MEANWELL SP-500-27

SP-500
500W Single Output with PFC Function
series
Features :
Universal AC input / Full range
Built-in active PFC function, PF>0.95
Protections: Short circuit / Overload/ Over voltage / Over temperature
Forced air cooling by built-in DC fan
Built-in cooling Fan ON-OFF control
Built-in remote ON-OFF control
Built-in remote sense function
3 years warranty
( for 24V only)
SPECIFICATION
MODEL
OUTPUT
SP-500-12
SP-500-13.5
SP-500-15
SP-500-24
SP-500-27
DC VOLTAGE
12V
13.5V
15V
24V
27V
48V
RATED CURRENT
40A
36A
32A
20A
18A
10A
CURRENT RANGE
0 ~ 40A
0 ~ 36A
0 ~ 32A
0 ~ 20A
0 ~ 18A
0 ~ 10A
RATED POWER
480W
486W
480W
480W
486W
480W
RIPPLE & NOISE (max.) Note.2 240mVp-p
240mVp-p
240mVp-p
240mVp-p
200mVp-p
300mVp-p
VOLTAGE ADJ. RANGE
12 ~ 15V
1.0%
13.5 ~ 18V
1.0%
20 ~ 26.4V
1.0%
24 ~ 30V
1.0%
41 ~ 56V
1.0%
10 ~ 13.2V
VOLTAGE TOLERANCE Note.3 1.0%
LINE REGULATION
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
LOAD REGULATION
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
85.5%
86.5%
1500ms, 50ms at full load
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE
INPUT
PROTECTION
FUNCTION
24ms at full load
Note.5 88 ~ 264VAC
47 ~ 63Hz
POWER FACTOR (Typ.)
PF>0.95/230VAC
EFFICIENCY(Typ.)
84%
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
7A/115VAC
18A/115VAC
PF>0.95/115VAC at full load
84%
83%
<3.5mA/240VAC
OVERLOAD
105 ~ 135% rated output power
Protection type : Constant current limiting, recovers automatically after fault condition is removed
OVER VOLTAGE
13.8 ~ 16.2V
15.5 ~ 18.2V
18 ~ 21V
27.6 ~ 32.4V
Protection type : Hiccup mode, recovers automatically after fault condition is removed
FAN CONTROL, O.T.P.
RTH1 or RTH2
REMOTE CONTROL
RC+/RC-: Short = power on ; Open = power off
-10 ~ +50 (Refer to "Derating Curve")
20 ~ 90% RH non-condensing
SAFETY STANDARDS
SAFETY & WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC
(Note 4)
EMC EMISSION
EMC IMMUNITY
MTBF
DIMENSION
PACKING
-20 ~ +85
87%
3.5A/230VAC
36A/230VAC
LEAKAGE CURRENT
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
NOTE
124 ~ 370VDC
FREQUENCY RANGE
WORKING TEMP.
OTHERS
SP-500-48
50
FAN ON,
45
FAN OFF,
70
31 ~ 36.5V
57.6 ~ 67.2V
output shutdown
, 10 ~ 95% RH
0.03%/ (0 ~ 50 )
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
UL60950-1, TUV EN60950-1, CCC GB4943( for 24V only) approved
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25
/ 70% RH
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A
133.4K hrs min. MIL-HDBK-217F (25
170*120*93mm (L*W*H)
1.9Kg; 8pcs/15.5Kg/1.06CUFT
)
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”
(as available on http://www.meanwell.com)
5. Derating may be needed under low input voltages. Please check the derating curve for more details.
File Name:SP-500-SPEC 2011-11-15
SP-500
500W Single Output with PFC Function
Mechanical Specification
Unit:mm
58.3
Case No. 910
series
100
Air flow
direction
2-M3 L=16mm max.
2-M3 L=4mm max.
150
170
120
1
2
3
4
5
L
N
FG
NC
NC R.C.G R.C.
6
150
14 max.
11.5
8
7
Terminal Pin No. Assignment
+S
2-M3 L=4mm max.
BAUART
GEPRUFT
TUV
Rheinland
Product Safety
TYPE
APPROVED
E183223
LEVEL5
2-M3 L=16mm max.
50
(AC )
INPUT
100-240VAC
7A
50/60Hz
SP-500-12
MADE IN TAIWAN
+12V 40A
-V
-S
+V ADJ.
8
9
10 11 12 13 14 15
9.5
93
SHORT:ON
OPEN:OFF
Pin No. Assignment
1
AC/L
2
AC/N
3
FG
4,5
NC
6
R.C.G
Pin No.
7
8
9~11
12~14
15
Assignment
R.C.
+S
DC OUTPUT +V
DC OUTPUT -V
-S
11.5
FAN
ON/OFF
CONTROL
Block Diagram
ACTIVE
INRUSH
CURRENT
LIMITING
EMI
FILTER
I/P
RECTIFIERS
&
P.F.C.
FAN
PFC fosc : 100KHz
PWM fosc : 67KHz
RECTIFIERS
&
FILTER
POWER
SWITCHING
+V
-V
RC. G.
O.C.P.
FG
O.L.P.
RC
DETECTION
CIRCUIT
PWM
CONTROL
O.V.P.
O.T.P.
Derating Curve
Output Derating VS Input Voltage
100
100
90
80
80
70
LOAD(%)
LOAD (%)
60
40
20
-10
0
10
20
30
40
45
AMBIENT TEMPERATURE ( )
50 (HORIZONTAL)
60
50
40
88
115
135
155
230
264
INPUT VOLTAGE (V) 60Hz
File Name:SP-500-SPEC 2011-11-15