Gigabit RJ-45 USB Combo with Magnetic Module N6111 • Shielded RJ-45 connector with integrated Gigabit Ethernet magnetics and dual USB connector • Complies with IEEE 802.3ab standards and all Gigabit Ethernet applications including 350µH with 8mA DC Bias • Compatible with a variety of Gigabit Ethernet tranceiver ICs and 10/100BASE-TX transceiver ICs • Minimum interwinding breakdown voltage of 1500Vrms • Operating temperature: 0°C to 70°C • Storage temperature: -40°C to 85°C ELECTRICAL SPECIFICATION @ 25°C Insertion Loss Return Loss (dB max.) (dB min.) Common to Common Mode Rejection (dB min.) Common to Diferential Mode Rejection (dB min.) Crosstalk (dB min.) 0.1-100 MHz 100-125 MHz 0.5-40 MHz 40-100 MHz 0.1-100 MHz 0.1-100 MHz 0.1-100 MHz -0.8 -1.2 -18 -12+20Log (f/80MHz) -30 -35 -33+20Log (f/100MHz) • Note: 1) Contact: Phosphor Bronze, 6 micro-inch gold flashed (Unless specified) 4)Operating Life: 750 cycles min. 2) Different metal shielding (Nickel Plated Copper Alloy) 5) PCB retention pre-solder: 1 Lb min. 3) Housing: Thermoplastic, flammability rating UL94V-0 6) PCB retention post- solder: 10 Lbs min. • Other versions available with alternate pin-out configurations. Contact MPS Engineering Team. Schematic Product performance is limited to specified parameter. Data is subject to change without prior notice. 13200 Ave.,205 Bldg. B 2463 Estrella 208th, Ste. Gardena, CACA 90248 Torrance, 90501 N6111-A 0447TA 1 Tel: (310) 325-1043 http://www.mpsind.com www.mpsind.com Phone: (310)533-1455 Fax: (310) 325-1044 Email: [email protected] [email protected] Fax: (310)533-1853 Gigabit RJ-45 USB Combo with Magnetic Module Mechanical Dimensions Unless otherwise specified, all tolerances are: .XX ± 0.010” & .XXX ± 0.003” Inches [mm] Product performance is limited to specified parameter. Data is subject to change without prior notice. 2463 208th, Ste. 205 Torrance, CA 90501 Phone: (310)533-1455 Fax: (310)533-1853 N6111-A 0447TA 2 http://www.mpsind.com Email: [email protected]