SBD MODULE 160A/40V PQ160QH04N OUTLINE DRAWING FEATURES φ * Four-Arms, Cathode Common to Base Plate * Low Forward Voltage Drop * Low Power Loss, High Efficiency * High Surge Capability * UL Recognized, File No. E187184 TYPICAL APPLICATIONS * High Frequency Rectification Maximum Ratings Voltage Rating Repetitive Peak Reverse Voltage Repetitive Peak Surge Reverse Voltage Approx Net Weight:250g Symbol PQ160QH04N Unit VRRM VRRSM 40 45 (Pulse Width ≤ 1 µsec, Duty ≤1/50) V V Electrical Rating Average Rectified Output Current Condition IO RMS Forward Current IF(RMS) Surge Forward Current IFSM Operating JunctionTemperature Range Storage Temperature Range Tjw Tstg Mounting torque Ftor 50Hz Half Sine Wave, per Arm Tc=Tl=102°C (Tl=Terminal Temperature) Per Arm 50 Hz Half Sine Wave,1cycle Non-repetitive, per Arm Case mounting(recommended) Terminal Screw(recommended) Rating 160 A 226 A 2800 A -40 to +150 °C -40 to +125 °C 3.0 N•m 2.6 Electrical • Thermal Characteristics Characteristics Peak Forward Voltage Peak Reverse Current Symbol Test Conditions VFM IFM= 120A, Tj=25°C, per Arm IRM VRM= VRRM, Tj= 150°C, per Arm Rth(j-c) Junction to Case, per Arm Thermal Resistance Base Plate to Heat Sink with Thermal Rth(c-f) Compound We recommend the use of the electrical conductive grease. In case of parallel use, consider in balance of the current of each arms. Terminal Temperature must be less than Tc. (ex. Cooled by air blow) Max. Unit 0.58 1000 0.34 0.03 V mA °C/W PQ160QH04N OUTLINE DRAWING (Dimensions in mm) φ