PG100RS THRU PG108RS GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER VOLTAGE - 50 to 800 Volts CURRENT - 1.0 Ampere FEATURES l Plastic package has Underwriters Laboratory Flammability Classification 94V-O Utilizing A-405 l l Flame Retardant Epoxy Molding Compound Glass passivated junction 1 ampere operation at TA=55 ¢J with no thermal runaway l Exceeds environmental standards of MIL-S-19500/228 l Fast switching for high efficiency MECHANICAL DATA Case: Molded plastic, A-405 Terminals: axial leads, solderable per MIL-STD-202, Method 208 Polarity: Color band denotes cathode Mounting Position: Any Weight: 0.008 ounce, 0.22 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ¢J ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. PG100RS PG101RS PG102RS PG104RS PG106RS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current .375"(9.5mm) lead length at TA=55 ¢J Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load(JECEC method) Maximum Forward Voltage at 1.0A Maximum Full Load Reverse Current Full Cycle Average, .375”,9.5mm Lead Length at TA=55 ¢J Maximum DC Reverse Current at Rated DC Blocking Voltage TA=100 ¢J 50 35 50 Maximum Reverse Recovery Time(Note 1) Typical Junction capacitance (Note 2) Typical Thermal Resistance (Note 3) R £KJA Operating and Storage Temperature Range TJ 150 100 70 100 150 200 140 200 150 400 280 400 600 420 600 PG108RS 800 560 800 UNITS V V 1.0 V A 30 A 1.3 5.0 V £g A 150 £g A 150 250 15 67 -55 to +150 NOTES: 1. Measured with IF=.5A, IR=1A, Irr=.25A 2. Measured at 1 MHz and applied reverse voltage of 4.0 VDC 3. Thermal resistance from junction to ambient at 0.375"(9.5mm) lead length P.C.B. mounted 500 ns PF ¢J /W ¢J RATING AND CHARACTERISTIC CURVES PG100RS THRU PG108RS trr +0.5A 0 -0.25 -1.0 NOTE:1.Rise Time = 7ns max. Input Impedance = 1 megohm. 22pF 2.Rise Time = 10ns max. 1cm SET TIME BASE FOR 50 ns/cm Source Impedance = 50 Ohms Fig. 1-REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 1 AVERAGE FORWARD RECTIFIED CURRENT AMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES 10 TJ = 25 ¢J 0.1 PULSE WIDTH = 300£gs 1% DUTY CYCLE 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.6 1.4 MAXIMUM AVERAGE CURRENT RATING SINGLE PHASE, HALF WAVE 60Hz 1.2 RESISTIVE OR INDUCTIVE LOAD .375"(9.5mm) LEAD LENGTHS 1.0 .8 .6 .4 .2 0 0 20 40 60 80 100 120 140 160 AMBIENT TEMPERATURE, ¢J INSTANTANEOUS FORWARD VOLTAGE, VOLTS Fig. 3-FORWARD CURRENT DERATING CURVE CAPACITANCE, pF 100 TJ = 25 ¢J 10 1 1 10 100 REVERSE VOLTAGE, Vdc Fig. 4-TYPICAL JUNCTION CAPACITANCE FORWARD SURGE CURRENT, AMPERES pk (HALF-SINE WAVE) Fig. 2-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 30 24 18 12 6 1 2 4 6 8 10 20 40 60 80 100 NUMBER OF CYCLES AT 60Hz Fig. 5-PEAK FORWARD SURGE CURRENT 180