Marktech RT Angle Dual Stack PCB MT 3mm LEDs Features Diffused lens Stackable end to end Series Line−Up Part Number Color Material MTA1163−GHR Yellow Green GaP MTA1163−GHR High Efficiency Red GaAsP MTA1163−HRG High Efficiency Red GaAsP MTA1163−HRG Yellow Green GaP MTA1163−YG Pure Yellow GaAsP MTA1163−YG Yellow Green GaP MTA2063−G Yellow Green GaP MTA2063−HR High Efficiency Red GaAsP MTA2063−Y Pure Yellow GaAsP Maximum Ratings (Ta=25oC) Part Number Forward Current IF MTA1163−GHR 30 5 85.00 −25 ~ +60 −25 ~ +60 MTA1163−GHR 30 5 85.00 −25 ~ +60 −25 ~ +60 MTA1163−HRG 30 5 85.00 −25 ~ +60 −25 ~ +60 MTA1163−HRG 30 5 85.00 −25 ~ +60 −25 ~ +60 MTA1163−YG 30 5 85.00 −25 ~ +60 −25 ~ +60 MTA1163−YG 30 5 85.00 −25 ~ +60 −25 ~ +60 MTA2063−G 30 5 85.00 −25 ~ +60 −25 ~ +60 MTA2063−HR 30 5 85.00 −25 ~ +60 −25 ~ +60 MTA2063−Y 30 5 85.00 −25 ~ +60 −25 ~ +60 Unit mA Company Headquarters 3 Northway Lane North Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 Reverse Voltage VR V Power Dissipation PD mW Operating Temperature Topr o C Web: www.marktechopto.com | Email: [email protected] Storage Temperature Tstg o C West Coast Sales Office 950 South Coast Drive, Suite 225 Costa Mesa, California 92626 Toll Free: 800.984.5337 Fax: 714.850.9314 Marktech RT Angle Dual Stack PCB MT 3mm LEDs o Electrical and Optical Characteristics (Ta=25 C) Part Number MTA1163−GHR PWL nm λP 567 635 MTA1163−HRG 635 567 MTA1163−YG 585 567 MTA2063−G MTA2063−HR MTA2063−Y − 567 635 585 nm Material View Angle 2θ1/2 o GaP 36 GaAsP GaAsP o 36 o 36 o GaP 36 GaAsP o 36 o GaP 36 o GaP 36 GaAsP GaAsP − o 36 o 36 deg Luminous Intensity Iv min. typ. max. Forward Voltage VF IF@ min. typ. max. Rev Current IR IF@ max. VR@ 5.40 40.00 − 20mA − 2.10 3.00 20mA 100 5V 6.20 35.00 − 20mA − 2.10 3.00 20mA 100 5V 6.20 35.00 − 20mA − 2.10 3.00 20mA 100 5V 5.40 40.00 − 20mA − 2.10 3.00 20mA 100 5V 4.40 25.00 − 20mA − 2.10 3.00 20mA 100 5V 5.40 40.00 − 20mA − 2.10 3.00 20mA 100 5V 5.40 40.00 − 20mA − 2.10 3.00 20mA 100 5V 6.20 35.00 − 20mA − 2.10 3.00 20mA 100 5V 4.40 25.00 − 20mA − 2.10 3.00 20mA 100 5V mcd − V − µA − NOTES: • All Dimensions are in millimeters. • Tolerance is ±0.25mm unless otherwise stated. • An Epoxy Meniscus may extend about 1mm down the leads. • Burr around bottom of epoxy may be around 0.5mm MAX. • Specifications are subject to change without notice. Company Headquarters 3 Northway Lane North Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 Web: www.marktechopto.com | Email: [email protected] West Coast Sales Office 950 South Coast Drive, Suite 225 Costa Mesa, California 92626 Toll Free: 800.984.5337 Fax: 714.850.9314