SUTP052G Dual PNP Bipolar transistor Descriptions • General purpose amplifier • Recommended for LED Drive Application Features • Thermally Enhanced Power PKG • Low saturation voltage: VCE(sat)=-0.15V Typ. @ IC=-1A, IB=-50mA • Large collector current capacity: IC=-2A • 2 PNP chips in TESOP-8 Package TESOP-8 Ordering Information Type NO. Marking Package Code SUTP052G SUTP052□ TESOP-8 □ : Year & Week Code Absolute maximum ratings(TR1, TR2) Characteristic (Ta=25°C) Symbol Ratings Unit Collector-base voltage VCBO -50 V Collector-emitter voltage VCEO -50 V Emitter-base voltage VEBO -5 V IC -2 A(DC) ICP* -4 A(Pulse) 0.75 W/TOTAL 0.55 W/ELEMENT PC(Tc=25°C) 7.5 W/TOTAL Junction temperature TJ 150 °C Storage temperature Tstg -55~150 °C Collector current PC(Ta=25°C) ** Collector power dissipation * : Single pulse, tp= 300 ㎲ ** : Each terminal mounted on a recommended solder land KSD-T7K005-000 1 SUTP052G Electrical Characteristics(TR1, TR2) Characteristic Symbol Test Condition Min. Typ. Max. Unit Collector-emitter breakdown voltage BVCEO IC=-1mA, IB=0 -50 - - V Collector cut-off current ICBO VCB=-50V, IE=0 - - -0.1 μA Emitter cut-off current IEBO VEB=-5V, IC=0 - - -0.1 μA hFE1) VCE=-2V, IC=-0.5A* 120 - 240 hFE VCE=-2V, IC=-1.5A* 40 - - Collector-emitter saturation voltage VCE(sat) IC=-1A, IB=-0.05A* - - -0.35 V Base-emitter saturation voltage VBE(sat) IC=-1A, IB=-0.05A* - - -1.2 V fT VCE=-2V, IC=-0.05A - 215 - MHz VCB=-10V, IE=0, f=1MHz - 24 - pF DC current gain Transition frequency Collector output capacitance Switching Time Cob Turn-on Time ton - 100 - Storage Time tstg - 300 - - 50 - Fall Time tf < nS Note 1) hFE Rank : 120~240 only *: Pulse test : tP≤300µs, Duty cycle≤2% KSD-T7K005-000 2 SUTP052G Electrical Characteristic Curves(TR1, TR2) Fig. 2 IC - VBE Fig. 3 IC - VCE Fig. 4 hFE - IC Fig. 5 VCE(sat) - IC Fig. 6 VBE(sat) - IC ㎽ Fig. 1 PC - Ta KSD-T7K005-000 3 SUTP052G Electrical Characteristic Curves(TR1, TR2) Fig. 7 COb - VCB Fig. 8 Safe Operating Area * * * * ) ℃ KSD-T7K005-000 4 SUTP052G Outline Dimension ※Recommend PCB solder land [Unit: mm] KSD-T7K005-000 5 SUTP052G The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T7K005-000 6