SH Series Precision Metal-Clad Shunts L3 ±2 L1 ±1.5 6.5ø 10 slot ø6.0 holes 60mm ±.5 30mm ±.2 40mm ±.5 ø6.5 holes L2 ±1.5 400mm ±10 Precision metal clad resistors designed in four-terminal technique, are distinguished by high load capacity as well as excellent accuracy. Isolated voltage and current connections making them suitable for very precise current measurements. The simple four port Kelvin design ensures easy installationon large current bus bars. Units have a low inductance, heavy copper terminals. Applications include: battery testing, current detection in precise power sources, constant current sources, industrial power conversion circuits, HEVs, fuel cells and constant electronic loads. S p e c i f i ca t i o n s Temp. Range: -55°C ~ +110°C Insulation Resist.: 100MΩ min. Dielectric Withstanding Voltage: AC 500V for 1 minute Temp. Coefficient: Max. 30ppm/°C [20°C and 60°C] 30mm ±.5 P erforman c e D ata Rated Current Series (A) SH2 100 150 200 Rated Voltage (mV) 100 100 100 Resistance (mΩ) 1.0000 0.6666 0.5000 Mass (g) 650 650 650 Dimensions (mm) L1 L2 L3 ±1.5 ±2 ±2 146 165 225 146 165 225 146 165 225 SH3 250 300 100 100 0.4000 0.3333 1100 1100 196 196 215 215 Test Short Time Overload Moisture Resistance Thermal Shock Vibration Moisture Load Life Load Life Method Maximum ∆R 5x Power rating 5 sec. ±0.3% 40°C, 95% RH, DC100V case to terminal, 500 hours ±0.5% -65°C 30 minutes, +90°C 30 minutes 25 cycles ±0.2% 10Hz-55Hz-10Hz (1min.), 2 hours each direction ±0.2% 40°C, 95% RH, 0.1XPower rating 1.5 hours on, ±0.5% 30 minutes off, 500 hours Power rating 1.5 hours on, 30 min. off, 500 hours ±0.5% 275 275 S tandard part n u m b ers F or S H S eries O R D E R I N G I N F O R M AT I O N RoHS Compliant SH2-200R0005DE Series Size Current Resistance see table Tolerance B = ±0.1% D = ±0.5% Part Rated Current (A) Rated Voltage (mV) Resistance Resistance (mΩ)Tolerance SH2-100R0010DE SH2-150R0006DE SH2-200R0005DE 100 150 200 100 100 100 1.0000 0.6666 0.5000 0.5% 0.5% 0.5% SH3-250R0004DE SH3-300R0003DE 250 300 100 100 0.4000 0.3333 0.5% 0.5% Ohmite Mfg. Co. 1600 Golf Rd., Rolling Meadows, IL 60008 • 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • [email protected] 1