Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 3303172271 Item: SIL03-1A72-71M Conditions Coil Data at 20 °C Coil resistance Coil voltage Rated power Coil current Thermal resistance Inductance Pull-In voltage Drop-Out voltage = Contact rating Switching voltage Switching current Carry current Contact resistance static Insulation resistance Breakdown voltage Operate time incl. bounce Release time Capacity Special Product Data Dielectric Strength Coil/Contact Insulation resistance Coil/Contact Capacity Coil/Contact Housing material Connection pins Magnetic Shield Approval Reach / RoHS conformity Typ Max Unit Min Typ Max Unit operating temperature + self heating Conditions Contact data 66/3 Min ! "# $%! %#! #& ' not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC ( ) * +% Start Value , #- * %- RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch . / Conditions Min according to EN 60255-5 RH <45%, 200 VDC measuring voltage @ 10 kHz Typ ) ) 0 Max Unit 1 . / 0 epoxy resin FeNi42, tin plated yes UL-File No. NRNT2.E156887 / NRNT8.E156887 yes Modifications in the sense of technical progress are reserved Designed at: 08.03.10 Designed by: KSTOPPEL Approval at: 01.04.10 Approval by: KOLBRICH Last Change at: 22.09.11 Last Change by: THAUKE Approval at: 22.09.11 Approval by: CRUF Version: 3 Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 3303172271 Item: SIL03-1A72-71M Environmental data Shock Vibration Operating temperature Storage temperature Soldering temperature Washability Conditions Min 4 4 wave soldering max. 5 sec. Max / 5 Unit 2 2 3 3 3 fully sealed Conditions General data Typ 1/2 sine, duration 11ms, in 3 axis from 10 - 2000 Hz Min Total weigth Packaging Typ Max tube per 25 pcs. Unit 2 Modifications in the sense of technical progress are reserved Designed at: 08.03.10 Designed by: KSTOPPEL Approval at: 01.04.10 Approval by: KOLBRICH Last Change at: 22.09.11 Last Change by: THAUKE Approval at: 22.09.11 Approval by: CRUF Version: 3