AZ55 Limit Switches HIGHLY RELIABLE DIN SIZE LIMIT SWITCHES • Design conforms to DIN size Mounting distance and dimensions: DIN43694 Screw hole for conduit: DIN40430 Pg13.5 • Utilizes the same basic switch as the AZ5 series PRODUCT TYPE Roller plunger Flexible rod Part No. AZ5501 AZ5502 AZ5506 Roller arm AZ5524 Adjustable rod AZ5527 Adjustable roller arm AZ5528 Actuator Plunger SPECIFICATIONS Rating 125V AC 250V AC 115V DC Resistive load (cosφ = 1) 10A 6A 0.8A Inductive load (cosφ = 0.4) N.C. contact Motor or lamp load N.O. contact 6A 4A 2A 4A 2.5A 1.2A 0.1A 0.1A 0.1A Rated control voltage Characteristics Contact arrangement Initial contact resistance, max. Initial insulation resistance (At 500V DC) Initial breakdown voltage Shock resistance Vibration resistance Mechanical Expected life (Min. operations) Electrical Ambient temperature Ambient humidity 460 1 Form Z 25mΩ Min. 100MΩ 1,000Vrms for 1 min Between terminals 1,500Vrms for 1 min Between dead metal parts and each terminal 1,500Vrms for 1 min Between ground and each terminal Max. 30G 55Hz, double amplitude of 1.5mm 107 (at 50 cpm) 5x105 (at 20 cpm, rated load) +5 to +80°C +41 to +176°F Max. 95%R.H. AZ55 Operating Characteristics Operating Force (O.F.), max. (g oz) Release Force (R.F.), min. (g oz) Pretravel (P.F.), max. (mm inch) Movement Differential (M.D.), max. (mm inch) Overtravel (O.T.), min. (mm inch) 2,720 95.95 910 32.10 1.7 .067 1.0 .039 6.4 .252 2,720 95.95 142 5.01 910 32.10 — 1.7 .067 29 1.142 1.0 .039 — 5.6 .220 — Roller arm 900 31.75 50 1.76 18° to 25° 15° 60° Adjustable rod 2) 244 8.61 14 .49 18° to 25° 15° 60° 900 31.75 50 1.76 18° to 25° 15° 60° Actuator Plunger Roller plunger Flexible rod 1) Adjustable roller arm Notes: 3) 1) Characteristics measured at the top of rod. 2) Characteristics measured at the center distance of 141mm 5.551 inch. 3) Characteristics measured at the center distance of 38.1mm 1.500 inch. DIMENSIONS • Plunger type mm inch 17 .669 dia. Pretravel 1.7 .067 max 9.2 .362 dia. stainless steel plunger 16 .630 M3.5x 12 M3.5x 12 34.7±0.65 1.366±.026 20.7±0.8 .815±.031 5.3 .209 dia. mounting hole 60±0.2 2.362±.008 72.5 2.854 6 .236 7.3 .287 30±0.2 1.181±.008 AZ5501 5.3 .209 40+1 –0 1.575+.04 –0 Pg 13.5 (DIN 40430) 7 .276 deep 1 .039 16 Cap 37 .630 1.457 43±1 1.693±.039 • Roller plunger type 17 .669 dia. x 4.7 .185 wide stainless steel roller 17 .669 dia. Pretravel 1.7 .067 max M3.5x 12 M3.5x 12 47.7±0.8 1.878±.031 16 .630 30.5 1.201 5.3 .209 dia. mounting hole 60±0.2 2.362±.008 72.5 2.854 6 .236 AZ5502 30±0.2 1.181±.008 7.3 .287 5.3 .209 40+1 –0 1.575+.04 –0 Pg 13.5 (DIN 40430) 7 .276 deep 1 .039 16 Cap 37 .630 1.457 43±1 1.693±.039 General tolerance: ±0.4 ±.016 461 AZ55 • Flexible rod type mm inch 16 .630 Pretravel 29 1,142 max 25 .984 6.7 .264 dia. max 143.9±0.8 5.665±.031 Rubber cap M3.5x12 M3.5x12 5.3 .209 dia. mounting hole 60±0.2 2.362±.008 72.5 2.854 6 .236 7.3 .287 30±0.2 1.181±.008 5.3 .209 1 .039 16 Cap .630 37 1.457 43±1 1.693±.039 Pg 13.5 (DIN 40430) 7 .276 deep 40+1 –0 1.575+.04 –0 AZ5506 61.1±2 2.406±.059 56±2 2.205±.079 42±2 1.654±.079 dia. x 6.4 .252 wide s steel roller • Roller arm type 16 .630 M3.5x27 M5 x 11 1 8. R3 28.3±0.8 1.114±.031 M3.5x 12 20.5 .807 5.3 .209 dia. mounting hole 60±0.2 2.362±.008 72.5 2.854 6 .236 7.3 .287 30±0.2 1.181±.008 AZ5524 5.3 .209 40+1 –0 1.575+.04 –0 • Adjustable rod type 33±0.8 1.299±.031 6.4 .252 aluminum rod 1 .039 16 37 .630 1.457 43±1 1.693±.039 55.9±0.8 2.201±.031 Pg 13.5 (DIN 40430) 7 .276 deep 55.9±0.8 2.201±.031 Cap 16 .630 3.2 DIA. 3.2 .126 dia. 141 max. 5.551 M3.5x 27 M5 x 8 28.3 1.114 M3.5x12 20.5 .807 5.3 .209 dia. mounting hole 60±0.2 2.362±.008 72.5 2.854 6 .236 30±0.2 1.181±.008 AZ5527 462 7.3 .287 5.3 .209 40+1 –0 1.575+.04 –0 1 .039 Pg 13.5 (DIN 40430) 7 .276 deep 16 37 .630 1.457 43±1 1.693±.039 Cap General tolerance: ±0.4 ±.016 AZ55 • Adjustable roller arm type mm inch 68.9±0.8 2.713±.031 63.8±0.8 2.512±.031 16 37.4±0.8 1.472±.031 .630 18 .709 dia. x 6.4 .252 wide nylon roller 25 to 90 .984 to 3.543 M3.5x 27 M4 16 .630 M5 28.3 1.114 20.5 .807 M3.5 x 12 5.3 .209 dia. mounting hole 60±0.2 2.362±.008 6 .236 30±0.2 1.181±.008 AZ5528 72.5 2.854 3.2 .126 7.3 .287 5.3 .209 40+1 –0 1.575+.04 –0 1 .039 Pg 13.5 (DIN 40430) 7 .276 deep 16 37 .630 1.457 43±1 1.693±.039 Cap General tolerance: ±0.4 ±.016 ADJUSTING METHOD Adjustable roller 1) A rotary actuator can be set and locked in any Adjustable head 2) An actuator head may be 3) A roller lever may be moved in 90˚ increments faced in or out. to any of four directions, by removing the four head screws. An actuator may be moved in 90˚ increments by removing the four actuator screws. DIN STANDARDS 1. Mounting distance and dimensions meet DIN43694. 2. Protective construction meets IEC IP65, but insulation distance and terminal construction do not meet VDE standards. 3. Operating position of AZ5501 and AZ5502 meet DIN43694. 4. There are no DIN standards specified for the operating position of AZ5506 and AZ5528. Only mounting distance and dimensions meet DIN43694. 463