Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 9233292530 Item: MK23-90-E-1 Magnetic properties Conditions Min Typ Pull-In excitation (Reference value) measured in coil- "define operation" Test-Coil Reed switch unmodified Pull-In excitation (modified contact) phys. conditioned tolerance of +/- 1 AT Test-Coil Reed switch modified Pull-In in milliTesla (modified conta phys. caused tolerance +/- 0,1mT Contact-No. Contact-form Contact-material Contact rating Switching voltage Switching current Carry current Contact resistance static Contact resistance dynamic Insulation resistance Breakdown voltage Operate time, incl. bounce Release time Capacity Modified dimensions Unit Max Unit KMS-01 KMS-21 Conditions Contact data 90 Max Min Typ 90 C Rhodium ! " #$ not to exceed their individual max.'s DC or Peak AC/ with 40% overdrive DC or Peak AC/with 40% overdrive DC or Peak AC/ with 40% overdrive " & ' ( ) & &) Start Value "* )"+ " & * Start Value # % " % ,% # RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch -. Conditions Min Remarks Typ Max Unit to dimensions see drawing Environmental data Shock Vibration Ambient temperature Storage temperature Soldering temperature Conditions Min Typ Max 1/2 sine wave duration 11ms from 10 - 2000 Hz ' wave soldering max. 5 sec. 1 Unit / / 0 0 0 Modifications in the sense of technical progress are reserved Designed at: Last Change at: 03.07.09 Designed by: Last Change by: AKELLER Approval at: Approval at: 24.08.09 Approval by: Approval by: RKAMP Version: 01