GIGABIT RJ-45 JACK WITH MAGNETIC MODULE N5601 • 1000 Base-T Single Port RJ-45 Jack with Magnetic Module • Available with a variety of internal magnetic filter designs to support all PHYs • Available with or without LEDs • RoHS Compliant Product • Operating Temp : 0°C to +70°C • Hipot: 1500VRMS • Custom design and configuration available upon request ELECTRICAL SPECIFICATION @ 25°C PART NO N5601 TURNS INSERTION RETURN LOSS CROSS TALK DCMR RATIO LOSS (dB) Min (dB) min (dB) min ±2% 0.3-100MHz MHz MHz MHz TX RX (dB) Max 1-30 40 50 60-80 30 60 100 30 60 100 1CT:1 1CT:1 -1.2 -16.0 -13.5 -11.5 -10.0 -40 -36 -30 -35 -32 -30 Schematic Recommended PCB LAND PATTERN 0.350 [8.89] Ø0.035 [Ø0.89] (10) 0.050 [1.27] 9 1 Ø0.067(2) [Ø1.70] 10 2 0.100 [2.54] 0.250 [6.35] 0.120 [3.05] 0.160 [4.06] 11 12 0.036 [0.91] 0.100 [2.54] 13 14 0.450 0.522 [11.43] [13.26] 0.610 [15.49] Ø0.128 [Ø3.25] (2) Ø0.040 [Ø1.02] (4) Suggested PCB Layout (Component side view) Dimensions Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ± 0.015 .XXX : ±0.004 mm: X,X : ± 0,38 X,XX : ±0,10 Product performance is limited to specified parameter. Data is subject to change without prior notice. 13200 Estrella Ave., Bldg. B Gardena, CA 90248 Tel: (310) 325-1043 Fax: (310) 325-1044 N5601 0852AL www.mpsind.com [email protected]