Europe: +49 / 7731 8399 0 | Email: [email protected] USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] Magnetic properties Pull in Test equipment Item No.: 2242711034 Item: MK04-1A66B-300W Conditions Min Typ at 20°C Special Product Data Contact - form Contact rating operating voltage operating ampere Switching current Sensor-resistance Housing material Case color Sealing compound Max Unit KMS-14+SA002+PK002 Conditions Min Typ Max Unit A - NO not to exceed their individual max.'s DC or Peack AC DC or Peack AC DC or Peack AC measured with 40% overdrive PBT glass fibre reinforced white Polyurethan Environmental data Conditions Operating temperature Operating temperature Storage temperature cable not moved cable moved Cable specification Conditions Min Typ Max Unit Min Typ Max Unit Max Unit Cable typ Cable material Cross section [mm²] flat cable PVC 0,14 Conditions General data Mounting advice mounting advice 1 mounting advice 2 customer / customer number tightening torque Min Typ over 5m cable, a series resistor is recommended. Decreased switching distances by mounting on iron Magnetically conductive screws must not be used ! "#$ % &! Disk ISO 7089 Modifications in the sense of technical progress are reserved Designed at: 18.07.06 Designed by: ALICHTENSTEIN Approval at: 24.09.07 Approval by: BUELTZHOEFFER Last Change at: 14.05.08 Last Change by: EKWOK Approval at: 17.06.08 Approval by: TFRITSCHI Version: 03