PASSIVE SIGNAL AMPLIFIER Iin & Iout T1100L DESCRIPTION PRODUCT PROGRAM T1100 series, a standard analog amplifier, with anterior circuit 4-20mA current signal input and posterior 4-20mA current signal output ,is a Part Number Power Supply T1100L None Input 4-20mA Output Isolation Channels Power Output 4-20mA None 1 Package DIP12 passive signal isolation module .the series adopt magneto design and high efficiency loop electric-larceny technology ,efficiently reducing the reliance of current signal isolation on the power ,realize 4-20mA standard signal isolation with high accuracy and line regulation. Besides, the modules have extremely low temperature drift (no more than 35ppm/℃ under -25°C to +71 °C) .The isolation voltage between the input and output can up to 3KVDC. ELECTRICAL CHARACTERISTICS Power Supply None Power Dissipation None Power Protection None Input Signal 4 -20mA Input Impedance Voltage Drop≤250mV(At input signal=20mA) Overload ≤300mA ● High accuracy (0.1% F.S.) Voltage Drop <3V(20mA) ● High linearity (0.1% F.S.) Output Signal 4 -20mA Load ≤300Ω（At output Signal=20mA） Load Regulation ＜0.05% meas.val./100Ω Power Supply Data FEATURES ● Two-port isolation（Between input and output） ● Isolation voltage(3000VDC/60S) ● Low voltage-drop(At 20mA<3V) Input Data Output Data ● Extremely low temperature(35PPM/°C) ● Industry standard(Operating Temperature Range:-25°C to 71°C) ● High reliability(MTBF＞500,000 hours) TRANSMISSION CHARACTERISTICS Offset 0.1%F.S. Gain Error 0.1%F.S. Temperature Drift 0.0035%F.S./°C(-25°C to +71 °C) ISOLATION CHARACTERISTICS MODEL SELECTION TXXXXL Package style Isolation power output Power supply Output Input Isolation Am plifier MORNSUN Science & Technology co.,Ltd. Address: 2th floor 6th building, Huangzhou Industrial District, Guangzhou, China Tel: 86-20-38601850 Fax:86-20-38601272 Http://www.mornsun-power.com Galvanic Isolation Two-port isolation（Between input and output） Isolation Voltage 3KVDC (Tested for 1minute and 1mA max, humidity < 70%) Insulation Resistance 100MΩ,500VDC（Between input and output） OTHER CHARACTERISTICS Ambient temperature Operation temperature:-25°C to +71°C Transport and Storage temperature:-50°C to +105°C Package SIP12 Weight About 8g Application Environment No dusts, gases of fiercely vibration, impulsion or gases that may erode to the components surrounded Note: 1. All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified. 2. Only typical models listed, specifications of custom product may be different. Please contact our service people directly for certain conditions. The copyright and authority for the interpretation of the products are reserved by Mornsun Specifications subject to change without notice. T1100L A/1-2008 Page 1 of 2 SCHEMATIC DIAGRAM APPLICATION NOTE 1. Please read instruction book carefully before Iin- 2- Iout+ Signal input please contact with our technical support. 2. Please don’t install in the dangerous zone. Signal output Iin+ 1+ using the product. If you have any question, 12+ 11+ Iout- 3. Don’t divide the product privately in case the equipments ineffective or go wrong. 109- AFTER SERVICE 1. Products are carefully inspected and controlled before going out from our factory. If they operated abnormally or there were anything APPLICATION CIRCUIT DIAGRAM wrong in the inner parts, please contact with our agents near you or technical support in our company as soon as possible. 2. 3 years warranty since the delivery date. During the period of quality guarantee，our company will repair or change free of charge if product has any quality problem in the process of normally using. S ig nal o u tpu t Si gna l in pu t APPLICATION CIRCUITS See A GUIDE TO INSTRUMENTATION ISOLATION AMPLIFIERS for more detail. PACKAGING SIZE AND TERMINAL DESCRIPTION First Angle Projection (Side View) 0.50 (0.020) RECOMMENDED FOOTPRINT Top view,grid:2.54mm(0.1inch) diameter:1.00mm(0.039inch) 1 2 9 101112 (Bottom View) Note: Unit:mm(inch) Pin section:0.50*0.3mm(0.020*0.012inch) Pin section tolerances:± 0.05mm(± 0.002inch) General tolerances:± 0.25mm(± 0.010inch) The copyright and authority for the interpretation of the products are reserved by Mornsun FOOTPRINT DETAILS Pin Function Input+ InputOutputOutput+ Specifications subject to change without notice. T1100L A/1-2008 Page 2 of 2