CAR1212DC 1200 Watt, +12V DC Input Front End by Lineage Power Features: ∎ Compact 1U High Profile ∎ Constant Current Characteristic ∎ Visual LED Indicators ∎ Hot Plug / Redundant Parallel Operation with Active Load Sharing ∎ No Minimum Load Requirements ∎ Analog, I2C, and PMBuss control and monitoring ∎ Four (4) CAR1212DC Modules per Rack ∎ 3.6KW N+1 Capability/ or 4.8KW Total Power FEATURES High Power Density >16W/in3 Load Sharing & Fault Tolerant Automatic Fan Speed Control System Scalability up to 4.8kW Universal Input & International Certifications BENEFITS More system space for application circuits and hardware Excellent reliability in N+1 operation Reduces audible noise and increases reliability Allows flexibility with minimum investment Reduces logistical costs SPECIFICATIONS Input Voltage Range 1,200 Watt +12V Front End Power Supply with 48 VDC Input Range -36 ~ -75 VDC Input Range Turn off (Hysteresis) -32 VDC Turn Off Input Current Maximum 38A, -36VDC Input, Full Load and 89% Efficiency (max) Input Protection Two fuses in the negative leg rated at 30 Amps Each Efficiency 90% typical, at 12Vdc output, -48Vdc nominal input (including Oring Mosfets). Peak Efficiency at 60-80% load Hold-Up Time 2.5ms at 1200W (typical) nominal -48Vdc Isolation 1500 VDC Input to Output, 100 VDC Input to Frame Output Voltage Range 10.8~13.2 VDC with remote programming Output Current 100A @ 12Vout (max continuous) Standby Bias Voltage 3.3VSB @ 1A (optional 5VSB) Voltage Regulation ±2% of Vnom for any combination of line, load and temperature Output Ripple & Noise 1% (pk-pk) @ 20MHz with 0.1µF ceramic and 10µF Tantalum caps at the output Transient Response 5% max deviation Recovery time 300μs @ 50% load step and di/dt < 1A/μs Remote On/Off ON if >3V or open; OFF if <1V (max. sink 1mA) Current Limit Protection 110~130A, Constant current 12Vdc down to 11.8vdc. True constant current for Isc Non–hiccup mode (adjustable via I2C) Short Circuit Protection Self protected with auto recovery Over Voltage Protection Trip level >14.5~15.5V, Reset condition by recycling the AC input or applying Remote or software ON/OFF Operating Temperature -10°C to +70°C. power derating above 50°C at change 2.5%/°C (startup @ -40C, within spec @ 30 min of warm up) Over Temperature Protection Non-Latching, thermal shutdown point is set for 120°C and recovery point is 110°C EMI FCC-B & EN55022-B with specified filter or at rack level, GR-1089-CORE LED Indicators 3 LED Indicators to indicate Green = Input OK / Green = DCOK / Amber = Fault Analog Status & Control Voltage Programming (V Prog), Load sharing (I Share), Remote On/Off, Current Monitor (I Monitor), Input OK, DC OK, Temperature Warning, Fault, PS Present, Module Enable, Digital Status & Control I2C and PMBus, see detailed specification for details Shock & Vibration NEBS GR-63-CORE Level 3 Dimensions 11.20 x 4.00 x 1.65” / 284.5 x 101.6 x 41.91mm Safety Approvals IEC/UL/CSA/EN60950-1, CE Mark (LVD) Options 5VSB Output KEY MARKET SEGMENTS & APPLICATIONS ∎ Distributed Power ∎ RF Amplifiers ∎ High End Servers ∎ ATE Equipment ∎ High End Routers and Switchgear ∎ Semiconductor Burn-in Equipment www.LineagePower.com rev 100225 Lineage Power Lineage Power Lineage Power (China) 3000 Skyline Dr. Mesquite, TX 75149 Phone: (972) 284-2000 2841 Dow Avenue Tustin, CA 92780 USA Phone: (714) 544-6665 1353 Chenqiao Road, Shanghai Sengpu Industrial Park Shanghai, 201401 China Phone: 021 6710 8910 CAR1212DC 11200 Watt, +12V DC Input Front End by Lineage Power OUTLINE DRAWING All Dimensions in Inches (mm) Tolerance: .XX = ± .02 in (.50 mm) .XXX = ± .010 in (.254 mm) LED INDICATOR TEST CONDITION 1 NORMAL OPERATION 2 OUT OF INPUT RANGE 3 OVP 4 OVER CURRENT 5 THERMO ALARM INP OK Green Off Green Green Green DC OK Green Off Off Off Green FAULT Off Red Red Red Red MONITORING SIGNALS DC OK INP OK Low Low High High High Low High Low Low Low FAULT Low High High High High TEMP OK High High High High Low Test condition # 2 had two modules plug in. One module running and the other module with no DC input PART NUMBER DEFINITION GUIDE: CONNECTOR DRAWING: CAR 12 12 DC B x xx -1A Series 12=1200W Output Current 12=12V Output Voltage DC= 48Vin Front End Type B=Bezel Faceplate Rev. Blank=Non-compliant YO=5 of 6 Compliant ZO=6 of 6 Compliant RoHS 5=5VSB Options Output Connector: Molex 46437-1041 Examples: CAR1212DCB-Z01A 12V Front, 6 of 6 RoHS Compliant CAR1212DCB5-Y01A 12V Front End, 5VSB 5 of 5 RoHS Compliant rev 100225 Pin A1 A2 A3 A4 A5 A6 A7 A8 B1 B2 B3 B4 Functions VPROG PS_Present OVP Test Point Fault Signal Remote Sense (+) Temp Warning N/C Remote Sense (-) Write Protect DC OK INP OK Signal Return Pin B5 B6 B7 B8 C1 C2 C3 C4 C5 C6 C7 C8 Function Interrupt (/SMBALERT) Iout Monitor Vstb Module Enable (Short pin) Remote ON/OFF SDA SCL Vstb Return I²C Address (A2) I²C Address (A1) I²C Address (A0) I Share Pin P1 P2 P3 P4 P5 P6 P7 P8 P9 Functions +48Vdc -48Vdc Return PE +12Vout +12Vout +12Vout Output Return Output Return Output Return www.LineagePower.com Lineage Power Lineage Power Lineage Power (China) 3000 Skyline Dr. Mesquite, TX 75149 Phone: (972) 284-2000 2841 Dow Avenue Tustin, CA 92780 USA Phone: (714) 544-6665 1353 Chenqiao Road, Shanghai Sengpu Industrial Park Shanghai, 201401 China Phone: 021 6710 8910 E