SUT466N Epitaxial planar PNP silicon transistor Descriptions • Complex type bipolar transistor Features • Reduce quantity of parts and mounting cost • High collector power dissipation : PC=500mW(Max.) • 2 PNP Chips in SOT-26 PKG Package : SOT-26 Ordering Information Type NO. Marking Package Code SUT466N 4N□ SOT-26 □ : Year & Week Code PIN Assignment & Description Pin Description 1 Collector 2 2 Base 1 3 Emitter 1 4 Collector 1 5 Base 2 6 Emitter 2 [Pin Assignment] KSD-T5P007-001 1 SUT466N Absolute maximum ratings(Tr1, Tr2) Characteristic Ta=25°C Symbol Ratings Unit Collector-Base voltage VCBO -60 V Collector-Emitter voltage VCEO -40 V Emitter-base voltage VEBO -5 V IC -600 mA ICP* -1.2 A PC** 500 mW Tj 150 °C Tstg -55~150 °C Collector current Collector dissipation Junction temperature Storage temperature range * : Single pulse, tp= 300 ㎲ ** : Total rating(Each terminal mounted on a recommended solder land) Electrical Characteristics(Tr1, TR2) Characteristic Symbol Ta=25°C Test Condition Min. Typ. Max. Unit Collector-Base breakdown voltage BVCBO IC=-10μA, IE=0 -60 - - V Collector-Emitter breakdown voltage BVCEO IC=-1mA, IB=0 -40 - - V Emitter-Base breakdown voltage BVEBO IE=-10μA, IC=0 -5 - - V Collector cut-off current ICBO VCB=-40V, IE=0 - - -20 nA DC current gain hFE VCE=-10V, IC=-10mA 100 - - - Collector-Emitter saturation voltage Transition frequency VCE(sat) IC=-150mA, IB=-15mA - - -0.4 V fT VCE=-5.0V, IC=-20mA, f=100MHz 200 - - MHz - - 8 pF - - 45 ns - - 10 ns Collector output capacitance Cob Turn-on time ton VCB=-10V, IE=0, f=1MHz VCC=-30Vdc,IC=-150mAdc, IB1=-15mAdc Delay time td Rise time tr - - 40 ns Turn-off time toff - - 100 ns Storage time ts - - 80 ns Fall time tf - - 30 ns VCC=-6.0Vdc,IC=-150mAdc, IB1=IB2=-15mAdc KSD-T5P007-001 2 SUT466N Electrical Characteristic Curves [ Tr1, Tr2 ] Fig. 2 hFE- IC ㎽ Fig. 1 PC-Ta Fig. 3 VCE(sat)-IC Fig. 4 Cob-VCB KSD-T5P007-001 3 SUT466N SOT-26 Outline Dimension(mm) ※ Recommend PCB solder land KSD-T5P007-001 [Unit: mm] 4 SUT466N The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T5P007-001 5