Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 8805285104 Item: BE05-2A85-PHI Coil Data at 20 °C Conditions Min Typ Conditions Min Typ Max Unit Max Unit Coil resistance Coil voltage Rated power Thermal Resistance Pull-In voltage Drop-Out voltage Contact Data 85 Contact-form Contact rating Switching voltage Switching current Carry current Contact resistance static Insulation resistance Breakdown voltage (30-40 AT) Operate time incl. bounce Release time Capacity Special Product Data Insulation resistance Coil/Contact Insulation voltage Coil/Contact Housing material Sealing compound Connection pins Number of contacts Environmental data Shock Vibration Ambient temperature A-NO not to exceed their individual max.'s DC or Peak AC DC or Peak AC ! " 100% Duty Cycle Measured with 40% overdrive RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation # $ $ %& Conditions Min RH <45%, 200 VDC Messspannung gemäß IEC 255-5 Typ Max Polycarbonat Epoxy Resin Copper alloy tin plated 2 Conditions Min Typ 1/2 sine wave duration 11ms from 10 - 2000 Hz Max Unit ' " Unit ( ( ) * Modifications in the sense of technical progress are reserved Designed at: Last Change at: 18.11.08 Designed by: Last Change by: WKOVACS Approval at: Approval at: 20.11.08 Approval by: Approval by: KOLBRICH Version: 01 Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 8805285104 Item: BE05-2A85-PHI Environmental data Storage temperature Soldering temperature Cleaning Conditions Min Typ *+ Wellenlöten max. 5 sec Max Unit ) ) fully sealed Modifications in the sense of technical progress are reserved Designed at: Last Change at: 18.11.08 Designed by: Last Change by: WKOVACS Approval at: Approval at: 20.11.08 Approval by: Approval by: KOLBRICH Version: 01