1XN RJ-45 10/100 BASE-T JACK WITH MAGNETIC MODULE

1XN RJ-45 10/100 BASE-T JACK
WITH MAGNETIC MODULE
N5101 SERIES
•
RJ-45 1xN, Tab-Down, 8 pin with internal magnetics
•
Available with and without LEDs
•
Suitable for CAT 5 and 6 Fast Ethernet cable or better UTP
•
Minimum 1500Vrms isolation per IEEE 802.3 requirement
•
Operating temperature range: 0°C to +70°C
•
RoHS compliant product
ELECTRICAL SPECIFICATION @ 25OC
Part
Number
Turns
Ratio
±2%
1xN
TX
Retrun Loss
(dB) Min
MHz
Insertion
RX
Loss
0.1-100MHz
(dB) Max
1-30
30-60
60-80
Cross Talk
(dB) Typ
MHz
CMR
(dB) Typ
MHz
1-100
30-100
N5101-2
1x2
1CT:1
1CT:1
-1.1
-18
-14
-12
-40
-35
N5101-4
1x4
1CT:1
1CT:1
-1.1
-18
-14
-12
-40
-35
N5101-6
1x6
1CT:1
1CT:1
-1.1
-18
-14
-12
-40
-35
N5101-8
1x8
1CT:1
1CT:1
-1.1
-18
-14
-12
-40
-35
Note:
•
Inductance: 350μH Min @ 100KHz, 0.1Vrms with 8mA DC
SCHEMATIC
Product performance is limited to specified parameters. Data is subject to change without prior notice. Tel: 310-325-1043
Fax: 310-325-1044
DIMENSIONS: N5101-2
Dimensions
Unless otherwise specified, all tolerances are:
inch: .XX : ±0.015 .XXX : ±0.004
mm: X,X : ±0,38 X,XX : ±0,10
www.mpsind.com
[email protected]
1XN RJ-45 10/100 BASE-T JACK
WITH MAGNETIC MODULE
N5101 SERIES
DIMENSIONS: N5101-4
DIMENSIONS: N5101-6
Product performance is limited to specified parameters. Data is subject to change without prior notice. Tel: 310-325-1043
Fax: 310-325-1044
Dimensions
Unless otherwise specified, all tolerances are:
inch: .XX : ±0.015 .XXX : ±0.004
mm: X,X : ±0,38 X,XX : ±0,10
www.mpsind.com
[email protected]
1XN RJ-45 10/100 BASE-T JACK
WITH MAGNETIC MODULE
N5101 SERIES
DIMENSIONS: N5101-8
Product performance is limited to specified parameters. Data is subject to change without prior notice. Tel: 310-325-1043
Fax: 310-325-1044
Dimensions
Unless otherwise specified, all tolerances are:
inch: .XX : ±0.015 .XXX : ±0.004
mm: X,X : ±0,38 X,XX : ±0,10
www.mpsind.com
[email protected]