LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only FEATURES * High isolation voltage between input and output * High input current (IF : MAX. 150 mA) * Low collector dark current ( ICEO : MAX. 10-7A at VCE = 20V ) * Current transfer ratio ( CTR : 20% ~ 80% at IF = 100mA, VCE = 2V ) * High input-output isolation voltage ( Viso = 5,000Vrms ) * Response time ( tr : TYP. 4µs at VCE = 5V, IC = 2mA, RL = 100Ω ) * Dual-in-line package : LTV-724F * Wide lead spacing package : LTV-724FM * Surface mounting package : LTV-724FS * Tape and reel packaging : LTV-724FS-TA1 * UL approved ( No. E113898 ) * TUV approved ( No. R9653630 ) * CSA approved ( No. CA91533-1 ) * FIMKO approved ( No. 202944 ) * NEMKO approved ( No. P98101738 ) * DEMKO approved ( No. 307923 ) * SEMKO approved ( No. 9833171 / 01 ) * VDE approved ( No. 094722 ) Part No. : LTV-724F ( M, S, -TA1 ) BNS-OD-C131/A4 Page : 1 of 9 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only OUTLINE DIMENSIONS LTV-724F : LTV-724FM : *1. Year date code. *2. 2-digit work week. *3. Factory identification mark shall be marked (Z : Taiwan, Y : Thailand, X : China). Part No. : LTV-724F ( M, S, -TA1 ) BNS-OD-C131/A4 Page : 2 of 9 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only OUTLINE DIMENSIONS LTV-724FS : *1. Year date code. *2. 2-digit work week. *3. Factory identification mark shall be marked (Z : Taiwan, Y : Thailand, X : China). Part No. : LTV-724F ( M, S, -TA1 ) BNS-OD-C131/A4 Page : 3 of 9 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only TAPING DIMENSIONS LTV-724FS-TA1 : Description Tape wide Pitch of sprocket holes Distance of compartment Distance of compartment to compartment Part No. : LTV-724F ( M, S, -TA1 ) BNS-OD-C131/A4 Symbol W P0 F P2 P1 Dimensions in mm ( inches ) 16 ± 0.3 ( .63 ) 4 ± 0.1 ( .15 ) 7.5 ± 0.1 ( .295 ) 2 ± 0.1 ( .079 ) 12 ± 0.1 ( .472 ) Page : 4 of 9 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only ABSOLUTE MAXIMUM RATING ( Ta = 25°C ) PARAMETER SYMBOL RATING UNIT Forward Current IF 150 mA Reverse Voltage VR 6 V Power Dissipation P 230 mW Collector - Emitter Voltage VCEO 35 V Emitter - Collector Voltage VECO 6 V Collector Current IC 80 mA Collector Power Dissipation PC 160 mW Ptot 320 mW Viso 5,000 Vrms Operating Temperature Topr -25 ~ +100 °C Storage Temperature Tstg -55 ~ +125 °C Tsol 260 °C INPUT OUTPUT Total Power Dissipation *1 Isolation Voltage *2 Soldering Temperature *1. AC For 1 Minute, R.H. = 40 ~ 60% Isolation voltage shall be measured using the following method. (1) Short between anode and cathode on the primary side and between collector and emitter on the secondary side. (2) The isolation voltage tester with zero-cross circuit shall be used. (3) The waveform of applied voltage shall be a sine wave. *2. For 10 Seconds Part No. : LTV-724F ( M, S, -TA1 ) BNS-OD-C131/A4 Page : 5 of 9 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only ELECTRICAL - OPTICAL CHARACTERISTICS ( Ta = 25°C ) PARAMETER INPUT OUTPUT VF — 1.4 1.7 V IF=100mA Reverse Current IR — — 10 µA VR=4V Terminal Capacitance Ct — 30 250 pF V=0, f=1KHz Collector Dark Current ICEO — — 10-7 A VCE=20V, IF=0 Collector-Emitter Breakdown Voltage BVCEO 35 — — V IC=0.1mA IF=0 Emitter-Collector Breakdown Voltage BVECO 6 — — V IE=10µA IF=0 IC 20 — 80 mA CTR 20 — 80 % Collector-Emitter Saturation Voltage VCE(sat) — 0.1 0.2 V IF=100mA IC=1mA Isolation Resistance RISO — Ω DC500V 40 ~ 60% R.H. Floating Capacitance Cf — 0.6 1 pF V=0, f=1MHz Cut-Off Frequency fc — 100 — kHz VCE=5V, IC=2mA RL=100Ω, -3dB Response Time (Rise) tr — 4 18 µs Response Time (Fall) tf — 3 18 µs * Current Transfer Ratio * CTR = CONDITIONS Forward Voltage Collector Current TRANSFER CHARACTERISTICS SYMBOL MIN. TYP. MAX. UNIT 5×1010 1×1011 IF=100mA VCE=2V VCE=5V, IC=2mA RL=100Ω IC × 100% IF Part No. : LTV-724F ( M, S, -TA1 ) BNS-OD-C131/A4 Page : 6 of 9 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only CHARACTERISTICS CURVES Fig.1 Forward Current vs. Ambient Temperature Fig.2 Collector Power Dissipation vs. Ambient Temperature 150 100 50 0 -25 200 Collector power dissipation Pc (mW) Forward current I F (mA) 200 0 25 50 75 100 160 150 100 50 0 -25 125 o 75 100 125 100 PC (MAX.) 80 o I F= 100mA 60 50mA 30mA 40 100 C Forward current (mA) Collector current Ic (mA) 50 Fig.4 Forward Current vs. Forward Voltage 100 10mA 20 o o 80 C 40 C o 20 C o 60 C 10 1 0 0 2 4 6 8 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 10 Forward voltage (V) Collector-emitter voltage Vce (V) Fig.6 Collector Dark Current vs. Ambient Temperature Fig.5 Current Transfer Ratio vs. Forward Current 300 VCE= 2V Collector dark current I CEO (nA) Current transfer ratio CTR (%) 25 Ambient temperature Ta ( C) Fig.3 Collector Current vs. Collector-emitter Voltage 250 VCE= 20V 1000 200 150 100 50 0 0.1 100 10 1 1 10 Forward current IF (mA) Part No. : LTV-724F ( M, S, -TA1 ) BNS-OD-C131/A4 0 o Ambient temperature Ta ( C) 100 20 40 60 80 100 O Ambient temperature Ta ( C) Page : 7 of 9 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only CHARACTERISTICS CURVES Fig.7 Response Time vs. Load Resistance 0 VCE= 5V I C= 2mA -1 tf 10.0 tr td ts 1.0 VCE= 5V I C= 2mA -2 Voltage gain Av (dB) Response time ( s) 100.0 Fig.8 Frequency Response 1k -3 100k RL= 10k -4 -5 -6 -7 -8 -9 0.1 0.1 1 -10 10 0 Fig.9 Collector-emitter Voltage vs. Ambient Temperature Vcc Input 8 1000 100 Test Circuit for Response Time 10 Collecotr-emitter voltage VCE (V) 10 Frequency f (kHz) Load resistance RL (k ) RD RL Input Output Output 10% I C= 1mA 90% 5mA 6 ts td tr 4 40mA Test Circuit for Frequency Response Vcc 2 30mA 20mA 10mA 0 tf 0 20 40 60 RD 80 RL Output 100 Forward current I F (mA) Part No. : LTV-724F ( M, S, -TA1 ) BNS-OD-C131/A4 Page : 8 of 9 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only RECOMMENDED FOOT PRINT PATTERNS (MOUNT PAD) Unit : mm Part No. : LTV-724F ( M, S, -TA1 ) BNS-OD-C131/A4 Page : 9 of 9