Europe: +49 / 7731 8399 0 | Email: [email protected] USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] Item No.: 9272661054 Item: MK27-1A66B-500W Modifications in the sense of technical progress are reserved Designed at: 06.12.10 Designed by: WKOVACS Approval at: 30.05.11 Approval by: DKUECHLER Last Change at: 26.10.11 Last Change by: WKOVACS Approval at: 27.10.11 Approval by: DKUECHLER Version: 02 Europe: +49 / 7731 8399 0 | Email: [email protected] USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] Magnetic properties Pull in Test equipment Item No.: 9272661054 Item: MK27-1A66B-500W Conditions Min at 20°C Special Product Data Contact - No. Contact - form Contact rating operating voltage operating ampere Switching current Sensor-resistance Housing material Sealing compound Typ Max Unit KMS-38 + PH 053 Conditions Min Typ Max Unit 66 A - NO not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC measured with 40% overdrive Aluminium Polyurethan Environmental data Conditions Operating temperature Operating temperature Storage temperature cable not moved cable moved Cable specification Conditions Min Typ Max Unit Min Typ Max Unit Max Unit Cable typ Cable material Cross section [mm²] round cable PVC AWG 24 Conditions General data Min Mounting advice mounting advice 1 mounting advice 2 Typ over 5m cable, a series resistor is recommended. Decreased switching distances by mounting on iron Magnetically conductive screws must not be used Modifications in the sense of technical progress are reserved Designed at: 06.12.10 Designed by: WKOVACS Approval at: 30.05.11 Approval by: DKUECHLER Last Change at: 26.10.11 Last Change by: WKOVACS Approval at: 27.10.11 Approval by: DKUECHLER Version: 02