SCHRACK General Purpose Relays Power Relay 430 3 mm n 1 pole 16 A, 1 NO contact n Safety mains isolation n Contact gap > 3 mm n DC- and AC-coil n 4 kV / 8 mm coil-contact, reinforced insulation (VDE 0700) n PCB mounting or quick connect terminals n Mounting brackets or snap mounting n Version with arc blow magnet for high DC-loads n Product in accordance to IEC60335-1 F0256-B Applications Domestic appliances, industrial appliances, industrial controls Approvals V REG.-Nr. C820, Z E214024 Technical data of approved types on request Contact data Contact configuration Contact set Type of interruption Rated voltage / max. switching voltage AC Rated current Maximum breaking capacity AC Limiting making capacity, max 4 s, duty factor 10% Contact material Contact gap Rated frequency of operation with / without load Contact ratings Type Contact Load IEC 61810 0430 .4 .. 0 0430 .4 .. 1 16 A, 250 VAC, cosϕ=1 16 A, 250 VAC, cosϕ=1 NO NO 1NO bifurcated contact full disconnection 250 / 400 VAC 16 A 4000 VA 25 A AgCu3, AgCdO > 3 mm 15 / 300 min-1 Ambient temp. [°C] Cycles 70°C 70°C 50x103 50x103 Coil data Rated coil voltage range DC coil AC coil Operative range to IEC 61810 Coil versions, DC-coil Coil Rated code voltage VDC 09 12 10 24 11 48 13 110 Operate voltage VDC 7.8 15.6 31.2 71.5 6...110 VDC 6...240 VAC 2 Release voltage VDC 0.6 1.2 2.4 5.5 Coil resistance Ohm 145+10% 580+10% 2200+10% 13000+10% Rated coil power mW 993 993 1047 931 Coil versions, AC-coil 50Hz Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VAC VAC VAC Ohm VA 23 24 18 3.6 145+10% 1.8 25 60 45 9.0 950+10% 1.8 26 110 83 16.0 3100+10% 1.8 27 230 175 35.0 11400+10% 1.8 28 240 185 36.0 13000+10% 1.8 All figures are given for coil without preenergization, at ambient temperature +23°C Other coil voltages on request 1 Datasheet Rev. IJ1 Issued 2009/10 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' section in the catalogue or at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change. SCHRACK General Purpose Relays Power Relay 430 3 mm (Continued) Insulation PCB layout / terminal assignment Dielectric strength coil-contact circuit open contact circuit Clearance / creepage coil-contact circuit Material group of insulation parts Tracking index of relay base Insulation to IEC 61810-1 Type of insulation coil-contact circuit open contact circuit Rated insulation voltage Pollution degree Rated voltage system Overvoltage category Bottom view on solder pins 4000 Vrms 2000 Vrms W 8 / 8 mm IIIa PTI 250 reinforced full disconnection 3 mm 250 V 3 230 / 400 V III Other data S0448-AE Mechanical endurance > 2.5x105 cycles Material RoHS - Directive 2002/95/EC compliant as per product date code 0349 Environment Ambient temperature range -20...+70°C Shock resistance (destruction) 100 g Category of protection RT I - dust protected Processing Mounting pcb, mounting brackets, snap mounting, DIN rail Resistance to soldering heat 270°C / 10 s Relay weight 32 g Packaging unit 50 pcs Dimensions S0448-AF Snap mounting S0449-CB S0449-CH 2 Datasheet Rev. IJ1 Issued 2009/10 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' section in the catalogue or at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change. SCHRACK General Purpose Relays Power Relay 430 3 mm (Continued) Dimensions Mounting brackets DIN-rail mount S0449-CK S0449-AD Product key Typical product key 0430 2 5 09 1 100 Type 0430 Power relay 430 3 mm Mounting 0 PCB version 1 mounting brackets Contact design 4 arc blowing magnet 5 standard Coil Coil code: please refer to coil versions table Contact material 0 AgCu 3 Version 100 standard Other types on request Product key 0430 25 0911 00 0430 25 1011 00 0430 25 2811 00 Version snap mounting 1.0mm plate 2 5 snap mounting DIN-rail mounting 1 AgCdO Cont-material AgCdO Cont.configuration 1 NO contact Coil DC-coil AC-coil Coil 12 VDC 24 VDC 240 VAC Part number 1-1415404-1 1-1415404-3 1-1415404-6 3 Datasheet Rev. IJ1 Issued 2009/10 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' section in the catalogue or at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change.