STC4073D NPN Silicon Transistor Descriptions PIN Connection • General purpose amplifier • High voltage application Features • High collector breakdown voltage : VCEO = 120V • Low collector saturation voltage : VCE(sat)=0.5V(MAX.) TO-252 Ordering Information Type No. Marking STC4073D STC4073□ Package Code TO-252 □ : Year & Week Code Absolute maximum ratings Characteristic (Ta=25°C) Symbol Ratings Unit Collector-Base voltage VCBO 120 V Collector-Emitter voltage VCEO 120 V Emitter-Base voltage VEBO 6 V IC 1 A(DC) ICP* 2 A(Pulse) PC(Ta= 25°C) 1 PC(TC= 25°C) 10 Junction temperature TJ 150 °C Storage temperature Tstg -55~150 °C Collector current W Collector power dissipation * : Single pulse, tp= 300 ㎲ KSD-T6O027-000 1 STC4073D Electrical Characteristics (Ta=25°C) Characteristic Symbol Test Condition Collector-Base breakdown voltage BVCBO IC=100μA, IE=0 120 - - V Collector-Emitter breakdown voltage BVCEO IC=1mA, IB=0 120 - - V Emitter-Base breakdown voltage BVEBO IE=100μA, IC=0 6 - - V Collector cut-off current ICBO VCB=120V, IE=0 - - 0.1 ㎂ Emitter cut-off current IEBO VEB=4V, IC=0 - - 0.1 ㎂ DC current gain hFE 1) VCE=5V, IC= 30 ㎃ 200 - 400 - - - 0.5 V 0.1 V Collector-Emitter saturation voltage 2) IC=500 ㎃, IB=50 ㎃ VCE(sat) IC=100 ㎃, IB=10 ㎃ Min. Typ. Max. - Unit Base-Emitter saturation voltage VBE(sat) 2) IC=500 ㎃, IB=50 ㎃ - - 1.2 V Transition frequency fT VCE=5V, IC= 50 ㎃ - 170 - ㎒ Collector output capacitance Cob VCB=10V, IE=0, f=1 ㎒ - 10 - ㎊ * Note 1) hFE Rank : 200~400 only * Note 2) Pulse Tester : Pulse Width ≤300μs, Duty Cycle ≤2.0% KSD-T6O027-000 2 STC4073D Electrical Characteristic Curves Fig. 1 PC - Ta Fig. 2 IC - VBE Fig. 3 VCE(sat) - IC Fig. 4 IC - VCE Fig. 5 IC - VCE Fig. 6 hFE-IC KSD-T6O027-000 3 STC4073D Electrical Characteristic Curves Fig. 7 hFE-IC Fig. 8 hFE-IC Fig. 9 hFE-IC Fig. 10 Cob - VCB ℃ Fig. 11 fT - IC Fig. 12 Safe operating Area * * * KSD-T6O027-000 4 STC4073D Outline Dimension ※Recommend PCB solder land [Unit: mm] 2.50 7.00 7.00 1.50 4.60 KSD-T6O027-000 5 STC4073D The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T6O027-000 6