SUT093N Epitaxial planar NPN silicon transistor Descriptions • Complex type bipolar transistor Features • Reduce quantity of parts and mounting cost • High collector power dissipation: PC= 500mW(Max) Package : SOT-26 Ordering Information Type NO. Marking Package Code SUT093N 93◇□ SOT-26 ◇: Hfe rank, □ : Year & Week Code PIN Assignment & Description 6 5 4 Tr1 Tr2 1 2 3 Pin Description 1 Emitter 1 2 Base 2 3 Collector 2 4 Emitter 2 5 Base 1 6 Collector 1 [Pin Assignment] KSD-T5P008-000 1 SUT093N Absolute maximum ratings(TR1, TR2) Characteristic (Ta=25°C) Symbol Ratings Unit Collector-Base voltage VCBO 100 V Collector-Emitter voltage VCEO 90 V Emitter-Base voltage VEBO 6 V IC 0.3 A(DC) ICP* 0.6 A(Pulse) PC** 0.5 W Junction temperature TJ 150 °C Storage temperature Tstg -55~150 °C Collector current Collector power dissipation * : Single pulse, tp= 300 ㎲ ** : Total rating(Each terminal mounted on a recommended solder land) Electrical Characteristics(TR1, TR2) Characteristic Symbol (Ta=25°C) Test Condition Collector-Base breakdown voltage BVCBO IC=100μA, IE=0 Collector-Emitter breakdown voltage BVCEO Emitter-Base breakdown voltage Min. Typ. Max. Unit 100 - - V IC=1 ㎃, IB=0 90 - - V BVEBO IE=10 ㎂, IC=0 6 - - V Collector cut-off current ICBO VCB=100V, IE=0 - - 0.1 ㎂ Emitter cut-off current IEBO VEB=4V, IC=0 - - 0.1 ㎂ DC current gain Collector-Emitter saturation voltage Base-Emitter saturation voltage hFE 1) VCE=5V, IC=10 ㎃ 80 - 250 - VCE(sat)(1) 2) IC=10 ㎃, IB=1 ㎃ - - 0.2 V VCE(sat)(2) 2) IC=50 ㎃, IB=5 ㎃ - - 0.5 V VBE(sat)(1) 2) IC=10mA, IB=1mA - - 1 V VBE(sat)(2) 2) IC=50mA, IB=5mA - - 1 V fT VCE=10V, IC=10 ㎃ 100 - 400 ㎒ - 4 - ㎊ Transition frequency Collector output capacitance Cob VCB=10V, IE=0, f=1 ㎒ * Note 1) hFE Rank / A : 80~150, B : 130~250 * Note 2) Pulse Tester : Pulse Width ≤300μs, Duty Cycle ≤2.0% KSD-T5P008-000 2 SUT093N Electrical Characteristic Curves(TR1, TR2) Fig. 2 IC - VBE Fig. 3 hFE - IC Fig. 4 VCE(sat) , VBE(sat) - IC ㎽ Fig. 1 PC - Ta v Fig. 5 fT - IC Fig. 6 Cob - VCB KSD-T5P008-000 3 SUT093N SOT-26 Outline Dimension(mm) ※ Recommend PCB solder land KSD-T5P008-000 [Unit: mm] 4 SUT093N The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T5P008-000 5