Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 3312175171 Item: SIL12-1A75-71D Conditions Coil Data at 20 °C Coil resistance Coil voltage Rated power Pull-In voltage Thermal resistance Drop-Out voltage = Contact-form Contact-material Contact rating Switching voltage (<31 AT) Switching current Carry current Contact resistance static Insulation resistance Breakdown voltage (<20 AT) Operate time incl. bounce Release time Special Product Data Insulation resistance Coil/Contact Insulation voltage Coil/Contact Housing material Connection pins Environmental data Shock Vibration Ambient temperature Storage temperature Soldering temperature Cleaning Typ Max Unit Min Typ Max Unit operating temperature + self heating Conditions Contact data 75 Min A Rhodium !" " # $ not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC & ' ( )" Start Value % % * + ( "+ RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation , % Conditions Min RH <45%, 200 VDC test voltage according to IEC 255-5 Typ ' ' Max Unit , . % epoxy resin FeNi alloy tin plated Conditions Min Typ 1/2 sine wave duration 11ms from 10 - 2000 Hz Max % 2 23% wave soldering max. 5 sec 1 fully sealed % - Unit / / 0 0 0 Modifications in the sense of technical progress are reserved Designed at: 07.08.06 Designed by: KMUELLER Approval at: Last Change at: 07.08.06 Last Change by: KMUELLER Approval at: 31.10.08 Approval by: Approval by: KOLBRICH Version: V1.0