Surface Mount LED TLOE1005B Features 3.2 (L) x 2.4 (W) x 2.4 (H) mm 2 mm lens top type InGaAlP LED Reflow soldering is possible Standard embossed taping 4 mm pitch : T03 (1000 pcs/reel) Applications High−output backlighting source Battery−powered equipment Message boards Portable devices Computer peripherals o Maximum Ratings (Ta=25 C) Characteristic Symbol Max. Unit Forward Current IF 25 Reverse Voltage VR 4.00 V Power Dissipation PD 60.00 mW Operating Temperature Topr −40 ~ 85 Storage Temperature Tstg −40 ~ 100 Soldering Temperature Tsol Soldering Time − mA o C o C o 260 C for 3 sec. max − o Opto−Electrical Characteristics (Ta=25 C) Characteristic Symbol Test Condition Min Typ Forward Voltage VF IF=20mA − Reverse Current IR VR=4V − Luminous Intensity IV IF=20mA Max Unit 2.00 2.40 − 476.00 1500.00 o V 50 µA − mcd 2θ1/2 − − 45 λp IF=20mA − 612 − nm Dominant Wavelength λd IF=20mA − 605 − nm Spectral Line Half Width ∆λ IF=20mA − 15 − nm Viewing Angle Peak Wavelength Company Headquarters 3 Northway Lane North Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 − deg. Web: www.marktechopto.com | Email: [email protected] California Sales Office: 950 South Coast Drive, Suite 265 Costa Mesa, California 92626 Toll Free: 800.984.5337 Fax: 714.850.9314 Surface Mount LED TLOE1005B Graphs Company Headquarters 3 Northway Lane North Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 Web: www.marktechopto.com | Email: [email protected] California Sales Office: 950 South Coast Drive, Suite 265 Costa Mesa, California 92626 Toll Free: 800.984.5337 Fax: 714.850.9314 Surface Mount LED NOTICE: • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. • In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. • Gallium arsenide (GaAs) is a substance used in the products described in this document. GaAs dust and fumes are toxic. Do not break, cut or pulverize the product, or use chemicals to dissolve them. When disposing of the products, follow the appropriate regulations. Do not dispose of the products with other industrial waste or with domestic garbage. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. • The information contained herein is subject to change without notice. Company Headquarters 3 Northway Lane North Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 Web: www.marktechopto.com | Email: [email protected] California Sales Office: 950 South Coast Drive, Suite 265 Costa Mesa, California 92626 Toll Free: 800.984.5337 Fax: 714.850.9314