thermal resistance, Junction-Ambient
*
* Device mounted on FR-4 PCB, 99.5% Alumina 10 x 8 x 0.6mm. Minimum land pad size
KSD-T5C041-005
1
STK7002
Electrical Characteristics (TA=25C unless otherwise noted)
Characteristic
Off Characteristics (Note1)
Drain-source breakdown voltage
Symbol
BVDSS
Test Condition
Min.
Typ. Max. Unit
ID=10uA, VGS=0
60
-
-
VDS=60V, VGS=0
-
-
1.0
VDS=60V, VGS=0, @TC=125C
-
-
200
V
Drain-source cut-off current
IDSS
Gate leakage current
IGSS
VDS=0V, VGS=20V
-
-
100
nA
Gate threshold voltage
VGS(th)
ID=250uA, VDS=VGS
1.0
2.0
2.5
V
Drain-source on-resistance
RDS(ON)
VGS=10V, ID=500mA
-
2.4
5.0
VGS=5V, ID=50mA
-
3.2
5.0
80
-
-
-
22
-
-
11
-
-
2
-
-
7
-
-
11
-
uA
On Characteristics (Note1)
Forward transfer conductance
gfs
VDS=10V, ID=100mA

mS
Dynamic Characteristics
Input capacitance
Ciss
Output capacitance
Coss
Reverse transfer capacitance
Crss
VGS=0V, VDS=25V, f=1MHz
pF
Switching Characteristics
Turn-on delay time
tD(ON)
Turn-off delay time
tD(OFF)
VDD=30V, ID=100mA
VGS=10V, RG=25Ω
ns
Note1 : Short duration test pulse used to minimize self-heating effect.
KSD-T5C041-005
2
STK7002
Electrical Characteristic Curves
Fig. 1 ID - VDS
Fig. 2 ID - VGS
Fig. 3 RDS(on) - ID
Fig. 4 RDS(on) - VGS
Fig. 6 VGS - Qg
Fig. 5 Capacitance - VDS
D
1
KSD-T5C041-005
3
STK7002
Electrical Characteristic Curves
Fig. 7 IS - VSD
Fig. 8 Resistive Switching Test Circuit & Waveform
KSD-T5C041-005
4
STK7002
Outline Dimension
unit: mm
※ Recommended Land Pattern [unit: mm]
KSD-T5C041-005
5
STK7002
The AUK Corp. products are intended for the use as components in general electronic
equipment (Office and communication equipment, measuring equipment, home
appliance, etc.).
Please make sure that you consult with us before you use these AUK Corp. products
in equipments which require high quality and / or reliability, and in equipments which
could have major impact to the welfare of human life(atomic energy control, airplane,
spaceship, transportation, combustion control, all types of safety device, etc.). AUK
Corp. cannot accept liability to any damage which may occur in case these AUK Corp.
products were used in the mentioned equipments without prior consultation with AUK
Corp..
Specifications mentioned in this publication are subject to change without notice.
KSD-T5C041-005
6