Europe: +49 / 7731 8399 0 | Email: [email protected] USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] Item No.: 2220903104 Item: MK02/0-1C90-1000W Modifications in the sense of technical progress are reserved Designed at: Last Change at: 07.06.11 Designed by: Last Change by: WKOVACS Approval at: Approval at: 08.06.11 Approval by: Approval by: DKUECHLER Version: 01 Europe: +49 / 7731 8399 0 | Email: [email protected] USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] Magnetic properties Pull in Drop out Test equipment Item No.: 2220903104 Item: MK02/0-1C90-1000W Conditions Min Typ Max Unit Max Unit at 20°C at 20°C Special Product Data Contact - form Contact rating operating voltage operating ampere Switching current Sensor-resistance Housing material Case color Sealing compound SV 002 Conditions Min Typ Form C - Changeover not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC measured with 40% overdrive ! " PBT glass fibre reinforced blue Polyurethan Environmental data Conditions Operating temperature Operating temperature Storage temperature cable not moved cable moved Cable specification Conditions Min Typ Max $ $ $ Unit # # # Min Cable typ Cable material Cross section Typ Max Unit Max Unit round cable PVC 0,14 qmm Conditions General data Mounting advice Mounting advice Mounting advice tightening torque & ' ( )&" Disk ISO 7089 Min Typ over 5m cable, a series resistor is recommended. Decreased switching distances by mounting on iron. Magnetically conductive screws must not be used. % ! Modifications in the sense of technical progress are reserved Designed at: Last Change at: 07.06.11 Designed by: Last Change by: WKOVACS Approval at: Approval at: 08.06.11 Approval by: Approval by: DKUECHLER Version: 01