Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 2243903504 Item: MK04-1C90C-5000W Magnetic properties Pull-In Test equipment Conditions Min Typ at 20°C Special Product Data Contact - form Contact rating Switching voltage Switching current Carry current Sensor-resistance Housing material Case colour Sealing compound Max Unit Max Unit MS- Conditions Min Typ not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC measured with 40% overdrive Polyurethan Environmental data Conditions Operating temperature Operating temperature Storage temperature cable not moved cable moved Cable specification Conditions Min Typ Max Unit Min Typ Max Unit Min Typ Max Unit ! ! ! Cable type Cable material Cross section Conditions General data Mounting advice Mounting advice Mounting advice Tightening torque over 5m cable, a series resistor is recommended. Decreased switching distances by mounting on iron. Magnetically conductive screws must not be used. " # $%& ' (# Disk ISO 7089 Modifications in the sense of technical progress are reserved Designed at: 02.02.06 Designed by: W. KOVACS Approval at: 02.02.06 Approval by: THEO FRITSCHI Last Change at: 17.03.08 Last Change by: ALICHTENSTEIN Approval at: 25.08.08 Approval by: BUELTZHOEFFER Version: 04