Europe: +49 / 7731 8399 0 | Email: [email protected] USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] Item No.: 8712271200 Item: MRX12-2A71 Conditions Coil Data at 20 °C Coil resistance Inductance Coil voltage Rated power Thermal resistance Pull-In voltage Drop-Out voltage = Special Product Data Contact-form Contact rating Switching voltage Switching current Carry current Contact resistance static Insulation resistance Breakdown voltage Operate time incl. bounce Release time Capacitance Environmental data Insulation resistance Coil/Contact Insulation voltage Coil/Contact Shock Vibration Ambient temperature Storage temperature Soldering temperature Cleaning Housing material Sealing compound Remarks Remarks Remarks Min Typ Min Typ Max Unit Max Unit operating temperature + self heating Conditions A ! "# #! !$ % not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC &' ( ) * +# Start Value ' , - !. * #. RH <45 %, 200 V test voltage / 0 measured with 40% overdrive measured with no coil excitation @ 10 kHz above open contact &' & ) ) 1 &0 Conditions Min RH <45%, 200 VDC test voltage according to IEC 255-5 1/2 sine wave duration 11ms from 10 - 2000 Hz Typ Max &' ' 5 5, wave soldering max. 5 sec. Unit / 2 ' ' 3 3 4 4 4 fully sealed Plastics / Polyamid Polyurethan Reed-Relay to be used for the galvanic separation intrinsically safe and non-intrinsically safe circuits with Ex-approval by PTB 01 ATEX 2050 U. Modifications in the sense of technical progress are reserved Designed at: 17.01.08 Designed by: WKOVACS Approval at: 28.01.08 Approval by: KOLBRICH Last Change at: 26.06.08 Last Change by: ALICHTENSTEIN Approval at: 26.06.08 Approval by: KOLBRICH Version: 02