Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 3312190371 Item: SIL12-1B90-71Q Conditions Coil Data at 20 °C Coil resistance Coil voltage Rated power Coil current Thermal resistance Inductance Pull-In voltage Drop-Out voltage = Contact rating Switching voltage Switching current Carry current Contact resistance static Insulation resistance Breakdown voltage (<21 AT) Operate time incl. bounce Release time Capacity Special Product Data Dielectric Strength Coil/Contact Insulation resistance Coil/Contact Capacity Coil/Contact Housing material Connection pins Magnetic Shield Approval Reach / RoHS conformity Typ Max Unit Min Typ Max Unit operating temperature + self heating Conditions Contact Data 94 Min ! "# #! !$ % not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC ' ( ) *# Start Value & & + !, ) #, RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch & ( ( . & Conditions Min according to EN 60255-5 RH <45%, 200 VDC measuring voltage @ 10 kHz Typ & Max Unit / - 0 . epoxy resin CuFe2P, tin plated yes UL-File No. NRNT2.E156887 / NRNT8.E156887 yes Modifications in the sense of technical progress are reserved Designed at: 30.03.10 Designed by: THAUKE Approval at: 31.03.10 Approval by: KOLBRICH Last Change at: 30.09.11 Last Change by: THAUKE Approval at: 30.09.11 Approval by: CRUF Version: 2 Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 3312190371 Item: SIL12-1B90-71Q Environmental data Shock Vibration Operating temperature Storage temperature Soldering temperature Washability Conditions Min Max & 3 34& wave soldering max. 5 sec. 0 & 5 Unit 1 1 2 2 2 fully sealed Conditions General data Typ 1/2 sine, duration 11ms, in 3 axis from 10 - 2000 Hz Min Total weigth Packaging Typ Max tube per 25 pcs. Unit 1 Modifications in the sense of technical progress are reserved Designed at: 30.03.10 Designed by: THAUKE Approval at: 31.03.10 Approval by: KOLBRICH Last Change at: 30.09.11 Last Change by: THAUKE Approval at: 30.09.11 Approval by: CRUF Version: 2