Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 8424183104 Item: HM24-1A83-10-4 Coil Data at 20 °C Conditions Min Typ Max Unit Conditions Min Typ Max Unit Coil resistance Coil voltage Rated power Thermal Resistance Pull-In voltage Drop-Out voltage Contact data 83 Contact-No. Contact-form Contact-material Contact rating Switching voltage Switching current Carry current Contact resistance static Insulation resistance Breakdown voltage Release time Operate time incl. bounce Capacitance Special Product Data Insulation resistance Coil/Contact Dielectric Strength Coil/Contact Housing material Sealing compound Connection pins Number of contacts 83 A - NO Tungsten not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC measured with nominal voltage at 20°C RH <45 %, 100 V test voltage according to IEC 255-5 measured with no coil excitation measured with nominal voltage at 20°C @ 10 kHz across open switch Conditions ! # # Min Typ " " $% Max RH <45%, 200 VDC test voltage according to IEC 255-5 Unit ! & Polycarbonat Polyurethan cu-alloy tinned 1 Modifications in the sense of technical progress are reserved Designed at: 19.04.04 Designed by: EBUNKE Approval at: Last Change at: 16.01.09 Last Change by: WKOVACS Approval at: 26.01.09 Approval by: Approval by: KOLBRICH Version: 02 Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 8424183104 Item: HM24-1A83-10-4 Environmental data Shock Vibration Operating temperature Storage temperature Soldering temperature Washability Conditions Min Typ 1/2 sine wave duration 11ms from 10 - 2000 Hz Unit ' ' ( ( ( ) ) wave sodering max. 5 sec. Max fully sealed Modifications in the sense of technical progress are reserved Designed at: 19.04.04 Designed by: EBUNKE Approval at: Last Change at: 16.01.09 Last Change by: WKOVACS Approval at: 26.01.09 Approval by: Approval by: KOLBRICH Version: 02