LITE- O N TECH NO LO G Y CO RP O RATIO N Property of LITE-ON Only FEATURES * High current transfer ratio ( CTR : MIN. 1000% at IF = 1mA, VCE = 2V ) * High input-output isolation voltage ( Viso = 3,750Vrms ) * High collector-emitter voltage ( VCEO = 300V ) * Mini-flat package : 2.0mm profile : LTV-352T * UL approved ( No. E113898 ) * CUL approved ( No. E113898 , 01SC19287 ) * CSA approved ( No. 1243207 ) * FIMKO approved ( No. FI-16420 ) * NEMKO approved ( No. P01100403 ) * DEMKO approved ( No. 310475-01 ) * SEMKO approved ( No. 0109173 / 01-08 ) * VDE approved ( No. 094722 ) * RoHS compliance APPLICATIONS * Hybrid substrates that require high density mounting. * Telephone sets * Copiers, facsimiles * Interfaces with various power supply circuits, power distribution boards. Part No. : LTV-352T BNS-OD-C131/A4 Page : 1 of 9 LITE- O N TECH NO LO G Y CO RP O RATIO N Property of LITE-ON Only OUTLINE DIMENSIONS LTV-352T : 2.54±0.25 Pin No. and Internal connection diagram Date Code *1 3 4.40±0.2 4 Factory Code *2. Rank *3 2 3. Emitter 4. Collector 5.30±0.3 0.10±0.1 2.00±0.2 0.2±0.05 3.85±0.3 1 1. Anode 2. Cathode 0.40±0.1 7.00+0.2 -0.7 *1. 2-digit date code. *2. Factory identification mark shall be marked (Z : Taiwan, Y : Thailand, X : China). *3. Rank shall be or shall not be marked. Part No. : LTV-352T BNS-OD-C131/A4 Page : 2 of 9 LITE- O N TECH NO LO G Y CO RP O RATIO N Property of LITE-ON Only TAPING DIMENSIONS Description Tape wide Pitch of sprocket holes Distance of compartment Distance of compartment to compartment Part No. : LTV-352T BNS-OD-C131/A4 Symbol W P0 F P2 P1 Dimensions in mm ( inches ) 12 ± 0.3 ( .47 ) 4 ± 0.1 ( .15 ) 5.5 ± 0.1 ( .217 ) 2 ± 0.1 ( .079 ) 8 ± 0.1 ( .315 ) Page : 3 of 9 LITE- O N TECH NO LO G Y CO RP O RATIO N Property of LITE-ON Only ABSOLUTE MAXIMUM RATING ( Ta = 25°C ) PARAMETER SYMBOL RATING UNIT Forward Current IF 50 mA Reverse Voltage VR 6 V Power Dissipation P 70 mW Collector - Emitter Voltage VCEO 300 V Emitter - Collector Voltage VECO 0.1 V Collector Current IC 150 mA Collector Power Dissipation PC 150 mW Ptot 170 mW Viso 3,750 Vrms Operating Temperature Topr -55 ~ +100 °C Storage Temperature Tstg -55 ~ +150 °C Tsol 260 °C INPUT OUTPUT Total Power Dissipation *1 Isolation Voltage *2 Soldering Temperature *1. AC For 1 Minute, R.H. = 40 ~ 60% Isolation voltage shall be measured using the following method. (1) Short between anode and cathode on the primary side and between collector and emitter on the secondary side. (2) The isolation voltage tester with zero-cross circuit shall be used. (3) The waveform of applied voltage shall be a sine wave. *2. For 10 Seconds Part No. : LTV-352T BNS-OD-C131/A4 Page : 4 of 9 LITE- O N TECH NO LO G Y CO RP O RATIO N Property of LITE-ON Only ELECTRICAL - OPTICAL CHARACTERISTICS ( Ta = 25°C ) PARAMETER INPUT OUTPUT *1 CTR = CONDITIONS Forward Voltage VF — 1.2 1.4 V IF=10mA Reverse Current IR — — 10 µA VR=4V Terminal Capacitance Ct — 30 250 pF V=0, f=1KHz Collector Dark Current ICEO — — 200 nA VCE=200V, IF=0 Collector-Emitter Breakdown Voltage BVCEO 300 — — V IC=0.1mA IF=0 Emitter-Collector Breakdown Voltage BVECO 0.1 — — V IE=10µA IF=0 IC 10 — — mA *1 Current Transfer Ratio CTR 1,000 — — % Collector-Emitter Saturation Voltage VCE(sat) — — 1.2 V IF=20mA IC=100mA Isolation Resistance Riso — Ω DC500V 40 ~ 60% R.H. Floating Capacitance Cf — 0.6 1 pF V=0, f=1MHz Cut-Off Frequency fc 1 7 — kHz Response Time (Rise) tr — 100 300 µs Response Time (Fall) tf — 20 100 µs Collector Current TRANSFER CHARACTERISTICS SYMBOL MIN. TYP. MAX. UNIT 5×1010 1×1011 IF=1mA VCE=2V VCE=2V, IC=20mA RL=100Ω, -3dB VCC=2V, IC=20mA RL=100Ω IC × 100% IF Part No. : LTV-352T BNS-OD-C131/A4 Page : 5 of 9 LITE- O N TECH NO LO G Y CO RP O RATIO N Property of LITE-ON Only CHARACTERISTICS CURVES Fig.1 Forward Current vs. Ambient Temperature Fig.2 Collector Power Dissipation vs. Ambient Temperature Collector power dissipation Pc (mW) 60 Forward current I F(mA) 50 40 30 20 10 0 -55 0 25 50 75 100 125 200 150 100 50 0 -55 o 4 3 2.5 2 1.5 125 1 100 C o o 80 C 40 C o 20 C o 60 C 10 0.5 1 0 1 2 3 4 5 0.5 0.7 0.9 1.1 Forward current I F(mA) Fig.6 Collector Current vs. Collector-emitter Voltage 7000 100 VCE= 2V Collector current Ic (mA) 6000 5000 4000 3000 2000 1000 0 0.1 2mA 10mA 5mA 80 3mA 2.5mA 60 1.5mA 1.5mA 1mA PC (MAX.) 40 20 I F= 0.5mA 0 1 Forward current (mA) Part No. : LTV-352T 1.3 1.5 1.7 1.9 Forward voltage (V) Fig.5 Current Transfer Ratio vs. Forward Current Current transfer ratio CTR (%) 100 o 0 BNS-OD-C131/A4 75 100 Ic= 5mA 10mA 30mA 50mA 70mA 100mA 3.5 50 Fig.4 Forward Current vs. Forward Voltage Forward current (mA) Collector-emitter saturation voltage VCE(sat) (V) 5 25 Ambient temperature Ta ( C) Fig.3 Collector-emitter saturation Voltage vs. Forward current 4.5 0 o Ambient temperature Ta ( C) 10 0 1 2 3 4 5 Collector-emitter voltage VCE(V) Page : 6 of 9 LITE- O N TECH NO LO G Y CO RP O RATIO N Property of LITE-ON Only CHARACTERISTICS CURVES Relative current transfer ratio (%) 1.2 Fig.8 Collector-emitter Saturation Voltage vs. Ambient Temperature I F= 1mA VCE= 2V 1.0 0.8 0.6 0.4 0.2 Collector-emitter saturation voltage VCE (sat) (V) Fig.7 Relative Current Transfer Ratio vs. Ambient Temperature 1.2 I F= 20mA I C= 100mA 1.0 0.8 0.6 0.4 0.2 0 20 40 60 80 100 20 O 100 Fig.10 Response Time vs. Load Resistance 1000 VCE= 200V 500 Response time ( s) Collector dark current ICEO (nA) 80 VCE= 2V I C= 20mA Ta= 25 C tr O 100 10 200 100 tf 50 td ts 20 10 5 2 1 20 40 60 80 1 100 O Fig.11 Frequency Response O -5 1 10 Test Circuit for Response Time VCE= 2V I C= 20mA Ta= 25 C 0 0.1 Load resistance RL (k ) Ambient temperature Ta ( C) Voltage gain Av (dB) 60 O Fig.9 Collector Dark Current vs. Temperature 1000 40 Ambient temperature Ta ( C) Ambient temperature Ta ( C) Vcc Input RD RL Input Output Output 10% 90% td -10 ts tr -15 RL= 1k 100 tf Test Circuit for Frequency Response 10 Vcc -20 RD -25 0.1 1 10 100 RL Output 500 Frequency f (kHz) Part No. : LTV-352T BNS-OD-C131/A4 Page : 7 of 9 LITE- O N TECH NO LO G Y CO RP O RATIO N Property of LITE-ON Only Temperature Profile of Soldering Reflow (1) One time soldering reflow is recommended within the condition of temperature and time profile shown below. Part No. : LTV-352T BNS-OD-C131/A4 Page : 8 of 9 LITE- O N TECH NO LO G Y CO RP O RATIO N Property of LITE-ON Only Temperature Profile of Soldering Reflow (2) When using another soldering method such as infrated ray lamp, the temperature may rise partially in the mold of the device. Keep the temperature on the package of the device within the condition of above (1) RECOMMENDED FOOT PRINT PATTERNS (MOUNT PAD) Unit : mm Part No. : LTV-352T BNS-OD-C131/A4 Page : 9 of 9