Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 2116631015 Item: KSK-1A66/3-1015 Magnetic properties Conditions Min Typ Pull-In excitation (Reference value) measured in coil- "define operation" Test-Coil Reed switch unmodified Contact-No. Contact-form Contact-material Contact rating Switching voltage Switching current Carry current Contact resistance static Contact resistance dynamic Insulation resistance Breakdown voltage ( < 20 AT ) Insulation resistance Release time Capacity Contact dimensions Overall length Glass body length Min Shock Vibration Operating temperature Storage temperature Soldering temperature Typ Max Unit 66/3 A Iridium not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC ! " # $ ! !$ Start Value % $ & ! % Start Value RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch ' ( + Conditions Min Tolerance according to drawing Tolerance according to drawing Environmental data Unit KMS-01 Conditions Contact data 66/3 Max Typ )* Max Unit Max Unit "" + " Conditions Min Typ 1/2 sine wave duration 11ms from 10 - 2000 Hz ." . wave soldering max. 5 sec. + + / , , - Modifications in the sense of technical progress are reserved Designed at: Last Change at: 07.05.09 Designed by: Last Change by: AKELLER Approval at: Approval at: 11.05.09 Approval by: Approval by: RKAMP Version: 01