NJM2582 4CH VIDEO AMPLIFIER FOR SCART ■ GENERAL DESCRIPTION The NJM2582 is a 4ch video amplifier for SCART connecter. It can output DC that conforms to the SCART connector. The NJM2582 is suitable for the video application with the SCART connector. ■ PACKAGE OUTLINE NJM2582V ■ FEATURES ● Operating Voltage ±5V, +5V, +11V ● 6input 4output ● 2input 1output Video SW ● Internal LPF ● 6dB Amplifier ● Internal 75Ω Driver Circuit ● DC output for SCART (FUNCTION SW, BLANKING) ● Power Save Circuit ● Bipolar Technology ● Package Outline SSOP32 ■BLOCK DIAGRAM VIN 1 Bias VYDCCONT 2 SYIN 3 5MHz 6dB Amp 75Ω Driver LPF 32 V/SYOUT 31 NC 30 SC/ROUT 29 NC 28 V+2 27 GOUT 26 GND2 25 BOUT 24 V-2 23 V+S1 (5V) 22 BLANKING 21 GNDS 20 NC 19 FunctionSW 18 V+S2 (11V) 17 WIDE Bias V+1 4 5MHz SCDCCONT 5 SCIN 6 GND1 7 75Ω Driver LPF Bias 5MHz RIN 6dB Amp 6dB Amp 75Ω Driver LPF 8 Bias NC 9 GIN 10 5MHz Bias 6dB Amp 75Ω Driver LPF V-1 11 BIN 12 Bias PS1(SC/Rmute) PS2(G,Bmute) MUTE 13 DISCEXT 14 EUROVY 15 RGBSEL 16 PS3(V/Ymute) SW SW MATRIX Ver.9 -1- NJM2586 NJM2582 NJM2587 ■ABSOLUTE MAXIMUM RATINGS (Ta=25°C) PARAMETER SYMBOL + Supply Voltage1 V /V + Supply Voltage2 V Power Dissipation PD Operating Temperature Range Topr Storage Temperature Range Tstg RATINGS ±6.5 +13 1250(Note1) -40 to +85 -40 to +150 UNIT V V mW °C °C (Note1) At on a board of EIA/JEDEC specification. (114.3 x 76.2 x 1.6mm Two layers, FR-4) ■ RECOMMENDED OPEARATING CONDITION (Ta=25°C) PARAMETER Operating Voltage1 Operating Voltage2 Operating Voltage3 SYMBOL Vopr1 Vopr2 Vopr3 TEST CONDITION V+1, V+2, V+S1 V-1, V-2 V+S2 + + - - MIN. TYP. MAX. UNIT 4.5 -5.5 10.5 5.0 -5.0 11.0 5.5 -4.5 11.5 V V V + + ■ELECTRICAL CHARACTERISTICS (Ta=25°C,V 1 to V 2=5V, V 1 to V 2=-5V, V S1=+5V,V S2=+11V, RL=150Ω) ▪ Input signal condition (SYIN, VIN, RIN, GIN, BIN) Video sync tip= 0V, Sine Signal Bottom= 0V (SCIN) Offset= 0.6V PARAMETER SYMBOL TEST CONDITION (Note2) No Signal V+=5V, V-=-5V, VYDCCONT=L (Note2) No Signal Operating Current2 Iee2 V+=5V, V-=-5V, VYDCCONT=L (Note2) No Signal Operating Current3 ICC3 V+=5V, V-=-5V, VYDCCONT=H (Note2) No Signal Operating Current4 Iee4 V+=5V, V-=-5V, VYDCCONT=H Operating Current (Note3) No Signal Isave at Power Save V+=5V Maximum Output Voltage (SYIN, VIN, RIN, GIN, BIN) Vom Swing Vin=100kHz, Sine Signal, THD=1% (SYIN, VIN, RIN, GIN, BIN) Voltage Gain1 Gv1 Vin=1MHz, 1.0Vp-p, Sine Signal (SCIN) Voltage Gain2 Gv2 Vin=4.43MHz, 0.3Vp-p,Sine Signal Gain Difference (SYIN, VIN, RIN, GIN, BIN) ∆GvI Between channel Vin=1MHz, 1.0Vp-p,Sine Signal (SYIN, VIN, RIN, GIN, BIN) Gfy5M 5MHz/1MHz, 1.0Vp-p, Sine Signal Low Pass Filter Characteristic 1 (SYIN, VIN, RIN, GIN, BIN) Gfy27M 27MHz/1MHz, 1.0Vp-p, Sine Signal (SCIN) Gfc5M 5MHz/4.43MHz, 0.3Vp-p, Sine Signal Low Pass Filter Characteristic 2 (SCIN) Gfc27M 27MHz/4.43MHz, 0.3Vp-p, Sine Signal (Note2) MUTE, DISCEXT, EUROVY = H , WIDE, RGBSEL = L (Note3) MUTE = L Operating Current1 -2- ICC1 MIN. TYP. MAX. UNIT - 45.0 60.0 mA -45.0 -35.0 - mA - 45.0 60.0 mA -55.0 -40.0 - mA - 4.0 5.5 mA 3.0 4.0 - Vp-p 5.6 6.0 6.4 dB 5.6 6.0 6.4 dB -0.2 0 +0.2 dB -1.0 0 0.5 dB - -25.0 -14.0 dB -1.0 0 0.5 dB - -25.0 -14.0 dB NJM2586 NJM2582 NJM2587 + + - - + + ■ELECTRICAL CHARACTERISTICS (Ta=25°C,V 1 to V 2=5V, V 1 to V 2=-5V, V S1=+5V,V S2=+11V, RL=150Ω) PARAMETER SYMBOL Group Delay GD Cross talk CT Differential Gain DG Differential Phase DP S/N Ratio SN TEST CONDITION 5MHz/1MHz (SYIN, VIN, RIN, GIN, BIN) 4.43MHz, 1.0Vp-p, Sine Signal (SCIN) 4.43MHz, 0.3Vp-p, Sine Signal (SYIN, VIN, RIN, GIN, BIN) Vin=1.0Vp-p, 10step Video Signal (SYIN, VIN, RIN, GIN, BIN) Vin=1.0Vp-p, 10step Video Signal (SYIN, VIN, RIN, GIN, BIN) Vin=1.0Vp-p,100% White video signal, RL=75Ω,100KHz to 6MHz + + - - MIN. TYP. MAX. UNIT - 8.0 - nSec - -70 - dB - 0.3 - % - 0.3 - deg - 80 - dB + + ■ELECTRICAL CHARACTERISTICS (Ta=25°C,V 1 to V 2=5V, V 1 to V 2=-5V, V S1=+5V,V S2=+11V, RL=150Ω) PARAMETER Switch Change Voltage High Level Switch Change Voltage Low Level SYMBOL VthH VthL TEST CONDITION MUTE, DISCEXT, EUROVY, RGBSEL WIDE, VYDCCONT, SCDCCONT MUTE, DISCEXT, EUROVY, RGBSEL WIDE, VYDCCONT, SCDCCONT MIN. TYP. MAX. UNIT 2.5 - V + V 0 - 1.0 V V/SY Output Voltage H VSYH TP1, VYDCCONT=H -0.4 -0.3 -0.2 V V/SY Output Voltage L VSYL TP1, VYDCCONT=L -0.1 0.0 0.1 V SC Output Voltage H VSCH TP2, SCDCCONT=H -0.7 -0.6 -0.5 V SC Output Voltage L VSCL TP2, SCDCCONT=L -0.1 0.0 0.1 V RGB Output Voltage VRGB TP2, TP3, TP4 0.0 - 2.0 V VFH TP6 10.0 - 11.0 V VFM TP6 5.3 - 6.3 V VFL TP6 - - 1.5 V VBH TP5 1.5 - 2.5 V VBL TP5 - - 0.3 V ISWH - - 120 uA ISWL - - 8 uA Function Switch Output Voltage H Function Switch Output Voltage M Function Switch Output Voltage L Blanking Output Voltage H Blanking Output Voltage L Switch inflow current High Level Switch inflow current Low Level -3- NJM2586 NJM2582 NJM2587 ■LOGICAL TABLE MUTE H H H H H H H H L L L L L L L L INPUT 4chAMP OUT MONITOR DISCEXT EUROVY RGBSEL V V H H H H H L V, RGB RGB SY SY H L H H L L * * V L H H L H L V, RGB TV Mode SY L L H L L L * H H H H H L OFF H L H 4ch OFF H L L L H H TV Mode L H L L L H L L L 4ch OFF TV Mode * No use INPUT DISCEXT WIDE H H H L L H L L MUTE DISCEXT EUROVY RGBSEL WIDE VYDCCONT SCDCCONT -4- H L H L H L H L H L H L H L OUTPUT Function SW M H L L 4chAMP ON 4chAMP OFF DVD MODE TV MODE V OUT SY/SC OUT RGB OFF RGB ON 16: 9 4: 3 -0.3V 0V -0.6V 0V Mode DVD TV BLANKING L H L L L H L L L H L L L L L L No use NJM2586 NJM2582 NJM2587 ■EQUIVALENT CIRCUIT PIN No. PIN NAME 1 VIN 3 SYIN 6 SCIN 8 RIN 10 GIN 12 BIN EQUIVALENT CIRCUIT DC VOLTAGE NOTE V+1 270 0V 20k GND1 V-1 2 VYDCCONT 5 SCDCCONT 13 MUTE 14 DISCEXT 15 EUROVY 16 RGBSEL 17 WIDE 58k 48k 0V GND V-1 V+2 19 0V 6V 10.5V 4.1k FunctionSW V-2 V+S1 16k 22 0V 2.1V Blanking 80k GND V-2 -5- NJM2586 ■EQUIVALENT CIRCUIT PIN No. PIN NAME NJM2582 NJM2587 EQUIVALENT CIRCUIT DC VOLTAGE V+2 25 BOUT 27 GOUT 30 SCROUT 0V, -1.2V, 0.1V 32 VSYOUT 0V, -0.6V 0.1V 4.1k V-2 -6- 0.1V NOTE NJM2586 NJM2582 NJM2587 ■TEST CIRCUIT 1 VYDCCONT, SCDCCONT=H VEE -5V + 1 VIN TP1 75Ω VYDCCONT 3 SYIN VCC 5V V/SYOUT 32 75Ω 2 47uF 75Ω + NC 31 47uF TP2 SC/ROUT 30 75Ω 75Ω 4 V+1 5 SCDCCONT 6 SCIN 0.1uF 75Ω NC 29 V+2 28 0.1uF TP3 GOUT 27 75Ω 75Ω 7 GND1 GND2 26 8 RIN BOUT 25 75Ω TP4 75Ω 75Ω 9 NC V-2 24 10 GIN V+S1 (5V) 23 11 V-1 12 BIN 13 MUTE 14 DISCEXT 75Ω 0.1uF BLANKING 75Ω 0.1uF 0.1uF 5V 22 75Ω 10kΩ GNDS 21 TP5 75Ω 75Ω NC 20 390Ω TP6 FunctionSW 19 10kΩ 15 16 EUROVY RGBSEL V+S2 (11V) 18 WIDE 17 VCC 11V 0.1uF + 47uF -7- NJM2586 NJM2582 NJM2587 ■TEST CIRCUIT 2 VYDCCONT, SCDCCONT=L VEE -5V + 10uF + 1 VIN V/SYOUT 32 75Ω TP1 + 470uF 2 VYDCCONT + 3 SYIN SC/ROUT 30 75Ω 4 V+1 5 SCDCCONT 6 SCIN V+2 28 GOUT 27 75Ω + 7 GND1 GND2 26 8 RIN BOUT 25 75Ω + 9 NC V-2 24 10 GIN V+S1 (5V) 23 11 V-1 12 BIN 13 MUTE 14 DISCEXT 75Ω 0.1uF 10uF + 75Ω 75Ω 0.1uF TP3 + BLANKING 75Ω 75Ω TP4 + 470uF 10uF 47uF TP2 470uF 10uF + NC 29 10uF + 75Ω + 470uF 0.1uF 75Ω VCC 5V NC 31 10uF 47uF 75Ω 75Ω 0.1uF 0.1uF 5V 22 75Ω 10kΩ GNDS 21 TP5 75Ω 75Ω NC 20 390Ω TP6 FunctionSW 19 10kΩ 15 16 -8- EUROVY RGBSEL V+S2 (11V) 18 WIDE 17 VCC 11V 0.1uF + 47uF NJM2586 NJM2582 NJM2587 ■APPLICATION CIRCUIT VEE -5V + CVBS SY Video DAC 1 VCC 5V V/SYOUT 32 75Ω SC 2 VYDCCONT 3 SYIN R G B VIN 75Ω + NC 31 4 V+1 TV SCART 15 75Ω 0.1uF 47uF 19 SC/ROUT 30 75Ω 47uF NC 29 7 5 SCDCCONT 6 SCIN V+2 28 16 11 8 0.1uF GOUT 27 75Ω 75Ω 7 GND1 GND2 26 8 RIN BOUT 25 75Ω 75Ω 9 NC 10 GIN V-2 24 V+S1 (5V) 23 75Ω 0.1uF 11 V-1 BLANKING 22 12 BIN GNDS 21 13 MUTE 14 DISCEXT FunctionSW 19 15 EUROVY V+S2 (11V) 18 0.1uF 0.1uF 5V 75Ω 10kΩ 75Ω VYDCCONT SCDCCONT MUTE Micon DISCEXT EUROVY RGBSEL WIDE NC 20 390Ω 16 RGBSEL VCC 11V 0.1uF + 47uF WIDE 17 [CAUTION] The specifications on this databook are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this databook are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights. -9-