PUSH-PULL TRANSFORMER • RoHS compliant • UL60950-1 compliant to reinforced insulation with working voltage of 100V • Operating frequency range: 200 ~ 250MHz • Low profile EFD20 platform ELECTRICAL SPECIFICATION @ 25°C Part Number Turns Ratio Pri. OCL (±2%) (µH min.) Leakage Inductance (µH max.) @10KHz 0.1Vrms @100KHz 0.1Vrms 2-4 3-5 8-10 9-11 @ 750Vrms 1 minute 90 90 1.0 0.3 .018 .030 .018 .030 .065 .085 .065 .085 0.5 0.5 P62701F P62702F 1:2.4 1:2.4 Mechanical 0.42 [10.60] max. 0.118 [3.00] MPS P6270XF D.C. 0.047 [1.20] (W max.) (mA max.) Pri. Sec. 2 8 4 3 10 9 5 11 1.19 [30.20] 0.94 [23.80] 0.591 [15.00] Suggested Pad Layout 1.03 [26.08] 0.017 [0.44] 6 0°~8° 0.118 [3.00] Isolation Schematic 0.85 [21.50] max. 0.85 [21.50] DCR 0.028 [0.70] .005 [0.13] 0.08 [2.05] Shield 1 Shield 2 7 1.15 [29.2] max. Dimensions Unless otherwise specified, all tolerances are: .XX ± 0.010” & .XXX ± 0.004” Inches [mm] Product performance is limited to specified parameter. Data is subject to change without prior notice. 2463 208th, Ste. 205 Torrance, CA 90501 Phone: (310)533-1455 Fax: (310)533-1853 P6270XF-1 0523TH http://www.mpsind.com Email: [email protected]