SMD POWER INDUCTOR PX11608 SERIES • RoHS Compliant Product • Inductance test @ 100KHz, 0.1VRMS @ 0ADC • Add -M for inductance tolerance ±20% after the part no. • IDC: 10% inductance drop typical from its initial value at IDC • IRMS: ∆40°C temperature rise max at IRMS • Operating Temperature: -40°C to +85°C • Marking: Value ELECTRICAL SPECIFICATION @ 25°C Part number L ±20% IDC (A) IRMS RDC MAX PX11608- (µH) (A) (A) (W) 102 1.0 2.9 2.9 0.05 152 1.5 2.6 2.8 0.06 222 2.2 2.3 2.4 0.07 272 2.7 2.1 2.1 0.08 332 3.3 2.0 2.0 0.08 472 4.7 1.5 1.5 0.09 682 6.8 1.2 1.4 0.13 822 8.2 1.15 1.3 0.16 103 10 1.10 1.2 0.16 153 15 0.90 1.1 0.23 223 22 0.70 0.80 0.37 333 33 0.58 0.60 0.51 473 47 0.50 0.50 0.64 683 68 0.40 0.40 0.86 104 100 0.31 0.30 1.27 154 150 0.27 0.25 2.00 224 220 0.22 0.20 3.11 334 330 0.18 0.16 3.80 474 470 0.16 0.15 5.06 684 680 0.14 0.12 9.20 105 1000 0.10 0.07 13.8 Mechanical 0.260 [6,60] max. 0.155 [3,94] 0.175 [4,45] max. 0.108 [2,74] 0.050 [1,27] 0.040 [1,02] 0.055 [1,40] 0.170 [4,32] Min Schematic S F Product performance is limited to specified parameter. Data is subject to change without prior notice. Phone: (310)533-1455 Fax: (310)533-1853 0.140 [3,56] Suggested Pad Layout Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ± 0.015 .XXX : ±0.010 mm: X,X : ± 0,38 X,XX : ±0,25 2463 208th, Ste. 205 Torrance, CA 90501 0.115 [2,92] max. PX11608-XX 0602JW http://www.mpsind.com Email: [email protected]