R T- 5 0 50W Triple Output Switching Power Supply series Features : Universal AC input / Full range Protections: Short circuit / Overload / Over voltage Cooling by free air convection LED indicator for power on 100% full load burn-in test All using 105 long life electrolytic capacitors Withstand 300VAC surge input for 5 second High operating temperature up to 70 Withstand 5G vibration test High efficiency, long life and high reliability 3 years warranty SPECIFICATION MODEL RT-50A RT-50B RT-50C RT-50D OUTPUT NUMBER CH1 CH2 CH3 CH1 CH2 CH3 CH1 CH2 CH3 CH1 CH2 DC VOLTAGE 5V 12V -5V 5V 12V -12V 5V 15V -15V 5V 24V 12V RATED CURRENT 4A 2A 0.5A 4A 2A 0.5A 4A 1.5A 0.5A 3A 1A 1A CURRENT RANGE 0.5 ~ 5A 0.2 ~ 2.5A 0.1 ~ 1A 0.5 ~ 5A 0.2 ~ 2.5A 0.1 ~ 1A 0.5 ~ 5A 0.2 ~ 2A 0.1 ~ 1A 0.5 ~ 5A 0.2 ~ 1.5A 0.1 ~ 1A RATED POWER 46.5W 50W 50W CH3 51W RIPPLE & NOISE (max.) Note.2 80mVp-p 120mVp-p 100mVp-p 80mVp-p 120mVp-p 120mVp-p 80mVp-p 120mVp-p 120mVp-p 80mVp-p 150mVp-p 120mVp-p OUTPUT VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.3 INPUT CH1: 4.75 ~ 5.5V 2.0% 6.0% 2.0% CH1: 4.75 ~ 5.5V 2.0% 6.0% 2.0% CH1: 4.75 ~ 5.5V 2.0% +8,-4% 2.0% CH1: 4.75 ~ 5.5V 2.0% + 8,-4% 6.0% LINE REGULATION Note.4 0.5% 1.5% 0.5% 0.5% 1.5% 0.5% 0.5% 1.5% 0.5% 0.5% 2.0% 2.0% LOAD REGULATION Note.5 1.0% 3.0% 1.0% 1.0% 3.0% 1.0% 1.0% 3.0% 1.0% 1.0% 3.0% 4.0% SETUP, RISE TIME 500ms, 20ms/230VAC 1200ms, 30ms/115VAC at full load HOLD UP TIME (Typ.) 60ms/230VAC VOLTAGE RANGE 88 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 77% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.3A/115VAC 0.8A/230VAC COLD START 36A/230VAC LEAKAGE CURRENT <2mA / 240VAC 10ms/115VAC at full load 125 ~ 373VDC (Withstand 300VAC surge for 5sec. Without damage) 77% 78% 80% 110 ~ 150% rated output power OVERLOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE Protection type : Hiccup mode, recovers automatically after fault condition is removed CH1: 5.75 ~ 6.75V Protection type : Hiccup mode, recovers automatically after fault condition is removed -25 ~ +70 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 )on +5V output 10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 EMC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B / 70% RH (Note 6) HARMONIC CURRENT EMS IMMUNITY MTBF OTHERS DIMENSION PACKING NOTE Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61000-6-2 (EN50082-2), heavy industry level, criteria A 169.2Khrs min. MIL-HDBK-217F (25 99*97*36mm (L*W*H) 0.41Kg; 45pcs/19.5Kg/0.9CUFT ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com) File Name:RT-50-SPEC 2010-10-18 R T- 5 0 50W Triple Output Switching Power Supply Mechanical Specification Case No. 905B 51.5 3.5 8.25 2 3 4 5.5 3 97 5 55.5 2- M 6 7 Unit:mm 36 1 series 7 8 20.5 55 3.5 4.5 89 99 6.5 87 3.5 74 18 Pin No. 1 2 3 4 36 -M3 28 2 17.5 7 Terminal Pin No. Assignment 3.5 Block Diagram RECTIFIERS & FILTER EMI FILTER I/P POWER SWITCHING Pin No. 5 6 7 8 Assignment DC OUTPUT V3 DC OUTPUT +V2 DC OUTPUT COM DC OUTPUT +V1 RECTIFIERS & FILTER V3 RECTIFIERS & FILTER +V2 RECTIFIERS & FILTER +V1 COM fosc : 60KHz DETECTION CIRCUIT FG O.L.P. Assignment AC/L AC/N FG NC CONTROL O.V.P. Derating Curve Output Derating VS Input Voltage Ta=25 100 100 90 80 80 70 LOAD (%) LOAD (%) 60 40 20 -25 -25 0 0 10 20 30 40 50 AMBIENT TEMPERATURE ( ) 60 70 (VERTICAL) 60 50 40 88 95 100 115 120 140 160 180 200 220 240 264 INPUT VOLTAGE (VAC) 60Hz File Name:RT-50-SPEC 2010-10-18