Ultra Low Jitter PLL Crystal Oscillator 7.0 x 5.0mm JX701 2.5V/3.3V CMOS XO 7.0 x 5.0mm Ceramic SMD Package: Recommended Land Pattern: Product Features • Very low phase jitter - 0.8ps RMS typical • Thicker crystal for improved reliability • Low supply current - 45mA max. • Industrial Temperature Range • Pb-free & RoHS compliant • Fast lead time CREATED USING CADSTD LITE FREEWARE FROM WWW.CADSTD.COM. NON-COMMERCIAL USE ONLY. *Note: pads 2 and 5 are optional (shown as dotted lines). XO's are designed to fit on industry standard, 4 pad layouts. Product Description The JX701 XO series is a high performance CMOS crystal oscillator family with very low jitter performance. It supports various options including wider frequency range, 2.5V/3.3V voltage, and various stabilities. It is designed to meet the clock source specifications for communication systems, and other high performance equipment. Pin Functions: Applications • Networking systems • Servers and storage systems Pin Function 1 OE Function 2 N/C 3 Ground 4 Output 5 N/C 6 V DD *Extended high frequency power decoupling is recommended (see test circuit for minimum recommendation). To ensure optimal performance, do not route RF traces beneath the package. • Profession video equipments • Test and measurement Part Ordering Information: • FPGA/ASIC clock generation WXJX70701 V A Voltage: 1=+3.3V 2=+2.5V SaRonix-eCera™ is a Pericom® Semiconductor company • I1 FFFF.FFFFFF FFFF.FFFFFF B C Stability and Temp Range: Stability A = +/-20 ppm B = +/-25 ppm C = +/-50 ppm D = +/-25 ppm E = +/-50 ppm Temp Range -20/+70°C -20/+70°C -20/+70°C -40/+85°C -40/+85°C Frequency: FFFF.FFFFFF MHz, “4 digits/decimal/6 digits” format US: +1-408-435-0800 TW: +886-3-4518888 • www.pericom.com 11-0003 All specifications are subject to change without notice. JX701XO Rev D 02/11/11 1 JX701 2.5V/3.3V CMOS XO Ultra Low Jitter PLL Crystal Oscillator 7.0 x 5.0mm Electrical Performance Parameter Min. Output Frequency Typ. Max. Units 212.5 MHz 3.135 3.3 3.465 2.375 2.5 2.625 10 Supply Voltage Notes V See ordering options Supply Current, Output Enabled 45 mA Supply Current, Output Disabled only 20 mA Frequency Stability ±50 ppm See ordering options +85 °C See ordering options 0.4 V 15 pF Operating Temperature Range -40 Output Logic 0, VOL Output Logic 1, VOH V DD -0.4 V Output Load Duty Cycle 45 Rise and Fall Time 800 Jitter, Phase RMS (1-σ) 55 % Measured 50% V DD 1600 ps Measured 20/80% of waveform ps 12kHz to 20 MHz frequency band ps 100,000 random periods 0.8 Jitter, pk-pk V DD = 3.3V 20 40 Jitter, pk-pk V DD = 2.5V 40 50 Notes: 1. Stability includes all combinations of operating temperature, load changes, rated input (supply) voltage changes, initial calibration tolerance (25°C), aging (1 year at 25°C average effective ambient temperature), shock and vibration. 2. For specifications othere than those listed, please contact sales. Output Enable / Disable Function Parameter Min. Input Voltage (pin 1), Output Enable Typ. Max. Units 0.7 V DD Input Voltage (pin 1), Output Disable (low power standby) 0.3 V DD Internal Pullup Resistance 51 Notes V or open V Output is Hi-Z kΩ Output Disable Delay 200 ns Output Enable Delay 200 ns Start up Time 10 ms Absolute Maximum Ratings Parameter Storage Temperature Min. Typ. -55 Max. Units +125 °C Notes For the latest product information visit: http://www.pericom.com/products/timing/oscillators/ For test circuit go to: http://www.pericom.com/pdf/sre/tc_6pcmos.pdf For soldering reflow profile and reliability test ratings go to: http://www.pericom.com/pdf/sre/reflow.pdf For tape and reel information go to: http://www.pericom.com/pdf/sre/tr_7050_xo.pdf SaRonix-eCera™ is a Pericom® Semiconductor company • US: +1-408-435-0800 TW: +886-3-4518888 • www.pericom.com 11-0003 All specifications are subject to change without notice. JX701XO Rev D 02/11/11 2