SP-150 150W Single Output with PFC Function series Features : Universal AC input / Full range Built-in active PFC function, PF>0.93 Protections: Short circuit / Overload / Over voltage / Over temperature Built-in constant current limiting circuit Remote ON-OFF control(Optional) LED indicator for power on 100% full load burn-in test Fixed switching frequency at PFC:67KHz PWM:134KHz 3 years warranty SPECIFICATION MODEL SP-150-3.3 SP-150-5 SP-150-7.5 SP-150-12 SP-150-13.5 SP-150-15 SP-150-24 SP-150-27 SP-150-48 DC VOLTAGE 3.3V 5V 7.5V 12V 13.5V 15V 24V 27V 48V RATED CURRENT 30A 30A 20A 12.5A 11.2A 10A 6.3A 5.6A 3.2A CURRENT RANGE 0 ~ 30A 0 ~ 30A 0 ~ 20A 0 ~ 12.5A 0 ~ 11.2A 0 ~ 10A 0 ~ 6.3A 0 ~ 5.6A 0 ~ 3.2A RATED POWER 99W 150W 150W 150W 151.2W 150W 150W 151.2W 153.6W 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 150mVp-p 150mVp-p 250mVp-p RIPPLE & NOISE (max.) Note.2 100mVp-p OUTPUT 3.14 ~ 3.63V 4.75 ~ 5.5V VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.3 2.0% 2.0% 2.0% 2.0% 2.0% 2.0% 1.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 1.0% 1.0% 1.0% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 600ms, 30ms at full load SETUP, RISE TIME 20ms at full load HOLD UP TIME (Typ.) VOLTAGE RANGE INPUT Note.5 85 ~ 264VAC 120 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.93/230VAC EFFICIENCY (Typ.) 67% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 2.5A/115VAC 1.2A/230VAC COLD START 40A/230VAC LEAKAGE CURRENT <2mA / 240VAC OVERLOAD 105 ~ 150% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed 3.63 ~ 4.46V 5.5 ~ 6.75V 8.25 ~ 10.13V 13.2 ~ 16.2V 14.85 ~ 18.2V 16.5 ~ 20.25V 26.4 ~ 32.4V 29.7 ~ 36.45V 52.8 ~ 64.8V PROTECTION OVER VOLTAGE FUNCTION 7.13 ~ 8.25V 11.4 ~ 13.2V 12.8 ~ 14.9V 14.3 ~ 16.5V 22.8 ~ 26.4V 25.7 ~ 29.7V 45.6 ~ 52.8V PF>0.98/115VAC at full load 75% 79% 80% 80% 84% 84% Protection type : Shut down o/p voltage, re-power on to recover -20 ~ +85 SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMC EMI CONDUCTION & RADIATION (Note 4) HARMONIC CURRENT UL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC EMS IMMUNITY MTBF NOTE 83% 95 5 (TSW1 : detect on heatsink of power transistor) OVER TEMPERATURE Protection type : Shut down o/p voltage, recovers automatically after temperature goes down REMOTE CONTROL(OPTION) CN1:4 ~ 10VDC POWER ON, <0 ~ 0.8VDC POWER OFF -10 ~ +60 (Refer to output load derating curve) WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION OTHERS 81% , 10 ~ 95% RH 0.05%/ (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55022 (CISPR22) Class B Compliance to EN61000-3-2,-3 DIMENSION Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A 191.2K hrs min. MIL-HDBK-217F (25 ) 199*99*50mm (L*W*H) PACKING 0.76Kg; 20pcs/16.4Kg/1.28CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com) 5. Derating may be needed under low input voltages. Please check the derating curve for more details. File Name:SP-150-SPEC 2010-10-18 SP-150 150W Single Output with PFC Function Mechanical Specification Case No. 916A series Unit:mm 199 20 35 133 25 117 70 65 CN1 1 2 R.C. +V ADJ. 99 16 10 49.5 119 79 2-M4 L=5mm 5-M3 L=3mm 38 8 9.5 7 6 5 4 3 2 1 51 LED Terminal Pin No. Assignment 15 Assignment AC/L AC/N FG Pin No. 1 2 3 142 25 11 max. Assignment DC OUTPUT -V DC OUTPUT +V Pin No. 4,5 6,7 50 Pin No. 1 2 12.5 25 25 Remote ON/OFF(CN1):JST S2B-XH or equivalent(optional) Assignment RC+ RC- Mating Housing Terminal JST XHP or equivalent JST SXH-001T-P0.6 or equivalent 6-M4 L=6mm PFC fosc : 67KHz PWM fosc : 134KHz Block Diagram EMI FILTER & RECTIFIERS I/P PFC CIRCUIT FG RECTIFIERS & FILTER POWER SWITCHING O.L.P. ACTIVE START CIRCUIT +V -V CONSTANT CURRENT LIMITING & DETECTION CIRCUIT PWM & PFC CONTROL O.V.P. O.T.P. Derating Curve REMOTE CONTROL CN1 Output Derating VS Input Voltage Ta=25 SP-150-12~48 SP-150-3.3~7.5 (With 18CFM FAN) 100 100 90 80 80 70 SP-150-3.3 SP-150-5 SP-150-7.5 40 LOAD (%) LOAD (%) 60 20 -10 -10 0 0 10 10 20 20 30 35 40 45 45 50 AMBIENT TEMPERATURE ( ) 50 (HORIZONTAL) 55 (VERTICAL) 60 50 40 85 100 115 135 155 230 264 INPUT VOLTAGE (VAC) 60Hz File Name:SP-150-SPEC 2010-10-18