Toshiba TLxH262 Series LEDs Features 3.1mm Package InGaAlP Technology All Plastic Mold Type Water Clear Lens Fast Response Time, Capable of Pulse Operation High Power Luminous Intensity Applications Backlight Series Line−Up Part Number Color Material TLOH262 Ultra Bright Orange InGaAlP TLRH262 Ultra Bright Red InGaAlP TLYH262 Ultra Bright Yellow InGaAlP Maximum Ratings (Ta=25oC) Part Number Forward Current IF Reverse Voltage VR Power Dissipation PD Operating Temperature Topr TLOH262 50 4 125.00 −30 ~ 85 −40 ~ 120 TLRH262 50 4 125.00 −30 ~ 85 −40 ~ 120 TLYH262 50 4 125.00 −30 ~ 85 −40 ~ 120 Unit mA V mW Company Headquarters 3 Norhway Lane North Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 o C Web: www.marktechopto.com | Email: [email protected] Storage Temperature Tstg o C West Coast Sales Office 950 South Coast Drive, Suite 265 Costa Mesa, California 92626 Toll Free: 800.984.5337 Fax: 714.850.9314 Toshiba TLxH262 Series LEDs o Electrical and Optical Characteristics (Ta=25 C) Part Number TLOH262 TLRH262 TLYH262 − PWL nm λP 612 644 590 nm Material InGaAlP InGaAlP InGaAlP − View Angle 2θ1/2 o 80 o 80 o 80 deg Luminous Intensity Iv IF@ min. typ. typ. 153.00 450.00 − 20mA − 2.10 2.50 20mA 50 4V 85.00 220.00 − 20mA − 1.90 2.50 20mA 50 4V 85.00 280.00 − 20mA − 2.10 2.50 20mA 50 4V − V max. Rev Current IR min. mcd max. Forward Voltage VF IF@ − max. µA VR@ − Precautions • Soldering temperature: 260°C max, soldering time: 3 s max (soldering portion of lead: up to 2 mm from the body of the device). • If the lead is formed, the lead should be formed up to 5 mm from the body of the device without forming stress to the resin. Soldering should be performed after lead forming. • This visible LED lamp also emits some IR light. If a photodetector is located near the LED lamp, please ensure that it will not be affected by this IR light. NOTICE: • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. • In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. • Gallium arsenide (GaAs) is a substance used in the products described in this document. GaAs dust and fumes are toxic. Do not break, cut or pulverize the product, or use chemicals to dissolve them. When disposing of the products, follow the appropriate regulations. Do not dispose of the products with other industrial waste or with domestic garbage. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. • The information contained herein is subject to change without notice. Company Headquarters 3 Norhway Lane North Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 Web: www.marktechopto.com | Email: [email protected] West Coast Sales Office 950 South Coast Drive, Suite 265 Costa Mesa, California 92626 Toll Free: 800.984.5337 Fax: 714.850.9314 Toshiba TLxH262 Series LEDs TLOH262 Graphs Company Headquarters 3 Norhway Lane North Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 Web: www.marktechopto.com | Email: [email protected] West Coast Sales Office 950 South Coast Drive, Suite 265 Costa Mesa, California 92626 Toll Free: 800.984.5337 Fax: 714.850.9314 Toshiba TLxH262 Series LEDs TLRH262 Graphs Company Headquarters 3 Norhway Lane North Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 Web: www.marktechopto.com | Email: [email protected] West Coast Sales Office 950 South Coast Drive, Suite 265 Costa Mesa, California 92626 Toll Free: 800.984.5337 Fax: 714.850.9314 Toshiba TLxH262 Series LEDs TLYH262 Graphs Company Headquarters 3 Norhway Lane North Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 Web: www.marktechopto.com | Email: [email protected] West Coast Sales Office 950 South Coast Drive, Suite 265 Costa Mesa, California 92626 Toll Free: 800.984.5337 Fax: 714.850.9314